Seasonal dynamics of elemental sulfur in two coastal sediments

A spectrophotometric method for elemental sulfur (S⁰) analysis without interference from other reduced sulfur compounds was adapted for the use in reducing sediments. The S⁰ distribution in two coastal sediments was studied regularly from summer to winter and compared to factors regulating the S⁰ accumulation, such as redox potentials, the rate of bacterial sulfide production and the general sulfur chemistry. Dense coatings of sulfur bacteria developed on the sediment surface of a sulfuretum which had an S⁰ concentration of up to 41 μmol S cm^?3. The 2·5-mm thick bacterial coating contained 40% of all S⁰ in the sediment. A more typical marine sediment with a few cm thick oxidized surface layer had an S⁰ maximum of 1–3 μmol S cm^?3 at 2–4 cm depth. The S⁰ maximum in both sediments increased from summer to winter as the sediments gradually became more oxidized. The deeper layers maintained a low S⁰ concentration. Most of the S⁰ in the upper few mm of a laboratory sulfuretum was present inside sulfur bacteria and actively migrated up and down with the bacteria depending upon the changing light and oxygen conditions.     

Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.     

油气化探同步荧光技术中的若干问题

在试验的基础上,对油气化探固定波长同步荧光测试技术中光谱图的认识、波长差与方法灵敏度的关系以及同步荧光与其他荧光方法的内在关系等问题作了深入的研究和探讨,澄清了该技术在实际应用工作中较易产生混淆的几个问题,旨在推动该项技术在油气化探工作中的进一步应用和发展.     

建筑物沉降监测专家分析系统设计与开发

建筑物沉降监测数据分析与处理是一项较复杂的系统工程,本文从自动化处理观点出发,介绍了设计沉降监测专家分析系统的咨询新理念和主体思想,探讨了开发选用的数学模型与开发过程,以期为相关变形监测与分析提供帮助和启示.     

Numerical simulation of migration–accumulation of oil resources

Numerical simulation of oil migration and accumulation is to describe the history of oil migration and accumulation in basin evolution. It is of great value to the evaluation of oil resources and to the determination of the location and amount of oil deposits. This thesis discusses the characteristics of petroleum geology and permeation fluid mechanics. For the three-dimensional problems of Dongying hollow of Shengli Petroleum Oil Field, it puts forward a new model and a kind of modified method of upwind finite difference fractional steps implicit interactive scheme. For the famous hydraulic experiment of secondary migration–accumulation, the numerical simulation test has been done, and both the computational and experimental results are basically identical. For the actual problem of Dongying hollow, the numerical simulation test and the actual conditions are basically coincident. Thus, the well-known problem has been solved.     

我国煤炭航测技术的最新发展

中国煤炭地质总局航测遥感局作为我国煤炭航测技术的主要单位,承担着95％以上的煤炭矿区航测成图任务,并逐步发展成为我国集航空摄影、遥感地质、地图制印、地下管线探测、地理信息技术等全面发展的空间信息产业集团：伴随着计算机技术的发展,煤炭航测技术走过了从模拟测图到解析测图,最后发展到今天的全数字测图的历程。目前煤航已拥有和掌握了IMU／DGPS辅助航空摄影技术、SAR（合成孔径雷达）成图技术、LIDAR（机载激光扫描）技术等空间数据采集最新技术。     

Experimental investigation of the elastic modulus of a fractal system—A model of fractured rocks

The elastic properties of a physical model representing a damaged rock matrix were studied using a square lattice deformed under tensile stress. The elastic modulusM of such a system varies in agreement with percolation theory as|x–x _c | ^f , wherex is the damage parameter andx _c the threshold value of the damage parameter,f3.6. Atxx _c the scale dependence ofM can be expressed asML ^–f/v , whereL is the size of the sample andv the correlation exponent in percolation theory.The experimental results are of interest in assessing elastic properties in earthquake focal zones and fault zones in general.     

Characterization of cristobalite in ash and dome rock from the Soufriere Hills volcano, Montserrat： Implications for respiratory health hazards

A link between the inhalation of respirable silicas （SiO2） and respiratory diseases such as silicosis is widely recognized. Ash from dome collapse eruptions on Montserrat has been found to contain high levels （〉20%） of silicas in the form of cristobalite, tridymite, quartz and/or amorphous silica. The toxicity of these silica polymorphs varies widely. Cristobalite and quartz （tridymite less well established） are viewed as carcinogenic to humans whereas amorphous silica generally shows a reduced biological response. In assessing the potential health effects of volcanic ash particulates it is vital to determine the types and concentration of silicas as well as their size （respirable fraction）, shape and surface properties. The aim of this study is to develop methods to assess potentially toxic respirable airborne silicas in the dome collapse ash （applicable to a range of ash types） and to develop a model to predict the levels and types of respirable silicas from future eruptions. The model is being developed by comparing dome rock with related ash from a series of previous eruption events. Mineralogical assessment using conventional scanning X-ray diffraction （XRD） was hampered by difficulties in differentiating characteristic peaks for cristobalite and tridymite in complex multi-component ash samples （containing high levels of plagioclase）. These difficulties have been largely overcome using an Enraf-Nonius PDS120 diffractometer with curved （120 degrees 20） position sensitive detector （PSD）. The determination of size, shape and elemental characteristics of ash particulate and dome rock samples has been carried out using automated analytical scanning electron microscopy. The quantification of mineral proportions using PSD-XRD was highly successful with an accuracy of 1 to 2 wt%. However, the determination of phase proportions using automated analytical SEM was problematic due to scattering effects and the multiphase nature of many of the particles.     

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.