多向随机波浪反射的试验研究

试验研究了多向随机波浪在直立式防波堤和斜坡式防波堤前的反射情况。在试验中，改变波浪要素(波陡、周期)、波浪入射角度(正向、斜向)和方向分布以及防波堤的坡度，以充分研究这些因素对波浪反射的影响。遗传算法用来分析多向随机波从建筑物的反射。试验结果表明，直立堤的反射系数基本上不随入射波浪方向变化，斜坡堤的反射系数随波浪峰频的增大和堤坡的变缓而减小，且随波浪方向有一定变化。还探讨了多向随机波浪在斜坡式防波堤上的反射面位置问题。     

双通道实时数据采集处理系统的设计与实现

本文提出了一种基于 TMS32 0 C31串行接口的双通道实时数据采集处理系统的设计与实现方案 ,该设计以 TMS32 0 C31和 TL C32 0 AD5 0 C为核心器件 ,具有两个独立的 A/D,D/A通道 ,能够实现 32位浮点计算和 16位数据采集与回放。应用该系统进行归一化最小均方误差 (Normal-ized L east Mean Square,NLMS)算法实时自适应噪声抵消实验 ,实验结果表明 ,该系统能够实现实时的自适应噪声抵消 ,可广泛应用于实时语音信号处理等领域。     

空间点集卷包裹算法的优化实现

凸包计算是计算几何研究中的基本问题之一 ,在许多领域均有应用。本文对求解空间点集凸包的卷包裹算法的实现问题进行了讨论。提出了 2点优化措施 ,并解决了实现中可能出现的共面点及由此带来的退化问题。     

Numerical simulation of solitary wave propagation based on MPS method

The concept of candidate particle set is introduced in the MPS gridless numerical method to generate neighboring particle set matrix, which can reduce the CPU time to 1/11 of that before introduction. The Bi-CGSTAB (bi-conjugate gradient stabilized) algorithm is applied to solving the Poisson pressure equation, by which the solving speed is significantly accelerated. The process of solitary waves propagating over a numerical flume and interacting with a vertical wall is simulated. The simulated results of water surface elevation are in good agreement with the analytical solution as well as the measured data. The predicted maximum values of the run-up of solitary waves with various relative incident wave heights agree well with the measured results.     

Extraction method of component waves in full waveform acoustic data and its application

In conventional slowness-time coherence(STC)method,slowness and time need to be searched at the same time,which limits the precision and lowers the efficiency.The dichotomy method combined with slowness-time coherence algorithm aims to enhance the efficiency of data processing and to improve the precision.The algorithm changes the searching pattern of conventional slowness-time coherence method to acquire the slowness of component waves in array acoustic logging data.Based on energy ratio of short time window versus long time window and slowness-time coherence method,the algorithm first acquires the arrivals of the component waves using energy ratio of short time window versus long time window method.It then uses the calculated results as the arrivals in conventional slowness-time coherence method,so the slowness-time two-dimensional searching process is simplified to slowness searching process.Based on dichotomy method,the searching pattern is further optimized in replace of the ergodic searching pattern in conventional slowness-time coherence method,which means that as the iteration proceeds,the current searching interval is reduced to half of the former,so the number of searching times is decreased.The dichotomy method combined with slowness-time coherence algorithm is applied to well L in the data processing.Compared with conventional slowness-time coherence method,for compressional wave,the searching efficiency of the algorithm is 4.53 times better,while for Stoneley wave,the searching efficiency is 1.85 times better.Compared with conventional logging data,the average absolute error of the results of the dichotomy method combined with slowness-time coherence algorithm is 1.14μs/ft smaller than that of the conventional method,while the average relative error is 1.2 percent lower.The dichotomy method combined with slowness-time coherence algorithm shows good results in its application,which can enhance the processing efficiency remarkably while getting reliable results at the same time.     

Single‐and multi‐objective genetic algorithm optimization for identifying soil parameters

This paper discusses the quality of the procedure employed in identifying soil parameters by inverse analysis. This procedure includes a FEM‐simulation for which two constitutive models—a linear elastic perfectly plastic Mohr–Coulomb model and a strain‐hardening elasto‐plastic model—are successively considered. Two kinds of optimization algorithms have been used: a deterministic simplex method and a stochastic genetic method. The soil data come from the results of two pressuremeter tests, complemented by triaxial and resonant column testing. First, the inverse analysis has been performed separately on each pressuremeter test. The genetic method presents the advantage of providing a collection of satisfactory solutions, among which a geotechnical engineer has to choose the optimal one based on his scientific background and/or additional analyses based on further experimental test results. This advantage is enhanced when all the constitutive parameters sensitive to the considered problem have to be identified without restrictions in the search space. Second, the experimental values of the two pressuremeter tests have been processed simultaneously, so that the inverse analysis becomes a multi‐objective optimization problem. The genetic method allows the user to choose the most suitable parameter set according to the Pareto frontier and to guarantee the coherence between the tests. The sets of optimized parameters obtained from inverse analyses are then used to calculate the response of a spread footing, which is part of a predictive benchmark. The numerical results with respect to both the constitutive models and the inverse analysis procedure are discussed. Copyright © 2011 John Wiley & Sons, Ltd.     

Intelligent control for modeling of real‐time reservoir operation,part II: artificial neural network with operating rule curves

To bridge the gap between academic research and actual operation, we propose an intelligent control system for reservoir operation. The methodology includes two major processes, the knowledge acquired and implemented, and the inference system. In this study, a genetic algorithm (GA) and a fuzzy rule base (FRB) are used to extract knowledge based on the historical inflow data with a design objective function and on the operating rule curves respectively. The adaptive network‐based fuzzy inference system (ANFIS) is then used to implement the knowledge, to create the fuzzy inference system, and then to estimate the optimal reservoir operation. To investigate its applicability and practicability, the Shihmen reservoir, Taiwan, is used as a case study. For the purpose of comparison, a simulation of the currently used M‐5 operating rule curve is also performed. The results demonstrate that (1) the GA is an efficient way to search the optimal input–output patterns, (2) the FRB can extract the knowledge from the operating rule curves, and (3) the ANFIS models built on different types of knowledge can produce much better performance than the traditional M‐5 curves in real‐time reservoir operation. Moreover, we show that the model can be more intelligent for reservoir operation if more information (or knowledge) is involved. Copyright © 2004 John Wiley & Sons, Ltd.     

̨�庣Ͽ�����ؿ�����˶�����

????1995~2003????GPS????????????????????????? ?????????GPS????????????????????????????仯????????????????????????????????????????????????????,??1995~1997???2001~2003???????????????????????????????????????????????????С??????н??仯??????仯????????1999????弯??7.6?????????????????????????     

Assessing radial transmissivity variation in heterogeneous aquifers using analytical techniques

Pumping tests are one of the most commonly used in situ testing techniques for assessing aquifer hydraulic properties. Numerous researches have been conducted to predict the effects of aquifer heterogeneity on the groundwater levels during pumping tests. The objectives of the present work were as follows: (1) to predict drawdown conditions and to estimate aquifer properties during pumping tests undertaken in radially symmetric heterogeneous aquifers, and (2) to identify a method for assessing the transmissivity field along the radial coordinate in radially symmetric and fully heterogeneous transmissivity fields. The first objective was achieved by expanding an existing analytical drawdown formulation that was valid for a radially symmetric confined aquifer with two concentric zones around the pumping well to an N concentric zone confined aquifer having a constant transmissivity value within each zone. The formulation was evaluated for aquifers with three and four concentric zones to assess the effects of the transmissivity field on the drawdown conditions. The specific conditions under which aquifer properties could be identified using traditional methods of analysis were also evaluated. The second objective was achieved by implementing the inverse solution algorithm (ISA), which was developed for petroleum reservoirs to groundwater aquifer settings. The results showed that the drawdown values are influenced by a volumetric integral of a weighting function and the transmissivity field within the cone of depression. The weighting function migrates in tandem with the expanding cone of depression. The ability of the ISA to predict radially symmetric and log‐normally distributed transmissivity fields was assessed against analytical and numerical benchmarks. The results of this investigation indicated that the ISA method is a viable technique for evaluating the radial transmissivity variations of heterogeneous aquifer settings. Copyright © 2013 John Wiley & Sons, Ltd.     

基于GA-Sarma算法的边坡最不利滑裂面搜索方法

传统方法在选取潜在滑裂面关键点时,未综合考量剪切滑裂点、受拉滑裂点对搜索过程的影响程度,导致搜索过程易陷入局部最优,从而丢失其他同等级搜索数据。针对这一问题,本研究设计了基于GA-Sarma算法的边坡最不利滑裂面搜索方法。该方法通过计算边坡稳定性系数的实际值提取边坡潜在滑裂面,然后根据剪切滑裂点、受拉滑裂点的特性,选取潜在滑裂面关键点。进而,基于GA-Sarma算法建立目标函数和适应度函数,在考虑变异的前提下搜索边坡的最不利滑裂面。实验测试区域中包含3处最不利滑裂面、5处刚刚形成且危险程度偏低的滑裂面、14处潜在滑裂面。测试结果表明：在20轮测试中,本文方法与两组传统方法搜索到的最不利滑裂面个数平均值分别为3处、1.4处以及0.8处,从而验证了GA-Sarma算法强化了边坡最不利滑裂面搜索效果。该方法可为边坡支护、加固及改造等地质工作提供更加可靠的技术支持。