Measurement of the spatial distribution of fluvial bedload transport velocity in both sand and gravel

Maps are presented of the spatial distribution of two‐dimensional bedload transport velocity vectors. Bedload velocity data were collected using the bottom tracking feature of an acoustic Doppler current pro?ler (aDcp) in both a gravel‐bed reach and a sand‐bed reach of Fraser River, British Columbia. Block‐averaged bedload velocity vectors, and bedload velocity vectors interpolated onto a uniform grid, revealed coherent patterns in the bedload velocity distribution. Concurrent Helley‐Smith bedload sampling in the sand‐bed reach corroborated the trends observed in the bedload velocity map. Contemporaneous 2D vector maps of near‐bed water velocity (velocity in bins centered between 25 cm and 50 cm from the bottom) and depth‐averaged water velocity were also generated from the aDcp data. Using a vector correlation coef?cient, which is independent of the choice of coordinate system, the bedload velocity distribution was signi?cantly correlated to the near‐bed and depth‐averaged water velocity distributions. The bedload velocity distribution also compared favorably with variations in depth and estimates of the spatial distribution of shear stress. Published in 2004 by John Wiley & Sons, Ltd.     

A comparative study on the illite crystallinity and the clay mineral reflectance spectral index for subdividing the very low-grade metamorphic belt along the Lizhou-Hekou geological section in the Youjiang sedimentary basin, Guangxi, China

To examine the application potential of hyperspectral remote sensing techniques in classifying very low-grade metamorphic belts, the composition of clay minerals and the cyrstallinity of illite from mudstones were measured using XRD and VIS-SWIR (400-2500 nm) reflectance spectroscopy. Based on the illite cyrstallinity, Kubler Index (KI), the Early Triassic LuoLou Group and the Middle Triassic lower Baifeng Formation were classified as the lower Epizone with KI△2θ° ranging from 0.22 to 0.25, the upper Baifeng Formation as upper anchizone with KI△2θ°ranging from 0.26 to 0.33, and the Hekou Formation as lower anchizone with KI△2θ° ranging from 0.38 to 0.40. According to a KI△2θ° value of 0.43, it is possible that there may exist a local diagenetic zone in the upper strata. The illite cyrstallinity Kubler index and the metamorphic grade increase from the bottom to the top of the stratigraphic sequence. The metamorphic grade boundaries nearly match the stratigraphic boundaries, indicating a burial metamorphism nature for the stratigraphic sequence. From the bottom to the top of the sequence, the spectral absorption band center of clay minerals from fresh rocks is around 2200 nm. The absorption band centers change towards shorter wavelengths: the Luolou Group being at 2220 nm, the Baifeng Formation at 2217-2213 nm, the lower member of the Hekou Formation at 2214-2206 nm, and the upper member of the Hekou Formation at 2205-2197 nm. The spectral absorption band center of illite shows the same change pattern. These results indicate that very low-grade metamorphic belts can be subdivided using spectral indices of clay minerals, which are measured by using field portable spectroradiometers. However, it may not work well with satellite and airborne sensors.     

TRMM卫星微波成像仪分级产品及其反演降水算法

文章叙述了获取定量降水信息的意义，简要介绍了对热带测雨卫星TRMM(Tropical Rainfall Measurement Mission)的仪器、美国国家宇航局提供的微波成像仪TMI(TRMM Microwave Imager)分级产品。对比了物理方法和经验方法反演降水的特点，并对一些经验方法以及倾斜对流系统对反演降水的影响、动态聚类分析、神经网络反演方法的研究成果进行了介绍。     

测试超细煤粉粒度的实验研究

利用激光粒度仪测试超细煤粉的粒度。对测试超细煤粉试样粒度时的试样浓度、测试温度、分散时间、分散剂的种类及浓度等方面的影响进行了实验研究，给出了激光粒度仪测试超细煤粉粒度的最佳实验条件。     

裂变径迹长度测量标准化研究——锆石蚀刻标准探讨

通过不同时间蚀刻的锆石径迹长度测量,确定海南迅速冷却火山型锆石的水平封闭径迹(HCT)平均长度L＝10.93 μm,标准偏差为0.93 μm,可作为锆石长度测量的参照标准.对锆石的蚀刻标准进行了探讨,确立垂直C轴的表面径迹宽度Dpar为(1.0±0.5)μm的蚀刻标准,要求Dpar>1 μm和Dpar<1 μm的颗粒数应大致相当,以及封闭径迹宽度DHCT<1.0 μm的测量标准.     

利用VB编程完成基点网联测中的各项计算

整套重力计算程序包括了除“地改”以外的所有项目的计算，在这篇文章中我们先仅介绍了“测区参数初始化”及“基点网联测”(采用三程小循环方式)的计算方法。“测区参数初始化”功能可生成gdw．csh初始化文件(该套程序的各项功能都要读取该文件中的相关参量)；“基点网联测”功能可计算基点网联测的各项精度，对联测进行平差，求出各分基点绝对重力值。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

引力位虚拟压缩恢复法

提出了一种将地球表面的引力位虚拟地压缩到地球内部的一个球体表面 ,进而求解在整个地球外部空间 (包括地球边界上 )的重力位场以及重力场的方法     

地球重力场与KBR系统频谱关系的建立与分析

以近极圆形轨道的SST-Ⅱ为研究目标，利用解析的方法分析卫星间精密测距与地球重力场的频谱关系，得出了一般情况下300km高度的SST，星间距离每增加100km，恢复能力提高约10阶次；对于500km卫星高度的SST，星间距离每增加100km，恢复能力提高约5阶次的结论。研究成果可以为我国发展SST探测地球重力场的卫星计划提供参考。     

用遗传算法反演地壳的变密度模型

用青藏高原布格重力异常资料 ,结合亚东 格尔木地学断面得到的Moho面结构 ,反演了青藏高原中部地壳内密度随深度变化的指数分布函数 ,试验得出地壳表层与地幔的密度差约为 - 0 .92 6 g·cm-3 ,地壳的平均密度值为 2 .75 0 g·cm-3 。