基于环形扫面测量的三维直流电阻率法任意各向异性模型响应特征

高精度地下任意各向异性介质电性分布特征识别是当前的热门研究课题。本文以国内外前人工作为基础,基于非结构化网格,利用基于梯度恢复的后验误差估计指导网格自适应细化过程,实现了直流电阻率法三维有限元数值模拟。通过与一维模型半解析解的对比,验证了本文算法的有效性。考虑到电各向异性介质在观测中存在视电阻率反常现象,本文采用了环形扫面测量方法。通过对几种典型各向异性模型的模拟分析,得到了相应的各向异性影响规律和识别特征,各向异性主轴电阻率之间的比值大小决定了椭圆型视电阻率极性曲线长轴与短轴的比值大小,主轴电阻率的旋转方向会改变视电阻率极性曲线的形状。本文的算法研究及数值模拟技术可为直流电法数据精细处理和解释提供技术支撑。     

南黄海西部2007年4月的逆温跃层

利用南黄海西部2007-04的温盐实测资料,采用海洋层结谱表达法及自适应识别,得到逆温跃层的"五点三要素",形成强度要素平面分布图.分析表明,逆温跃层的存在与黄海暖流水有直接的关系:1)4月份,黄海暖流水受到的海面冷却仍是产生逆温跃层的普遍原因,在该海区黄海暖流向北延伸和向两侧拓展的区域都有该种类型的逆温跃层存在,位置相对较浅;2)但在偏南的黄海暖流主干区,海面冷却产生的效应被主流区的热量补充所抵消,逆温跃层很弱甚至消失,这是该月份逆温跃层分布区向北退缩并在南部中心附近呈现缺失区的主要原因;3)南下的鲁北沿岸流水的冷水叠加在黄海暖流水的暖水上方,使逆温跃层加强,使得冷暖水的作用区成为强逆温跃层区;4)黄海暖流左侧冷沿岸流水及右侧冷水的前端向黄海暖流楔入,其前端往往覆盖在底层高温高盐的黄海暖流水上方形成下逆温跃层,从而形成双逆温跃层.这些特点,较以前认知更加客观、全面、细致和准确.     

Adaptive Observer Based Backstepping Controller Design for Dynamic Ship Positioning

Modified adaptive observer based backstepping control system for dynamic positioning of ship is proposed. As an improvement, the adaptive observer takes the first-order wave frequency model and the bias term which represent the slowly varying environmental disturbances and the unmodeled dynamics. Thus, the wave-frequency motions are filtered out, and only the reconstructed low-frequency motions are sent as inputs of the controller. Furthermore, as the ship dynamics parameters are unknown, the adaptive estimation law is designed for both the unknown ship dynamics and the unmeasured state variables. Based on the estimated states and parameters, backstepping controller considering the integral action is designed. Global exponential stability (GES) for the total system is proved using Lyapunov direct method. Simulation results show a good performance of the observer and control system.     

Mass rig system for shaking table tests of slender columns

A new mass rig system is proposed to minimize the deficiencies in current shaking table testing setups. This is accomplished by placing the inertial mass on a convex path designed to impose P‐Delta demands on slender cantilever columns. The design and performance of the mass rig system, and the principles used in deriving the equations of motion and their analytical validation against results obtained from shaking table tests, are presented. Formulation of the governing equations of motion was based on Lagrangian mechanics and solved using an implicit linear acceleration method with an adaptive time step formulation. Friction developed in the sliding system was also incorporated in the equations of motion. Experimental results validated the accuracy in the derivation and solution of the equations of motion. Validated by analytical and experimental results, P‐Delta effects were found to increase the displacement demands on slender columns in the low‐frequency range of acceleration input, while in the high‐frequency range P‐Delta effects led to no increase and in some cases even a reduction in displacement demands. Copyright © 2015 John Wiley & Sons, Ltd.     

中国大陆速度场模型建立方法研究

将中国大陆划分成东北、华北、华南、青藏、西北5个块体,基于克里金插值法、最小二乘配置法、最小二乘配置移动拟合推估法等3种方法及速度场数据研究中国大陆速度场模型建立方法。利用外检点分析不同建模方法的精度情况,最小二乘配置法在大部分块体（华北、华南、东北块体）的拟合精度都较高,表现稳定|克里金插值法在青藏、华北块体的拟合精度较高。利用克里金插值法与最小二乘配置法获取中国大陆1°×1°格网中心点速度场成果,两种方法成果差异较小。     

Statistical models for shear strength of RC beam‐column joints using machine‐learning techniques

This paper proposes a new set of probabilistic joint shear strength models using the conventional multiple linear regression method, and advanced machine‐learning methods of multivariate adaptive regression splines (MARS) and symbolic regression (SR). In order to achieve high‐fidelity regression models with reduced model errors and bias, this study constructs extensive experimental databases for reinforced and unreinforced concrete joints by collecting existing beam‐column joint subassemblage tests from multiple sources. Various influential parameters that affect joint shear strength such as material properties, design parameters, and joint configuration are investigated through tests of statistical significance. After performing a set of regression analyses, the comparison of simulation results indicates that MARS approach is the best estimation method. Moreover, the accuracy of analytical predictions of the derived MARS model is compared with that of existing joint shear strength relationships. The comparison results show that the proposed model is more accurate compared to existing relationships. This joint shear strength prediction model can be readily implemented into joint response models for evaluation of earthquake performance and inelastic responses of building frames. Copyright © 2014 John Wiley & Sons, Ltd.     

土木工程结构鲁棒控制的发展

评述了结构控制的发展,指出发展结构鲁棒控制策略的重要性。重点评述了结构双重调谐质量阻尼器(DTMD)和多重双重调谐质量阻尼器(MDTMD)的控制策略,提出了需进一步发展主动双重调谐质量阻尼器(ADTMD)和主动多重双重调谐质量阻尼器(AMDTMD)控制策略、此外,评述了结构鲁棒控制的设计准则与高层建筑和大跨桥梁在风与地震作用下的统一自适应主动鲁棒控制策略。     

融合多源重力数据的Tikhonov正则化配置法

针对最小二乘配置法在融合处理多源重力数据过程中可能出现的病态性问题,特别引入Tikhonov正则化方法,对配置法计算模型进行正则化改造,建立了相应的正则化配置模型。使用EGM2008位模型模拟产生航空重力和海面船测重力数据进行了融合处理仿真实验,实际验证了正则化处理方法的有效性。     

岩土体渗流自由面问题的重心插值无网格方法

岩土体的渗透破坏、地下工程的防渗设计等无不与渗流计算有关。针对渗流自由面问题,提出一种重心拉格朗日插值的配点型无网格方法。由于渗流自由面问题的求解区域是不规则区域,该方法通过将不规则求解区域嵌入一个正则矩形区域,在正则区域上采用重心拉格朗日插值近似未知函数,利用配点法离散渗流问题的控制方程,将重心拉格朗日插值的微分矩阵离散成代数方程表达的矩阵形式。将自由面上的边界条件通过重心拉格朗日插值离散,通过置换方程法和附加方程法施加边界条件,利用正则区域上的重心插值配点法,通过迭代确定最终自由面的位置。数值算例表明所提出的无网格方法对于求解渗流自由面问题的正确性和高精度。     

Adaptive finite element modeling of marine controlled-source electromagnetic fields in two-dimensional general anisotropic media

In this paper, we extend the scope of numerical simulations of marine controlled-source electromagnetic (CSEM) fields in a particular case of anisotropy (dipping anisotropy) to the general case of anisotropy by using an adaptive finite element approach. In comparison to a dipping anisotropy case, the first order spatial derivatives of the strike-parallel components arise in the partial differential equations for generally anisotropic media, which cause a non-symmetric linear system of equations for finite element modeling. The adaptive finite element method is employed to obtain numerical solutions on a sequence of refined unstructured triangular meshes, which allows for arbitrary model geometries including bathymetry and dipping layers. Numerical results of a 2D anisotropic model show both anisotropy strike and dipping angles have great influence on the marine CSEM responses.