GPS单点测速的误差分析及精度评价 (英文)

Error sources which decrease the accuracy of GPS in absolute velocity determination have been changed since SA was turned off. Firstly, quantities of all kinds of error sources that influence velocity determination are analyzed. The potential accuracy of GPS absolute velocity determination is derived from both theory and field GPS data simulation. After that, two tests were carried out to evaluate the performance of GPS absolute velocity determination in the case of a static and an airborne GPS receiver and INS （Inertial Navigation System） instrument in kinematic mode. In static mode, the receiver velocity has been estimated to be several mm/s with the carrier-phase derived Doppler measurements, and several cm/s with the receiver generated Doppler measurements. In kinematic mode, GPS absolute velocity estimates are compared with the synchronized measurements from the high accuracy INS. The root mean square statistics of the velocity discrepancies between GPS and INS come up to dm/s. Moreover, it has a strong correlation with the acceleration or jerk of the aircraft.     

全站仪似水准法和对向法高程测量的比较研究

通过对似水准法和对向法高程测量原理、误差来源及精度的比较分析,我们发现随着距离和竖直角度的增大,对向法高程测量中误差的变化大于似水准法高程测量中误差的变化;当两观测点间的水平距离小于等于1km时,对向法高程测量精度一般高于似水准法高程测量精度,但是当两观测点间的水平距离大于1km时,似水准法高程测量精度一般高于对向法高程测量精度。     

基于LBV变换的遥感影像多步骤分类法研究

面对与日俱增的遥感数据,如何快速准确地进行影像分类成为遥感领域亟待解决的问题。本文在前人的基础上提出了一种基于LBV变换的遥感影像多步骤分类方法。L:地物的总辐射水平,集中反映了裸地的信息;B:地物的可见-红外光辐射平衡,是地面水分状况和水体存在的一个良好指标;V:地物辐射随波段变化的方向和速度向量,能集中反映地面植被状况。多步骤分类法遵循由易到难的原则,能克服类别之间的互相影响,从而提高分类精度。文章结合LBV变换和多步骤分类法的优点对影像进行了分类,结果表明该方法简单易行,且能达到良好的分类精度。     

火山热液型铅锌矿床岩石地球化学特征及预测指标

火山热液型铅锌矿床赋矿围岩、后期脉岩和蚀变岩石中成矿元素铅锌银含量高,矿体元素组合复杂,原生异常发育,并存在着原生分带现象。矿体前缘元素为I、Hg、As、Sb、B、Ba;近矿指示元素是Pb、Zn、Ag、Au、Cd、Mn、Cu;尾部或矿下指示元素为Cu、Mo、W、Sn。根据矿床指示元素的分布规律和原生晕的分带性,研制了判别矿床剥蚀程度和评价异常的地球化学指标,建立了该类矿床的地球化学找矿预测标志。     

商城县汤家坪钼矿地球化学特征及找矿远景

矿区地质、地球化学特征研究入手,总结了综合找矿标志,指出了进一步找矿方向。研究表明该矿床成矿组分单一,异常元素组合主要为Mo、Bi、Ag,次为W、Sn、Zn、Cu、Pb,仅有钼能形成较大规模的异常;矿床元素水平分带序列为(Mo-Bi-Ag)-(W-Sn)-(Pb-Zn-Cu),垂向分带序列为(Mo-Ag-Pb-Zn)-Cu-(Bi-W-Sn),并以w(Mo)/[w(Bi)×100]≥65,[w(Pb)×w(Zn)/w(W)×w(Sn)]≥25为判别标志,来预测深部盲矿体的存在。     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

舒兰市福安堡钼矿床地质特征及找矿意义

本文较详细地介绍了福安堡中型斑岩钼矿床的地质特征、找矿标志及找矿方法,对在吉林地区北部舒兰—蛟河一带分布的印支—燕山期花岗岩区寻找大、中型斑岩型钼矿床具有重要的指导意义。     

半参数平差模型估计量的精度评定

将半参数估计理论引入测量数据处理理论中,利用Blight和Ott提出的思想,用多项式函数来表示半参数平差模型中的非参数分量,从而得到了半参数平差模型中参数分量和非参数分量的Bayes估计量,通过理论证明,半参数模型参数分量的Bayes估计为通常意义下高斯马尔可夫模型参数估计值与参数期望的加权平均,是一致、渐近无偏和渐近有效估计量,并且其方差小于参数模型中参数估计量的方差。在一定情况下推广了平差理论,具有一定的理论价值。     

1∶500,1∶1000,1∶2000系列数字化测绘产品的精度目标与实现

1∶500,1∶1000,1∶2000系列数字化测绘产品按其生产工艺和用途的不同其精度规格也不尽相同,但产品的精度状况始终是测绘生产部门与用户所关心的问题。本文列举了现行有关规范的相关精度指标、规格,并结合产品的用途、特点和测绘生产的实际,简要阐述精度目标的控制与实现过程,对测绘实际工作有一定的参考价值。     

QuickBird影像制作1：10000DOM方法探讨

随着卫星遥感影像数据更加广泛地应用于测绘,针对QuickBird影像制作1：10000 DOM的方法,从正射纠正的三种不同方式进行了实验和探讨,分析了利用外业控制点或者在原有DRG、DOM上选取控制点制作DOM的方法、精度、工作量,总结提出了方便、快捷、实用的工作模式。