Drag Partition for Regularly-Arrayed Rough Surfaces

Vegetation and other roughness elements distributed across a surface can providesignificant protection against wind erosion by extracting momentum from the flowand thereby reducing the shear stress acting at the surface. A theoretical model haspreviously been presented to specify the partition of drag forces for rough surfacesand to predict required vegetation density to suppress wind erosion. However, themodel parameters have not yet been constrained and the predictive capacity of themodel has remained uncertain. A wind-tunnel study was conducted to measure thedrag partition for a range of roughness densities and to parameterise the model inorder to improve its range of potential applicability. The drag forces acting on bothan array of roughness elements and the intervening surface were measured independentlyand simultaneously using new drag balance instrumentation. A detailed measure of thespatial heterogeneity of surface shear stresses was also made using Irwin sensors. Thedata agreed well with previous results and confirmed the general form of the model.Analysis of the drag partition confirmed the parameter definition = C_R/C_S(where C_R and C_S are roughness element and surface drag coefficients,respectively) and a constant proportional difference between the mean and maximumsurface shear stress was found. The results of this experiment suggest that the definitionfor m, the surface shear stress inhomogeneity parameter, should be revised, although thetheoretical and physical reasons for including this parameter in the model appear to bevalid. Best-fit values for m ranged from 0.53 to 0.58.     

华南暴雨试验天气雷达数据处理及暴雨中尺度结构个例分析

文中描述了华南暴雨试验多普勒天气雷达数据的处理方法，建立了一套集图像显示、数据预处理及风场反演分析为一体的多普勒天气雷达的分析应用系统。该系统生成了三维正方形网格和经纬度网格的回波强度值，以及经噪声控制和速度扩展的径向速度风场，提交了华南暴雨试验雷达数据库。该文以1998年6月9日08:00(北京时) 探测数据为例，给出了华南暴雨试验区内4部多普勒天气雷达的反演雨强图和两部雷达的风场反演拼图，并进行了暴雨中尺度风场结构的初步分析。     

Effect of soil crusting on the emission and transport of wind-eroded sediment: field measurements on loamy sandy soil

Field data are reported for the horizontal and vertical flux of wind-eroded sediment on an agricultural field in northern Germany. Measurements were made during a windstorm that hit the region on 18 May 1999. The magnitude of both fluxes was significantly affected by the presence of a surface crust covering the test field. Measuring the physical crust strength at 45 locations with a torvane, the relationships between crust strength (τ) and the horizontal (F_h) and vertical (F_v) sediment fluxes were investigated. Both fluxes decreased as the surface crust became stronger. The decay behaved as an exponential function for both types of flux. The horizontal sediment flux over a crusted surface can be accurately predicted by completing Marticorena and Bergametti's [Journal of Geophysical Research 100 (1995) 16415] erosion model with a crust function. The vertical particle flux over crusted soil can be calculated by adding a similar function to Alfaro and Gomes's [Journal of Geophysical Research 106D (2001) 18075] dust production model. The study also suggests that the gradual bombardment of a surface crust by impacting particles does not immediately result in a decay of the crust's protective effect, provided that the crust has a minimum thickness. However, once the crust becomes perforated, its protective effect disappears very quickly, leading to much higher horizontal and vertical sediment fluxes than predicted for undamaged crusted soil.     

Aeolian modification of moraine soils,Whiskey Basin,Wyoming, USA

Soils along catenas of Pinedale (15–20 ka) and Bull Lake (100–130 ka) age moraines at Whiskey Basin in the Wind River Range, Wyoming, USA, were sampled to assess the effects of aeolian processes on soil development here. Aeolian processes appear to have in?uenced soils by both depositing sediments and eroding topsoils. Pedogenic silt (often used as an indicator of wind deposition) accumulated in the Bull Lake soils moderately correlate with pedogenic clay accumulated, suggesting that ?ne sediments may have been deposited and incorporated into soil formation here. Following removal of previous topsoil by wind during Pinedale glaciation, Bull Lake B horizons have developed into contemporary A horizons. These data further link aeolian processes to soil development on piedmont moraines throughout the Wind River Range. Copyright © 2004 John Wiley & Sons, Ltd.     

Measurements of Reynolds stress in a wind-driven lagoonal estuary

Acoustic Doppler current profilers (ADCPs) have been used to measure Reynolds stresses in tidally dominated environments where wave action was minimal. In this paper, we examine observations from a microtidal estuary where the effects of wind stress and surface waves dominate the velocity variance. Reynolds stress measurements in this setting require a technique for addressing surface gravity wave contamination. We present here a method of reducing the effect of wave motion on Reynolds stresses by subtracting coincident observations along the axis of the ADCP beam. Linear wave theory is used to account for the attenuation of wave orbital velocities with depth. Using this method, Reynolds stress values are brought in line with those predicted by drag laws at the surface and bottom. The apparent Reynolds stress that is removed by the along-axis subtraction is shown to be largely due to the interaction of a slight tilt (1°) in the ADCP and the wave orbital velocity. During periods of stronger wind and waves, there is evidence of enhanced near-surface turbulence and momentum flux, presumably due to breaking waves. During these events, our calculated Reynolds stress magnitudes still appear reasonable, although the directions are suspect. We develop a diagnostic technique that clearly demarcates this region when it occurs. Coincident density profile measurements are used with the ADCP data to compute gradient Richardson numbers throughout the water column. Enhanced Reynolds stresses appear to correspond to Richardson numbers less than one. Responsible editor: Alejandro Souza     

Aerodynamic drag coefficient and roughness length for three seasons over a tropical western Indian station

Land Surface Processes Experiment (LASPEX) was conducted over semi-arid region of western India in 1997. As a part of this program, wind and temperature observations were taken using slow as well as fast response sensors over a semi-arid station Anand (22°35′N, 72°55′E) situated in Gujarat state of India. Turbulent parameters such as drag coefficient and sensible heat flux were estimated using eddy correlation method and aerodynamic roughness length was estimated using wind profiles. The analysis has been carried out for the data representing summer, monsoon and winter seasons. It was found that the wind speed does not exceed 5 ms^− 1 during the observational period considered in this study. Relationship of aerodynamic drag coefficient and roughness length with wind speed and stability has been investigated. Aerodynamic roughness length was greater in the stable conditions when the wind speed was low and it reduced drastically during convective conditions. The resulting values of aerodynamic roughness length and drag coefficient for the monsoon period agree well with values reported in literature over Indian subcontinent for homogeneous grass covered surfaces.     

On the sensitivity of the sedimentary system in the East Frisian Wadden Sea to sea-level rise and wave-induced bed shear stress

The paper addresses the individual and collective contribution of different forcing factors (tides, wind waves, and sea-level rise) to the dynamics of sediment in coastal areas. The results are obtained from simulations with the General Estuarine Transport Model coupled with a sediment transport model. The wave-induced bed shear stress is formulated using a simple model based on the concept that the turbulent kinetic energy (TKE) associated with wind waves is a function of orbital velocity, the latter depending on the wave height and water depth. A theory is presented explaining the controls of sediment dynamics by the TKE produced by tides and wind waves. Several scenarios were developed aiming at revealing possible trends resulting from realistic (observed or expected) changes in sea level and wave magnitude. The simulations demonstrate that these changes not only influence the concentration of sediment, which is very sensitive to the magnitude of the external forcing, but also the temporal variability patterns. The joint effect of tides and wave-induced bed shear stress revealed by the comparison between theoretical results and simulations is well pronounced. The intercomparison between different scenarios demonstrates that the spatial patterns of erosion and deposition are very sensitive to the magnitude of wind waves and sea-level rise. Under a changing climate, forcing the horizontal distribution of sediments adjusts mainly through a change in the balance of export and import of sediment from the intertidal basins. The strongest signal associated with this adjustment is simulated North of the barrier islands where the evolution of sedimentation gives an integrated picture of the processes in tidal basins.     

内蒙古中西部地区不同土壤类型下土壤水分的研究

以2002—2003年连续两年自行观测的内蒙古中西部地区二连浩特、乌拉特中旗和乌海的土壤水分为基础，重点分析了沙尘暴发生季节反映下垫面特征的土壤水分的时间变化以及大气影响对不同土壤类型(棕钙土，灰漠土，栗钙土)水分的作用。土壤水分的变化被分为3个阶段进行分析，分别是解冻期至沙尘暴开始的春季、雨期的秋季和冰雪覆盖的冬季。土壤水分受气象条件和土壤类型的影响较大。在气象条件的影响下，土壤水分含量在土壤融化期最低，在雨季达到最大值，其中以栗钙土受的影响最明显。沙尘暴发生依赖于土壤融化时间、土壤融化期的土壤条件和上年冬季的冻土深度。     

Nocturnal Low-Level Jet Characteristics Over Kansas During Cases-99

Characteristics and evolution of the low-level jet (LLJ)over southeastern Kansas were investigated during the 1999 Cooperative Surface-AtmosphereExchange Study (CASES–99) field campaign with an instrument complement consisting of ahigh-resolution Doppler lidar (HRDL), a 60 m instrumented tower, and a triangle of Dopplermini-sodar/profiler combinations. Using this collection of instrumentation we determined thespeed U_X, height Z_X and direction D_X of the LLJ. We investigate here the frequencyof occurrence, the spatial distribution, and the evolution through the night, of these LLJcharacteristics. The jet of interest in this study was that which generates the shear and turbulencebelow the jet and near the surface. This was represented by the lowest wind maximum.We found that this wind maximum, which was most often between 7 and 10 m s¹,was often at or just below 100 m above ground level as measured by HRDL at the CASEScentral site. Over the 60 km profiler–sodararray, the topography varied by 100 m. The wind speed anddirection were relatively constant over this distance (with some tendency for strongerwinds at the highest site), but Z_X was more variable. Z_X was occasionally about equal at allthree sites, indicating that the jet was following the terrain, but more often it seemed to berelatively level, i.e., at about the same height above sea level. Z_X was also more variable thanU_X in the behaviour of the LLJ with time through the night, and on some nights $U_X wasremarkably steady. Examples of two nights with strong turbulence below jet level were furtherinvestigated using the 60 m tower at the main CASES–99 site. Evidence of TKE increasing withheight and downward turbulent transport of TKE indicates that turbulence was primarilygenerated aloft and mixed downward, supporting the upside–down boundary layer notion in thestable boundary layer.     

An Improvement of the Louis Scheme for the Surface Layer in an Atmospheric Modelling System

The Louis scheme for calculating the vertical eddy fluxes within the atmospheric surface layer is improved by broadening the original assumptions. In our approach, the momentum and heat transfer roughness lengths (z₀ and z_T respectively) can be different, and z₀ need not be negligibly small compared with the lowest height (z) in modelling. For these conditions, we choose more consistent wind and potential temperature profile forms, then derive new algorithms for calculating fluxes. Improvement is demonstrated for a wide range of z/L (L is the Obukhov length), z/z₀ and z₀ z_T, by comparing these fluxes with those derived from a theoretical surface-layer model. The improved algorithms can be used in atmospheric modelling systems for more varied surfaces and a wide range of atmospheric stability.