Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

青藏高原近地面层微气象学特征

利用1998年5月-7月在改则、当雄和昌都三测站获得的近地面层气象要素变化的观测资料，分析了青藏高原近地面层风速、温度和湿度日变化特征及廓线规律，发现高原近地面层微气象学特征具有自己的特点；同时还讨论了高原近地面层白天出现的逆湿现象。     

基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。     

Behaviour of a rupture of the 21 June 2000 earthquake in South Iceland as revealed in an asphalted car park

A major earthquake (M=6.6) occurred on 21 June 2000, in South Iceland. This paper presents an unusual example of left-lateral strike-slip displacement recorded in a newly asphalted car park surface through a mechanically consistent pattern of open fissures and pressure ridges resulting from simple shear and rotation. Measurement of these features allows accurate reconstruction of the local deformation. The behaviour of the asphalt layer resembles that of analogue physical models, especially in terms of rotations induced by shear deformation. It is finally shown that through a wide range of scales some basic patterns associating rotation and opposite senses of strike-slip exist in the South Iceland Seismic Zone.     

Numerical Analysis of Space–Time Finite Element Formulations for Miscible Displacements

A finite element formulation is proposed to approximate a nonlinear system of partial differential equations, composed by an elliptic subsystem for the pressure–velocity and a transport equation (convection–diffusion) for the concentration, which models the incompressible miscible displacement of one fluid by another in a rigid porous media. The pressure is approximated by the classical Galerkin method and the velocity is calculated by a post-processing technique. Then, the concentration is obtained by a Galerkin/least-squares space–time (GLS/ST) finite element method. A numerical analysis is developed for the concentration approximation. Then, stability, convergence and numerical results are presented confirming the a priori error estimates.     

Horizontal and vertical components of earthquake ground motions at liquefiable sites

Field observations on ground motions from recent earthquakes imply that current knowledge is limited with regard to relating vertical and horizontal motions at liquefiable sites. This paper describes a study with the purpose of clarifying this emerging issue to some extent. A series of numerical analyses is carried out on a liquefiable soil deposit with a verified, fully coupled, nonlinear procedure. It is shown that the transformation of vertical motions in the deposit differs considerably from the transformation of horizontal motions. Both the amplitude and frequency content of the horizontal motions are strongly dependent on the shaking level or the associated nonlinear soil behavior. The transfer function for vertical motions is however likely to be independent of the intensity of input motions; no reduction in the amplitude occurs even in the case of strong shaking. The results are shown to be in consistence with the laboratory observations on shaking table tests and recent field observations that less nonlinearity exists for vertical motions. It is also shown that the possibility exists for using information on spectral ratios between the horizontal and vertical surface motions to quickly identify in situ soil behavior and liquefaction that are not readily covered by conventional field or laboratory experimentation procedures.     

Computational modeling of cyclic mobility and post-liquefaction site response

Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations.     

Spatial variation of seismic motion induced by propagation of body waves

Spatial variation of earthquake ground motion is an important phenomenon that cannot be ignored in the design and safety of strategic structures. Several models have been developed to describe this variation using statistical, mathematical or physical approaches. The latter approach is not specific to an event. A recent contribution, which uses such an approach and called complete stochastic deamplification approach (CSDA), was developed [1]. The aim of this paper is to analyze the spatial variation of earthquake motion induced by the propagation of body waves using the CSDA. Coherency functions are evaluated for the cases of SH–SV–P waves propagating through stratified soil. Results obtained show that the variation of the coherency function is not the same for vertical and horizontal components and that the motion is more coherent at depth than at the free surface. In fact, we found that the rate of decrease with frequency and distance is not the same if P–SV waves propagate through stratified soil.     

桥梁限位器抗震设计方法研究

本文建立了两跨简支梁桥和五跨多跨刚架桥两结构模型，针对限位器的种类、刚度、强度、安装位置，输入地震动等进行了大量工况下的数值模拟研究。研究表明限位器与柱（框架）的刚度比在0.5-2之间较优。将现有的限位器设计方法应用于两算例结构，对现有限位器设计方法进行了比较研究。