一种新型遥感影像快速匹配算法

An iterative algorithm to calculate mutual correlation using hierarchical key points and the search space mark principle is proposed. An effective algorithm is designed to improve the matching speed. By hierarchical key point algorithm and mutual correlation coefficients of the matching images, the important points can be iteratively calculated in the images hierarchically, and the correlation coefficient can be obtained with satisfactory precision. Massive spots in the parameter space which are impossible to match can be removed by the search space mark principle. Two approximate continuities in the correlation image matching process, the image gray level distribution continuity and the correlation coefficient value in the parameter space continuity, are considered in the method. The experiments show that the new algorithm can greatly enhance matching speed and achieve accurate matching results.     

直线立体匹配中遮挡问题的解

遮挡会引起不同视角图像中特征间"一配多"和"多配多"的复杂对应关系,是特征立体匹配面临的主要难题之一。本文提出一个遮挡存在条件下直线特征间对应关系的求解模型,在此基础上实现了一种能够完整建立各种对应关系的直线立体匹配算法。     

特征级高分辨率遥感图像快速自动配准

随着遥感图像分辨率的日益提高,遥感图像的尺寸和数据量也不断地增大,同时随着遥感应用的发展,对图像配准的性能也提出越来越高的要求,基于此,提出一种特征级高分辨率遥感图像快速自动配准方法。首先,对图像进行Haar小波变换,基于小波变换后的近似图像进行配准以提高配准速度;其次,根据不同的遥感图像来源使用不同的特征提取方法(光学图像使用Canny边缘提取算子,SAR图像使用Ratio Of Averages算子),并将线特征转化为点特征;然后,依据特征点间最小角与次小角的角度之比小于某一阈值来确定初始匹配点对;最后,利用改进的随机抽样一致性算法滤除错误匹配点对,并结合分块思想均匀选取匹配点对计算仿射变换参数,进一步提高配准精度。为了验证本文方法的有效性,选择高分辨率World View-2图像、Pleiades图像和Terra SAR图像进行了实验,并与典型的SIFT算法、SURF算法进行比较分析,采用匹配率、匹配效率、均方根误差和时间消耗4个定量评价指标来客观评价算法的配准性能。实验结果表明,本文方法具有较好的有效性,且在不同的情况下具有较高的配准精度。本文提出的特征级高分辨率遥感图像快速自动配准方法,多组高分辨率遥感图像数据的配准实验结果表明该方法能快速实现并具有较高的配准精度和较好的鲁棒性。     

短潮位序列系统误差的探测及修复方法研究

提出了一种基于最小二乘潮位序列分段匹配方法。通过系统误差类型分析、分段段长确定、沉降发生具体时刻确定、系统误差类型探测和修复等算法研究,实现了临时潮位站潮位资料不同系统误差的准确探测和高精度修复。     

基于线要素动态化简的匹配算法比较与评价

矢量线要素数据来源多样,细节层次不一,限制了已有匹配算法正确率的提高,同时也给算法评价带来困难。化简可以减少线要素细节层次,提取其主要形态,据此提出一种基于线要素动态化简的匹配算法评价新方法。对不同匹配算法采用相同数据,在相同化简算法支撑下进行匹配,从而实现对不同匹配算法的评价。首先,阐述动态化简方法提取线要素主要形态的过程;其次,利用动态化简分别辅助4种已有匹配算法,获取每个匹配算法的最优匹配正确率;最后,将4种匹配算法的原始匹配结果与加入动态化简后的匹配结果进行对比,分析化简对匹配结果的影响,并把该影响运用到匹配算法的比较和评价中来。其中,1通过匹配正确率变化、误匹配等分析了匹配算法的数据适用性;2通过化简比例系数K变化时新增匹配数量的统计,评价了匹配算法对线要素局部细节的敏感程度并提出该指标的量化方法;3结合匹配算法采用的匹配相似度指标对其作出评价。     

基于频率匹配法和最优TS评分法的降水预报订正效果对比

利用2020年1月1日—2023年1月2日ECMWF、NCEP模式降水预报资料和眉山地区降水观测资料,采用频率匹配法（Frequency Matching Method,FM）、最优TS评分法（Optimal Threat Score,OTS）对ECMWF和NCEP的模式降水预报进行订正,对比检验评分和预报个例,并验证两种方法的适用性。结果表明：FM、OTS订正明显改善了小雨空报和暴雨漏报,提高了晴雨预报准确率、小雨ETS评分、暴雨TS评分,且OTS优于FM;FM可能出现参考数据与实况数据有较大偏差的情况,从而影响订正效果,OTS则不受参考数据的影响;数值模式降水的预报偏度明显大于1或小于1时,FM、OTS订正效果越好;FM、OTS难以订正小雨漏报、暴雨空报,也难以对降水差值较大的空漏报或降水落区偏差进行订正。     

Automatic change detection in lane-level road networks using GPS trajectories

Lane-level road network updating is crucial for urban traffic applications that use geographic information systems contributing to, for example, intelligent driving, route planning and traffic control. Researchers have developed various algorithms to update road networks using sensor data, such as high-definition images or GPS data; however, approaches that involve change detection for road networks at lane level using GPS data are less common. This paper presents a novel method for automatic change detection of lane-level road networks based on GPS trajectories of vehicles. The proposed method includes two steps: map matching at lane level and lane-level change recognition. To integrate the most up-to-date GPS data with a lane-level road network, this research uses a fuzzy logic road network matching method. The proposed map-matching method starts with a confirmation of candidate lane-level road segments that use error ellipses derived from the GPS data, and then computes the membership degree between GPS data and candidate lane-level segments. The GPS trajectory data is classified into successful or unsuccessful matches using a set of defuzzification rules. Any topological and geometrical changes to road networks are detected by analysing the two kinds of matching results and comparing their relationships with the original road network. Change detection results for road networks in Wuhan, China using collected GPS trajectories show that these methods can be successfully applied to detect lane-level road changes including added lanes, closed lanes and lane-changing and turning rules, while achieving a robust detection precision of above 80%.     

一种由粗到精的光学与SAR遥感图像配准算法

由于光学遥感图像和SAR图像具有明显的非线性强度差异,且SAR图像存在斑点噪声,使得其配准存在较大难度。为此,本文结合基于特征和基于区域图像配准方法的优点,并组合为混合模型,提出一种由粗到精的自动配准算法。以光学遥感图像和SAR图像分别为参考图像和待配准图像,先以基于特征点的SAR-SIFT完成粗配准,再以基于区域的ROEWA-HOG完成精配准。① 采用SAR-SIFT算法进行特征点检测和特征匹配来计算图像的仿射变换模型,以消除参考图像和待配准图像之间明显的旋转、尺度和平移差异,至此完成图像粗配准;② 在此基础上利用分块Harris角点检测在参考图像上获得特征点,并根据特征点确定待配准图像上的同名点搜索区域;③ 计算图像的ROEWA梯度,构造以特征点为中心的模板区域内的HOG特征向量,以SSD作为相似性测度搜索待配准图像上的同名点,完成高精度的图像配准;④ 进行图像配准实验,对配准结果进行目视检查和精度评估。经过多组光学与SAR图像配准实验,验证本文算法能够结合基于特征和基于区域的图像配准方法的优点,较好地抵抗光学与SAR图像之间的非线性强度、旋转、尺度、平移差异和SAR图像的噪声影响,并逐步提高配准精度,最终配准精度达到1个像素左右,实现了光学与SAR图像的高精度自动配准,能够满足光学与SAR图像后续综合应用。     

Application of the EnKF and Localization to Automatic History Matching of Facies Distribution and Production Data

The performance of the ensemble Kalman filter (EnKF) for continuous updating of facies location and boundaries in a reservoir model based on production and facies data for a 3D synthetic problem is presented. The occurrence of the different facies types is treated as a random process and the initial distribution was obtained by truncating a bi-Gaussian random field. Because facies data are highly non-Gaussian, re-parameterization was necessary in order to use the EnKF algorithm for data assimilation; two Gaussian random fields are updated in lieu of the static facies parameters. The problem of history matching applied to facies is difficult due to (1) constraints to facies observations at wells are occasionally violated when productions data are assimilated; (2) excessive reduction of variance seems to be a bigger problem with facies than with Gaussian random permeability and porosity fields; and (3) the relationship between facies variables and data is so highly non-linear that the final facies field does not always honor early production data well. Consequently three issues are investigated in this work. Is it possible to iteratively enforce facies constraints when updates due to production data have caused them to be violated? Can localization of adjustments be used for facies to prevent collapse of the variance during the data-assimilation period? Is a forecast from the final state better than a forecast from time zero using the final parameter fields?To investigate these issues, a 3D reservoir simulation model is coupled with the EnKF technique for data assimilation. One approach to enforcing the facies constraint is continuous iteration on all available data, which may lead to inconsistent model states, incorrect weighting of the production data and incorrect adjustment of the state vector. A sequential EnKF where the dynamic and static data are assimilated sequentially is presented and this approach seems to have solved the highlighted problems above. When the ensemble size is small compared to the number of independent data, the localized adjustment of the state vector is a very important technique that may be used to mitigate loss of rank in the ensemble. Implementing a distance-based localization of the facies adjustment appears to mitigate the problem of variance deficiency in the ensembles by ensuring that sufficient variability in the ensemble is maintained throughout the data assimilation period. Finally, when data are assimilated without localization, the prediction results appear to be independent of the starting point. When localization is applied, it is better to predict from the start using the final parameter field rather than continue from the final state.     

基于空间相似性的面实体匹配算法研究

同一地物在不同来源的地图上通常存在着差异,其识别或匹配对于不同数据源的地图编制来说很关键。面状地物要素在很多地图表示中都占有很大的比例。基于人眼综合已有信息来识别同名实体的思想,本文提出了基于空间相似性的面实体匹配算法。该算法将面实体作为一个整体看待,采用加权平均法来综合面实体的位置、形状、大小等特征的相似度,进而根据获得的总相似度大小确定匹配实体。算法在确定位置相似度时选择形状中心点对面实体进行惟一标识;采用形状描述函数来计算形状相似度,不容易受各种干扰而影响精度,避免了形状信息的丢失;面实体的大小通过其覆盖面积来度量。实验结果表明该方法具有良好的稳定性和可靠性。