Modeling an atypical petroleum system: A case study of hydrocarbon generation,migration and accumulation related to igneous intrusions in the Neuquen Basin,Argentina

In the Altiplanicie del Payún area (Neuquen Basin, Argentina), immature source rock sections intruded by up to 600 m thick Tertiary laccoliths show full spectrum maturity aureoles over hundreds of meters from the contacts. Commercial oil accumulations (20–33°API) and oil shows are located along the entire column, both in sandstone/carbonate and fractured igneous reservoirs. A challenging numerical model that included the emplacement of the intrusive bodies, with extreme temperature ranges and unusually short calculation time steps, has been done with the aim to better understand hydrocarbon generation and migration processes related to these thermal anomalies.     

Molecular and isotopic compositions of bitumens in Silurian tar sands from the Tarim Basin,NW China: Characterizing biodegradation and hydrocarbon charging in an old composite basin

Biodegradation and oil mixing in Silurian sandstone reservoirs of the Tarim Basin, one of the largest composite basins in China, were investigated by analyzing the molecular characteristics and stable carbon isotopic signatures of low-molecular-weight (LMW) saturated hydrocarbons and high-molecular-weight (HMW) asphaltenes. Detection of 25-norhopanes and 17-nortricyclic terpanes in most Silurian tar sands from the Tabei Uplift in the Tarim Basin suggests a much greater degree of biodegradation here than in the Tazhong Uplift. This explains the relatively more abundant tricyclic terpanes, gammacerane, pregnane and diasteranes in tar sands from the Tabei Uplift than in those from the Tazhong Uplift. Hence, care must be taken when assigning oil source correlations using biomarkers in tar sands because of the biodegradation and mixing of oils derived from multiple sources in such an old composite basin. Asphaltenes in the tar sands seem to be part of the oil charge before biodegradation, depending on the relative anti-biodegradation characteristics of asphaltenes, the similarity in carbon isotopic signatures for asphaltenes and their pyrolysates, and the consistent product distribution for flash pyrolysis and for regular steranes in asphaltene pyrolysates, regardless of whether the tar sands were charged with fresh oil. According to the relative distributions of regular steranes and the relatively abundant 1,2,3,4-tetramethylbenzene significantly enriched in ¹³C, the oil sources for asphaltenes in the tar sands might be related to lower Paleozoic marine source rocks formed in euxinic conditions. Nevertheless, the relatively low abundance of gammacerane and C₂₈ regular steranes observed in asphaltene pyrolysates and residual hydrocarbons, within limited samples investigated in this work, made a direct correlation of oils originally charged into Silurian tar sands with those Cambrian source rocks, reported so far, seem not to be possible. Comparison of carbon isotopic signatures of n-alkanes in asphaltene pyrolysates with those of LMW saturated hydrocarbons is helpful in determining if the abundant n-alkanes in tar sands are derived from fresh oil charges after biodegradation. The limited carbon isotopic data for n-alkanes in LMW saturated hydrocarbons from the tar sands can be used to classify oils charged after biodegradation in the composite basin into four distinct groups.     

An integrated approach to assess the ecological and chemical status of lakes with HOD/AHOD: a case study of two lakes

The thermal strati?cation of the lakes impedes the transfer of atmospheric oxygen into the lower layers of the lake. In lakes which are af fected by diverse anthropogenic in?uences, the increasing organic matter amounts lead to a sharp decrease in hypolimnetic oxygen amounts, aided by thermal strati?cation,and anaerobic conditions arise. The determination of hypolimnetic oxygen demand(HOD) and areal hypolimnetic oxygen demand(AHOD) and their monitoring represent an integrated approach to investigate the oxygenation of lakes, the nutrient conditions, and the physicochemical dynamics. In this study, two lakes dif fering by size and af fected by dif ferent anthropogenic sources, are investigated in this respect. At?rst, bathymetric studies were conducted to determine the depth, surface area, and volume relationships.Then, based on monitoring studies conducted in 2013 and 2014, the thermal strati?cation dynamics and layer properties were established using the relative thermal resistance to mixing(RTRM) index based on temperature and density pro?les. Following this, the oxygen depletion rates were determined by oxygen and temperature pro?ling in the hypolimnion. For the years of 2013 and 2014, the AHOD values for the Borabey Pond which is far from anthropogenic in?uences, were found to be 0.848 and 0.569 g O 2/(m·d), respectively.The AHOD values for the Porsuk Reservoir which was overburdened for years by industrial and domestic pollution were found to be 4.263 and 5.099 g O 2/(m·d), larger than its counterpart by almost sevenfold. The HOD and AHOD monitoring can be considered to a valuable tool for assessing the ecological and chemical status of lakes within Annex 5 of the Water Framework Directive and as an integrated approach to assess and monitor the status of lakes.     

近海海洋石油平台导管架喷涂金属层防腐

锌、铝及其合金涂层对钢铁的防护，不仅对阴极起保护作用(Gartland，1987)， 对涂层本身也具有良好的抗腐蚀性能。此外，涂层中金属微粒表面形成的致密氧化膜，也起到了防腐蚀的作用。在不同大气环境下，锌、铝有良好的耐蚀性，其腐蚀速率比钢铁要低得多(李言涛，1998)。采用热喷涂锌、铝及其合金涂层对钢铁构件和构筑物进行长效防护早在20世纪20年代就已开始应用，至今仍是普遍采用的防护措施，并在继续发展(李守本等，1989)。20年代初，法国首先用于海水闸门的防腐；40年代美国用于墨西哥湾的海上井架和海上输油管以及舰船的防腐；60年代英、法、德等国海军将这一技术扩大应用到舰船的上部结构和船壳。而金属热喷涂技术在海洋工程中使用非常有限，第一次使用热喷铝涂层防护近海平台的实例是Conoco公司在北海的Murchison结构上的锥形塔，并且已获得了4a良好的使用效能(Fisher et al.，1987；Shaw et al.，1985)。1984年6月，Hutton张力支柱平台(TLP)在北海下水(水深148 m)安装。系链、升降机和锥形塔均采用火焰热喷涂技术喷涂铝涂层进行防护(Tyson，1985)。1992年6月，Hotton平台使用8a后，对升降机绳索进行观察，在飞溅区没有发现腐蚀现象，也没有检测到褐色渗漏效应(Fisher et al.，1995)。     

Kilometer-scale fault-related thermal anomalies in tight gas sandstones

Upper Carboniferous sandstones make one of the most important tight gas reservoirs in Central Europe. This study integrates a variety of geothermometers (chlorite thermometry, fluid inclusion microthermometry and vitrinite reflection measurements) to characterize a thermal anomaly in a reservoir outcrop analog (Piesberg quarry, Lower Saxony Basin), which is assumed responsible for high temperatures of circa 300 °C, deteriorating reservoir quality entirely. The tight gas siliciclastics were overprinted with temperatures approximately 90–120 °C higher compared to outcropping rocks of a similar stratigraphic position some 15 km to the west. The local temperature increase can be explained by circulating hydrothermal fluids along the fault damage zone of a large NNW-SSE striking fault with a displacement of up to 600 m in the east of the quarry, laterally heating up the entire exposed tight gas sandstones. The km-scale lateral extent of this fault-bound thermal anomaly is evidenced by vitrinite reflectance measurements of meta-anthracite coals (VR_rot ∼ 4.66) and the temperature-related diagenetic overprint. Data suggest that this thermal event and the associated highest coalification was reached prior to peak subsidence during Late Jurassic rifting (162 Ma) based on K-Ar dating of the <2 μm fraction of the tight gas sandstones. Associated stable isotope data from fluid inclusions, hosted in a first fracture filling quartz generation (T ∼ 250 °C) close to lithostatic fluid pressure (P ∼ 1000 bars), together with authigenic chlorite growth in mineralized extension fractures, demonstrate that coalification was not subject to significant changes during ongoing burial. This is further evidenced by the biaxial reflectance anisotropy of meta-anthracite coals. A second event of quartz vein formation occurred at lower temperatures (T ∼ 180 °C) and lower (hydrostatic) pressure conditions (P ∼ 400 bars) and can be related to basin inversion. This second quartz generation might be associated with a second event of illite growth and K-Ar ages of 96.5–106.7 Ma derived from the <0.2 μm fraction of the tight gas sandstones.This study demonstrates the exploration risk of fault-bound thermal anomalies by deteriorating entirely the reservoir quality of tight gas sandstones with respect to porosity and permeability due to the cementation with temperature-related authigenic cements. It documents that peak temperatures are not necessarily associated with peak subsidence. Consequently, these phenomena need to be considered in petroleum system models to avoid, for example, overestimates of burial depth and reservoir quality.     

Chemosynthetic trophic support for the benthic community at an intertidal cold seep site at Mocha Island off central Chile

We analyzed C and N stable isotope ratios of benthic fauna and their potential food sources at an intertidal methane seep site and a control site without emanation at Mocha Island (central Chile). The objective was to trace the origin of the main food sources used by the local heterotrophic fauna, based on the hypothesis that chemosynthetic production could be partially fueling the local food web at the seep site. Food sources sampled at both sites included macroalgae, particulate organic matter and bacteria-like filaments found growing over the red algae Gelidium lingulatum within the areas of active methane release.     

Cement Deep Soil Mixing (CDSM) for Solidification of Soft Estuarine Sediments

A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping.     

The impact of shrimp trawling and associated sediment resuspension in mud dominated, shallow estuaries

To address the relative importance of shrimp trawling on seabed resuspension and bottom characteristics in shallow estuaries, a series of disturbance and monitoring experiments were conducted at a bay bottom mud site (2.5 m depth) in Galveston Bay, Texas in July 1998 and May 1999. Based on pre- and post-trawl sediment profiles of ⁷Be; pore water dissolved oxygen and sulfide concentration; and bulk sediment properties, it was estimated that the trawl rig, including the net, trawl doors, and “tickler chain,” excavate the seabed to a maximum depth of approximately 1.5 cm, with most areas displaying considerably less disturbance. Water column profile data in the turbid plume left by the trawl in these underconsolidated muds (85–90% porosity; <0.25 kPa undrained shear strength) demonstrate that suspended sediment inventories of up to 85–90 mg/cm² are produced immediately behind the trawl net; an order of magnitude higher than pre-trawl inventories and comparable to those observed during a 9–10 m/s wind event at the study site. Plume settling and dispersion caused suspended sediment inventories to return to pre-trawl values about 14 min after trawl passage in two separate experiments, indicating particles re-settle primarily as flocs before they can be widely dispersed by local currents. As a result of the passage of the trawl rig across the seabed, shear strength of the sediment surface showed no significant increase, suggesting that bed armoring is not taking place and the trawled areas will not show an increase in critical shear stress.     

Digital quantification of the miospore coloration to assess the thermal maturity: Novel RGB-based measuring technique

The post depositional thermal maturity and its related chemical changes induce the sporomorphs color alteration, which is a common useful tool in the optical microscopy of the organic matters (OM) and their pre-geochemical studies. The present contribution uses the modern available opportunity of digital technology to achieve a quantifying system technique, which includes color measurements and their possible graphic presentation. The normal digital images of sporomorphs from several ages and geological settings are used to obtain color measurements in the form of digital Red, Green and Blue triple color system (RGB). These measurements were accomplished using some software programs such as Photoshop™^© or ImageJ with employing average microscope setup. The triple RGB color readings are plotted on a ternary diagram, which is divided into three fields. These fields express the maturity levels. The presented new RGB-based quantifying technique is economic and provides a simple examination for maturity, which is linked to the hydrocarbon generation. This can partially replace or walk side by side with the vitrinite reflectance microscopy.