STUDY ON THE CAUSE OF HEAVY RAIN 200506 （HR200506） IN GUANGDONG

A continuous heavy rain visited Guangdong province during June 18-25, 2005 (named Heavy Rain 200506, HR200506) and had resulted in enormous economic loss. The ageostropic Q vectors, θse,meridional circulation, computed from the NCEP reanalysis, and TBB are used to study the rainfall processes. The results indicated that a convective system moved northwards from the South China Sea (SCS)and stayed in Guangdong for several days, which was a direct cause of HR200506. The process is a result of the activity of the South China Sea summer monsoon. There were two rainbands of HR200506 in Guangdong. One laid in the north of Guangdong that produced frontal rainfall; another situated on the south of Guangdong which produced monsoon rainfall.     

一次辽宁秋季暴雨天气的诊断分析

使用1.0°×1.0°NCEP再分析资料,对2006年10月21—22日深秋暴雨在天气形势分析的基础上,进行物理量诊断。结果表明:在有利的环境背景形势下,高位涡从对流层高层向低层伸展并形成湿位涡柱,引起气旋性环流与低涡环流叠加。对流层低层的湿斜压性增强,引起低层的锋区加强及垂直涡度发展,高空入侵干冷空气锲入底层,低层暖湿空气强迫抬升,使地面发展为气旋;高低空急流耦合产生上升气流,同时较强的补偿下沉运动激发上升运动加强,使次级环流加强,触发不稳定能量的释放;低空急流和超低空急流向辽宁输送暖湿空气及能量,对流层中低层形成湿柱并积聚高不稳定能量;中尺度气旋、高低空急流、湿位涡柱、次级环流上升支、地面高水汽含量湿区、高假相当位温出现的时间、强度、位置和结构决定了暴雨的时间和落区。     

基于支持向量机的遥感大雾判识

提出了一种基于支持向量机的卫星遥感数据大雾判识方法:首先通过对风云1D卫星大雾区域的各通道辐射值出现频次进行概率统计,利用其阈值来粗判识大雾;然后在粗判识的基础上通过支持向量机的方法进行大雾细判识;最后利用腐蚀和膨胀的图像处理技术对判识后的图像进行优化处理。在对我国2006年9-12月的65条监测到大雾的风云1D轨道的探测数据进行分析之后,发现大雾判识结果与专家标记吻合。检验结果表明,利用1、2、4、6、7、10通道组合进行粗判识的结果最好,5交叉正确率为89.9849%,TS评分为74.04%。利用上述方法对个例的分析检验表明,基于支持向量机的遥感大雾判识方法是切实可行的。     

土地管理信息系统建立过程中地图数据质量问题讨论

地图数据对于土地管理信息系统来说至关重要,地图数据质量的好坏直接影响到信息系统的质量和应用效果乃至信息系统建设的成败。该文对土地管理信息系统建立过程中有关地图数据质量问题进行分析探讨并提出了提高地图数据质量的方法。     

高精度矢量数据的路面三维自动建模方法

为了解决路面手工三维建模速度慢、工作量大等问题,本文面向规范化处理的高精度矢量数据,对不同路口进行精细化设计,自动生成路面三维模型.首先使用道路高精度三维信息采集软件,在获取的点云数据中半自动化提取准确的道路边线、道路标识线等矢量信息;然后针对不同路口进行精细化线形设计,提出连续四边形重建方法、弯道平滑处理方法、交叉口...     

任意各向异性介质相(群)速度的计算

反映弹性波在各向异性介质中传播特性的两个基础的物理量是相速度和群速度.本文在总结前人工作的基础上,提出任意各向异性介质相(群)速度的计算方案:首先推导各自计算公式,其次考虑剪切波奇点的特殊性,再次令其遵循相应约束条件,最后,采用三个计算实例检验该方案的正确性和有效性.通过对计算结果的分析以及各向异性理论预测可以加深对各向异性特有性质(如剪切波奇点、群速度多值性)的理解,有助于增强我们对任意各向异性理论的基本认识.     

基于不同核函数的2010年玉树地震滑坡空间预测模型研究

基于统计学习理论与地理信息系统(GIS)技术的地震滑坡灾害空间预测是一个重要的研究方向,其可以对相似地震条件下地震滑坡的发生区域进行预测.2010年4月14日07时49分(北京时间),青海省玉树县发生了Mw6.9级大地震,作者基于高分辨率遥感影像解译与现场调查验证的方法,圈定了2036处本次地震诱发滑坡,这些滑坡大概分布在一个面积为1455.3 km2的矩形区域内.本文以该矩形区域为研究区,以GIS与支持向量机(SVM)模型为基础,开展基于不同核函数的地震滑坡空间预测模型研究.应用GIS技术建立玉树地震滑坡灾害及相关滑坡影响因子空间数据库,选择高程、坡度、坡向、斜坡曲率、坡位、水系、地层岩性、断裂、公路、归一化植被指数(NDVI)、同震地表破裂、地震动峰值加速度(PGA)共12个因子作为地震滑坡预测因子.以SVM模型为基础,基于线性核函数、多项式核函数、径向基核函数、S形核函数等4类核函数开展地震滑坡空间预测研究,分别建立了玉树地震滑坡危险性指数图、危险性分级图、预测结果图.4类核函数对应的模型正确率分别为79.87%,83.45%,84.16%,64.62%.基于不同的训练样本开展模型训练与讨论工作,表明径向基核函数是最适用于该地区的地震滑坡空间预测模型.本文为地震滑坡空间预测模型中核函数的科学选择提供了依据,也为地震区的滑坡防灾减灾工作提供了参考.     

将微粒群和支持向量机用于耕地驱动因子选择的研究

结合微粒群算法(PSO)具有执行速度快、受问题维数变化影响小的优点及支持向量机算法(SVM)结构风险最小化原理,构建了基于离散二进制微粒群(BPSO)与支持向量机的耕地驱动力因子选择方法,使用特征子集中确定的特征来训练支持向量回归机,用适应度函数来评价回归机的性能,指导BPSO的搜索。实验表明,该方法能有效地提取出耕地驱动因子的特征子集,从而降低了指标的维数,保留了关键信息,以获得知识的最小表达。     

Statistical identification of orographic effects in the regional analysis of extreme rainfall

Regional models of extreme rainfall must address the spatial variability induced by orographic obstacles. However, the proper detection of orographic effects often depends on the availability of a well‐designed rain gauge network. The aim of this study is to investigate a new method for identifying and characterizing the effects of orography on the spatial structure of extreme rainfall at the regional scale, including where rainfall data are lacking or fail to describe rainfall features thoroughly. We analyse the annual maxima of daily rainfall data in the Campania region, an orographically complex region in Southern Italy, and introduce a statistical procedure to identify spatial outliers in a low order statistic (namely the mean). The locations of these outliers are then compared with a pattern of orographic objects that has been a priori identified through the application of an automatic geomorphological procedure. The results show a direct and clear link between a particular set of orographic objects and a local increase in the spatial variability of extreme rainfall. This analysis allowed us to objectively identify areas where orography produces enhanced variability in extreme rainfall. It has direct implications for rain gauge network design criteria and has led to promising developments in the regional analysis of extreme rainfall. Copyright © 2015 John Wiley & Sons, Ltd.     

Fracture mechanics analysis of multiple cracks in anisotropic media

This paper presents a single‐domain boundary element method (BEM) for linear elastic fracture mechanics analysis in the two‐dimensional anisotropic material. In this formulation, the displacement integral equation is collocated on the un‐cracked boundary only, and the traction integral equation is collocated on one side of the crack surface only. A special crack‐tip element was introduced to capture exactly the crack‐tip behavior. A computer program with the FORTRAN language has been developed to effectively calculate the stress intensity factors of an anisotropic material. This BEM program has been verified having a good accuracy with the previous researches. Furthermore, by analyzing the different anisotropic degree cracks in a finite plate, we found that the stress intensity factors of crack tips had apparent influence by the geometry forms of cracks and media with different anisotropic degrees. Copyright © 2010 John Wiley & Sons, Ltd.