深水资料浮标中温度传感器电路的设计

本文对深水资料浮标中温度传感器的电路原理作了介绍。传感器中的感温元件,采用两端单片集成温度传感器AD590;整个测温电路仅用一片高精度4×1/2位A/D转换器7135;为了能方便地检验和标定温度值,在电路上还设计了温度显示部分,并设计了闭显的功能,以达到省电的目的。     

华南沿海地区全新世海平面变化特征

１海平面变化特征１．１全新世中期海侵根据地层中所含硅藻属种雷州半岛海康南田乡一１５ｍ钻孔岩芯，含有丰富的硅藻，主要属种是①：具槽直链藻（Ｍｅｌｏｓｉｒａ　ｓｕｌｃａｔａ（Ｅｈｒ）Ｋｕｔｚ）、范氏回箱藻（Ｐｙｘｉｃｌｉｃｕｌａ　ｗｅｙｐｒｅｃｈｔｉｉＧｒｕｎ）、条纹小环藻（Ｃｙｃｌｏｔｅｌｌａｓｔｒｉａｔａ（Ｋｕｔｚ）Ｇｒｕｎ）、流水双菱藻（ＳｕｒｉｒｅｌｌａｆｌｕｍｉｎｅｎｓｉｓＧｒｕｎ）。上述硅藻主要是海相生活属种，今日南田乡已距离海岸线５ｋｍ。徐闻海安西侧一１８．５ｍ钻孔岩芯中的硅藻除上述属…     

东海沿岸海区垂直环流及其温盐结构动力过程研究Ⅱ．温盐结构

对于本研究采用的动力学模型及其垂直环流的模拟结果已在第Ⅰ部分论述。作者将对与垂直环流对应的温、盐结构进行分析。温度和盐度模拟结果表明：冬季东海沿岸海区的温、盐分布均为近岸低、外海高;近岸温、盐呈垂直均匀分布,在外海出现分层,其温度为表层高、底层低,而盐度却为表层和底层高,中层偏低,长江口以南的近表层以下形成自近岸伸向外海的弱低盐水舌;长江冲淡水区及长江口以北和其以南外海的近表层有温、盐跃层生成,深底层温、盐呈均匀分布,且保持低温高盐特征;随着海区自北往南纬度的降低,岸坡和水深的增大及沿岸下降流的增强,温度和盐度自近岸至外海的垂直均匀分布跨度逐渐变窄;外海近表层的温、盐跃层强度自北至长江口逐渐增强,而自长江口至南逐渐减弱,其位置自北往南逐渐上移;冬季沿岸下降流使长江冲淡水区的盐跃层变厚。夏季海区的温度分布为近岸和外海高,近岸稍远出现冷水涌升,垂向上呈现显著分层,盐度分布为近岸低、外海高;长江冲淡水区及杭州湾以南外海的次表层存在温、盐跃层,其跃层以上出现混合层,且保持高温低盐特征,跃层以下温、盐大致呈均匀分布,并保持低温高盐特征;随着海区自南往北纬度的增高、岸坡和水深的减小及沿岸上升流自南至长江口和自长江口至北的增强和继而减弱,长江冲淡水区的温、盐跃层强度自南至长江口逐渐增强,而自长江口至北逐渐减弱,外海次表层的温、盐跃层强度却自南至长江口逐渐减弱,自长江口至北又逐渐增强,其温、盐跃层的位置自南往北逐渐上移;夏季沿岸上升流使长江冲淡水区的盐跃层变薄。     

西藏崩错8级地震地表破裂的变形特征及其破裂机制

1951年11月18日,西藏那曲崩错附近发生了一次8级地震,地表产生了长达约91公里的破裂带。本文总结了该破裂的几何、位移分布特征,讨论了破裂的形成机制和崩错地震的发震构造条件     

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Surface renewal analysis for sensible and latent heat flux density

High frequency temperature measurements were recorded at five heights and surface renewal (SR) analysis was used to estimate sensible heat flux density (H) over 0.1 m tall grass. Traces of the temperature data showed ramp-like structures, and the mean amplitude and duration of these ramps were used to calculate H using structure functions. Data were compared with H values measured with a sonic anemometer. Latent heat flux density (E) was calculated using an energy balance and the results were compared with E computed from the sonic anemometer data. SR analysis provided good estimates of H for data recorded at all heights but the canopy top and at the highest measurement level, which was above the fully adjusted boundary layer.     

高原大地形及海洋热力强迫对东亚及北半球环流和气候变化影响的观测研究

本文总结了“青藏高原大地形及西太平洋暖池势力强迫对东亚及全球气候变化的影响”专题五年来的主要研究工作。其中包括青世故高原东部大气热源的时间演变特征,夏半年高原热源异常对我国降水和北半球环流的影响;西沙海温变化特征及其与我南方降水的关系,北太平洋海温主因子特征及其与华南前汛期降水的变化。     

井下记录的PP和SS震相

本文在系统分析静海台井下地震记录图的基础上,发现并解决了具有一定实际和理论意义的两个问题:其一是证明了最初误认为是干扰的“双脉冲”图形实际上均是微地震。从而指出研究静海周围地区的地震活动性应考虑微震活动问题。其二确认静海周围地区微震波形的4个主要震相是P、PP、S和SS,并对地面反射波PP和SS能够观测到的条件作了初步分析,其结果进一步说明井下地震记录较之地面记录更为“逼真”,复杂和丰富。     

A surface complexation model for cadmium and lead adsorption onto diatom surface

This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom–water interfaces for two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption measurements with surface complexation modeling. Reversible adsorption experiments were performed at 20 °C after 3 h of exposure as a function of pH, metal concentration in solution, and ionic strength. While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. These observations allowed us to construct a surface complexation model for cadmium and lead binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. Parameters of this model are in agreement with previous acid–base titration results and allow quantitative reproduction of all adsorption experiments.     

Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach

Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.

For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of I_d), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the I_d parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected I_d value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks.