Upper Oligocene-Lower Miocene shallowing-upwardlacustrine sequences controlled by periodic and non-periodic processes(Ebro Basin, northeastern Spain)

The lacustrine facies from two sections (Candasnos and Fraga) ofthe Oligocene-Miocene Torrente de Cinca lithostratigraphic Unit in thecentral part of the Ebro Basin (Spain) have been analysed to determine theinfluence of orbital parameters in lacustrine sedimentation. The unit ispredominantly composed of limestones and marls, and represents a shallowlacustrine freshwater system. The sedimentological features of the faciesstudied demonstrate that the lower part of the Candasnos section representsoffshore lacustrine subenvironments whereas the upper part, and the whole ofthe Fraga section, characterise marginal lacustrine areas. Series of stratalthickness variations of limestone, marl, and limestone/marl couplets fromboth sections have been analysed using spectral analysis. This shows thatinformation corresponding to periodic cycles only appears in the offshorefacies, that is to say, in the lower part of Candasnos section, and disappearsin the marginal facies where non-periodic cycles exist. Furthermore, thespectral analysis of the offshore facies highlights the existence of a peak inthe power spectrum with a period of around 7 (6.8 to 7.8) that can berecognised in the field as shallowing-upward lacustrine sequences.Magnetostratigraphic data from the Candasnos section allow us to establish atime span of 2,808 years for the limestone/marl couplet from the lower partof this section, and between 19,000 and 22,000 years for the periodic cycleidentified, thus representing the climatic precession cycle. Shallowingsequences from marginal areas do not correspond with any periodiccycle.     

用卫星高光谱数据提取德兴铜矿区植被污染信息

在深入分析研究德兴铜矿矿区植被光谱特征的基础上,利用美国EO-1卫星Hyperion高光谱数据,通过反演表征植物生理状态的光谱特征参数(红边位置和最大吸收深度)变异,提取与污染相关的信息,获取了矿山植被污染生态效应概况,为矿山污染的诊断和监测提供新技术和知识支撑。     

Estimate of heavy metals in soil and streams using combined geochemistry and field spectroscopy in Wan-sheng mining area,Chongqing, China

Heavy metals contaminated soils and water will become a major environmental issue in the mining areas. This paper intends to use field hyper-spectra to estimate the heavy metals in the soil and water in Wan-sheng mining area in Chongqing. With analyzing the spectra of soil and water, the spectral features deriving from the spectral of the soils and water can be found to build the models between these features and the contents of Al, Cu and Cr in the soil and water by using the Stepwise Multiple Linear Regression (SMLR). The spectral features of Al are: 480 nm, 500 nm, 565 nm, 610 nm, 680 nm, 750 nm, 1000 nm, 1430 nm, 1755 nm, 1887 nm, 1920 nm, 1950 nm, 2210 nm, 2260 nm; The spectral features of Cu are: 480 nm, 500 nm, 610 nm, 750 nm, 860 nm, 1300 nm, 1430 nm, 1920 nm, 2150 nm, 2260 nm; And the spectral features of Cr are: 480 nm, 500 nm, 610 nm, 715 nm, 750 nm, 860 nm, 1300 nm, 1430 nm, 1755 nm, 1920 nm, 1950 nm. With these features, the best models to estimate the heavy metals in the study area were built according to the maximal R². The R² of the models of estimating Al, Cu and Cr in the soil and water are 0.813, 0.638, 0.604 and 0.742, 0.584, 0.513 respectively. And the gradient maps of these three types of heavy metals’ concentrations can be created by using the Inverse distance weighted (IDW).The gradient maps indicate that the heavy metals in the soil have similar patterns, but in the North-west of the streams in the study area, the contents are of great differences. These results show that it is feasible to predict contaminated heavy metals in the soils and streams due to mining activities by using the rapid and cost-effective field spectroscopy.     

Quantifying uncertainty in remote sensing-based urban land-use mapping

Land-use/land-cover information constitutes an important component in the calibration of many urban growth models. Typically, the model building involves a process of historic calibration based on time series of land-use maps. Medium-resolution satellite imagery is an interesting source for obtaining data on land-use change, yet inferring information on the use of urbanised spaces from these images is a challenging task that is subject to different types of uncertainty. Quantifying and reducing the uncertainties in land-use mapping and land-use change model parameter assessment are therefore crucial to improve the reliability of urban growth models relying on these data. In this paper, a remote sensing-based land-use mapping approach is adopted, consisting of two stages: (i) estimating impervious surface cover at sub-pixel level through linear regression unmixing and (ii) inferring urban land use from urban form using metrics describing the spatial structure of the built-up area, together with address data. The focus lies on quantifying the uncertainty involved in this approach. Both stages of the land-use mapping process are subjected to Monte Carlo simulation to assess their relative contribution to and their combined impact on the uncertainty in the derived land-use maps. The robustness to uncertainty of the land-use mapping strategy is addressed by comparing the most likely land-use maps obtained from the simulation with the original land-use map, obtained without taking uncertainty into account. The approach was applied on the Brussels-Capital Region and the central part of the Flanders region (Belgium), covering the city of Antwerp, using a time series of SPOT data for 1996, 2005 and 2012. Although the most likely land-use map obtained from the simulation is very similar to the original land-use map – indicating absence of bias in the mapping process – it is shown that the errors related to the impervious surface sub-pixel fraction estimation have a strong impact on the land-use map's uncertainty. Hence, uncertainties observed in the derived land-use maps should be taken into account when using these maps as an input for modelling of urban growth.     

A GIHS-based spectral preservation fusion method for remote sensing images using edge restored spectral modulation

High spatial resolution and spectral fidelity are basic standards for evaluating an image fusion algorithm. Numerous fusion methods for remote sensing images have been developed. Some of these methods are based on the intensity–hue–saturation (IHS) transform and the generalized IHS (GIHS), which may cause serious spectral distortion. Spectral distortion in the GIHS is proven to result from changes in saturation during fusion. Therefore, reducing such changes can achieve high spectral fidelity. A GIHS-based spectral preservation fusion method that can theoretically reduce spectral distortion is proposed in this study. The proposed algorithm consists of two steps. The first step is spectral modulation (SM), which uses the Gaussian function to extract spatial details and conduct SM of multispectral (MS) images. This method yields a desirable visual effect without requiring histogram matching between the panchromatic image and the intensity of the MS image. The second step uses the Gaussian convolution function to restore lost edge details during SM. The proposed method is proven effective and shown to provide better results compared with other GIHS-based methods.     

A simple two-band semi-analytical model for retrieval of specific absorption coefficients in coastal waters

A non-linear iterative method is used to replace the traditional spectral slope technique in initializing the total absorption decomposition model. Based on comparison of absorption coefficient by QAA and two-band semi-analytical model (TSAA) models with field measurements collected from the West Florida Shelf waters and Bohai Sea, it is shown that both models are effective in estimating absorption coefficients from the West Florida Shelf waters, but the TSAA model is superior to the QAA model. Use of the TSAA model in estimating absorption coefficient in the West Florida Shelf and Bohai Sea decreases the uncertainty of estimation by 1.3–74.7% from the QAA model. The TSAA model’s sensitivity to the input parameters was evaluated by varying one parameter and keeping the others fixed at their default values. Our results indicate that the TSAA model has quite a strong noise tolerance to addressing the field data of the total absorption coefficient.     

Spectral monitoring of moorland plant phenology to identify a temporal window for hyperspectral remote sensing of peatland

Recognising the importance of the timing of image acquisition on the spectral response in remote sensing of vegetated ecosystems is essential. This study used full wavelength, 350–2500 nm, field spectroscopy to establish a spectral library of phenological change for key moorland species, and to investigate suitable temporal windows for monitoring upland peatland systems. Spectral responses over two consecutive growing seasons were recorded at single species plots for key moorland species and species sown to restore eroding peat. This was related to phenological change using narrowband vegetation indices (Red Edge Position, Photochemical Reflectance Index, Plant Senescence Reflection Index and Cellulose Absorption Index); that capture green-up and senescence related changes in absorption features in the visible to near infrared and the shortwave infrared. The selection of indices was confirmed by identifying the regions of maximum variation in the captured reflectance across the full spectrum. The indices show change in the degree of variation between species occurring from April to September, measured for plant functional types. A discriminant function analysis between indices and plant functional types determines how well each index was able to differentiate between the plant functional groups for each month. It identifies April and July as the two months where the species are most separable. What is presented here is not one single recommendation for the optimal temporal window for operational monitoring, but a fuller understanding of how the spectral response changes with the phenological cycle, including recommendations for what indices are important throughout the year.     

A sub-pixel analysis of urbanization effect on land surface temperature and its interplay with impervious surface and vegetation coverage in Indianapolis,United States

This study developed an analytical procedure based upon a spectral unmixing model for characterizing and quantifying urban landscape changes in Indianapolis, Indiana, the United States, and for examining the environmental impact of such changes on land surface temperatures (LST). Three dates of Landsat TM/ETM+ images, acquired in 1991, 1995, and 2000, respectively, were utilized to document the historical morphological changes in impervious surface and vegetation coverage and to analyze the relationship between these changes and those occurred in LST. Three fraction endmembers, i.e., impervious surface, green vegetation, and shade, were derived with an unconstrained least-squares solution. A hybrid classification procedure, which combined maximum-likelihood and decision-tree algorithms, was developed to classify the fraction images into land use and land cover classes. Correlation analyses were conducted to investigate the changing relationships of LST with impervious surface and vegetation coverage. Results indicate that multi-temporal fraction images were effective for quantifying the dynamics of urban morphology and for deriving a reliable measurement of environmental variables such as vegetation abundance and impervious surface coverage. Urbanization created an evolved inverse relationship between impervious and vegetation coverage, and brought about new LST patterns because of LST's correlations with both impervious and vegetation coverage. Further researches should be directed to refine spectral mixture modeling by stratification, and by the use of multiple endmembers and hyperspectral imagery.     

基于光谱分类的太湖水体后向散射研究

由于时空变化而产生的水体后向散射系数参数化差异一直是影响水质参数遥感定量反演精度的一个重要因素。在对太湖遥感反射率光谱进行分类的基础上,针对影响太湖水体水色的不同主导因子,把太湖水体分为3种类型,分别利用半分析方法和光学闭合原理对后向散射系数进行模拟,在此基础上研究其光学特性及其与水体组分浓度的关系,最后针对3种不同主导类型的水体分别建立了后向散射系数参数化模型。将后向散射特性在不同时间和空间上的差异转化为水体不同主导因子在生物-光学上的差异,从而得到适用于太湖不同湖区及不同季节的后向散射系数参数化模型,为利用分析方法对太湖水质参数进行更为精确的遥感反演提供了基础。     

Introducing sensor spectral response into the classification process

Many sensors have their bands overlapped and therefore do not set a normal space. If a spectral distance is measured, as in first-order statistical classifiers, the direct consequence is that the result will not be the most accurate. Image classification processes are independent of the spectral response function of the sensor, so this overlap is usually ignored during image processing. This paper presents a methodology that introduces the spectral response function of sensors into the classification process to increase its accuracy. This process takes place in two steps: first, incident energy values of the sensors are reconstructed; second, the energy of the bands is set in an orthonormal space using a matrix singular value decomposition. Sensors with and without overlapping spectral bands were simulated to evaluate the reconstruction of energy values. The whole process was implemented on three types of images with medium, high and very high spatial resolution obtained with the sensors ASTER, IKONOS and DMC camera, respectively. These images were classified by ISODATA and minimum distance algorithms. The ISODATA classifier showed well-defined features in the processed images, while the results were less clear in the original images. At the same time, the minimum distance classifier showed that overall accuracy of the processed images increased as the maximum tolerance distance decreased compared to the original images.