Flexible membranes anchored to the ground for slope stabilisation: Numerical modelling of soil slopes using SPH

An alternative modelling for flexible membranes anchored to the ground for soil slope stabilisation is presented using Smoothed-Particle Hydrodynamics to model the unstable ground mass in a soil slope, employing a dynamic solve engine. A regression model of pressure normal to the ground, q_sim, and also membrane deflection, f_sim, have been developed using Design of Experiment. Finally, a comparison between the pressure obtained from numerical simulation and from a limit equilibrium analysis considering infinite slope has been carried out, showing differences in the results, mainly due to the membrane stiffness.     

江苏一次锢囚状MCS和相关中涡旋MCV的观测分析

利用常规地面和高空气象观测资料,结合气象卫星云图和雷达回波,分析了2009年6月14日15—23时(北京时,下同),造成江苏强对流天气的一个中尺度对流系统(MCS)的锢囚状特征的形成过程及其垂直结构。地面中尺度分析表明,雷暴高压东侧在飑前倒槽北端发展的闭合低压环流的东南气流将暖湿空气输送到冷性雷暴高压的北侧形成东南一西北向的暖舌,从而形成锢囚状的结构。长三角探空网资料的垂直结构分析表明,在对流层下部地面到850 hPa为冷性的雷暴高压,在对流层中部700 hPa为冷性的α中尺度涡旋(MCV),而500 hPa已转变为暖性的MCV。静力学关系可以说明MCV仅仅存在于700~500 hPa的原因和MCS下冷上暖的热力结构密切相关。     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

Optimal routing for waste collection: a case study in Singapore

ABSTRACT

To collect and dispose growing amounts of municipal solid waste (MSW) changed to be a hot topic along with the rapid urbanization in past decades. Cities are more and more dependent on the incineration instead of landfilling due to the cost-efficiency and environmental concerns. Considering the limited number of incineration plants and complicated situation of transportation in both spatial and temporal dimensions in different cities, the optimal routing for waste collection turns to be meaningful research topic. In this research, the ant colony optimization (ACO)-based multi-objective routing model coupled with min-max model and Dijkstra’s algorithm is proposed to address the question of which route to take from these waste-generating points to the target incineration plant(s) considering travel time, accident probability (black spots), and population exposure, so as to support the routing decision-making. The model is successfully implemented in Singapore and the effectiveness of the model has also been justified. Besides, few limitations of this research have also been discussed, some of which would also be the future directions of our research, especially the design and integration of a web-based routing decision-making support system.     

高分辨率模式雷达回波预报能力分析

利用2018年7—8月GRAPES_3 km、东北短临(WRFRUC)高分辨率模式综合雷达回波预报数据和辽宁省SWAN雷达组合反射率(MCR)实况,基于邻域法FSS评分指数,分析模式在台风北上和副热带高压边缘暴雨过程中的雷达回波预报能力。结果表明:两家模式在不同降水过程中对小阈值雷达回波有较好的预报技巧,随着回波量级增大,模式预报FSS逐渐减小,雷达回波55 dBz时,FSS甚至为0。当邻域半径是3时,35 dBz以下的回波预报中GRAPES模式在台风北上暴雨中的预报技巧低于副热带高压边缘,35 dBz则相反。WRFRUC模式始终表现为台风北上暴雨中预报较好。当邻域半径9时,WRFRUC模式在台风暴雨中的FSS评分高于GRAPES模式,GRAPES模式在副热带高压暴雨中的FSS评分始终高于WRFRUC模式。GRAPES和WRFRUC模式的最大FSS评分技巧均出现在邻域半径是11时,分别为0.239和0.195。GRAPES模式中FSS评分在12 h逐小时预报中前3个时次较强,WRFRUC模式则表现为中间时次强,两头弱。     

GE VCT-高图像质量和低剂量的和谐

在本文中讨论了实现图像质量和X射线剂量的和谐和同一的重要性,介绍了GELightSpeedVCT在硬件,软件和临床应用上降低病人剂量的方法。VCT在实现各向同性高分辨率的同时努力提高X射线的有效利用率,降低病人剂量,真正实现了高图像质量和低剂量的和谐。     

硬X射线成像仪量能器测试系统的设计与实现

硬X射线成像仪(Hard X-ray Imager, HXI)是先进天基太阳天文台(Advanced Space-based Solar Observatory, ASO-S)的3大载荷之一, 其中量能器作为其重要组成部分, 承担着观测30--200keV能段的太阳硬X射线的任务. 在卫星发射之前, 需要开展大量的测试工作, 以确保HXI量能器的各项功能和性能满足设计需求. HXI量能器通道数众多, 内含99个溴化镧探测器, 分别由8块相同的前端电子学板控制. 除了对各个通道的性能进行测试外, 地检系统还需模拟量能器在轨面对不同太阳活动时的运行情况, 对量能器进行全面完备的测试. 此外, 地检系统还需足够稳定, 能满足量能器在单机测试、环境试验、热真空与振动等多个不同测试项目的长时间测试需求. 为此, 设计了地检板与上位机软件, 结合放射源、直流电源、高压模块等组成一套HXI量能器的地检系统, 对8块前端电子学板实现同步配置与管理, 能高效完成指令发送与数据接收, 满足量能器最大数据输出带宽400Mbps的需求. 利用该系统, 在地面完成了HXI量能器的功能、性能验证, 获得了量能器的线性、死时间、能量分辨率等各项性能指标, 为HXI量能器的在轨高性能运行提供了保障.     

城市与工程测量EDM导线技术标准的分析

基于导线测量误差理论与电磁测距(EDM)导线的特性,分析讨论了城市与工程测量EDM导线的各项技术参数,提出了各级EDM导线技术标准的建议,通过计算验证所给出的这些技术指标是合理可靠的。     

Correspondence between the large volcanic eruptions and ENSO events over AD 1525–2000

ENSO is an interannual mode which may be affected by external forcing, such as volcanic eruptions. Based on the reconstructed volcanic eruptions chronology and ENSO sequences, both 195 large volcanic eruptions(VEI≥4) and 398 ENSO(El Ni?o and La Ni?a) events were extracted from 1525 to 2000. An analysis of the correspondence between the large volcanic eruptions and ENSO events was performed by matching the large volcanic eruptions with the types and magnitudes of ENSO events present in the 0–2 years after the eruptions. The results show the following:(1) The percentages of ENSO events within the 3 years after the large eruptions had increased to 68.3% from 31.7% compared with those with no-eruptions in the previous 0–2 years. In addition, the ratio of El Ni?o to La Ni?a events turned from 2:3 to 1:1, and more El Ni?o events occurred in the 0 year after eruptions in the low-latitudes of the Northern Hemisphere and in the tropics but more La Ni?a events occurred in the 0 year after in the high-latitudes of the Northern Hemisphere and the Southern Hemisphere.(2) After the eruptions, the weak(W) El Ni?o events had increased by 8 percentage points and the very strong(VS) El Ni?o events had decreased by 10 percentage points; conversely, there was a decrease by 15 percentage points of the weak La Ni?a events and an increase by 11.4 percentage points of the very strong La Ni?a events. Specifically, the percentages of strong La Ni?a events increased to a peak at 1(+1) year after the eruptions.(3) The percentage of eruptions followed by single-year ENSO was the greatest. The percentage of ENSO events that occurred in the consecutive 2 years following an eruption was approximately equal to the percentage of events that occurred consecutively 3 years following an eruption, and both sets of ENSO magnitudes showed a decreasing trend.