A Model-Based Approach to Semi-Automated Reconstruction of Buildings from Aerial Images

Automated reconstruction of building objects from aerial images is a complex problem due to the diversity of buildings as well as noise and low contrast of images, which are the results of distant photography, atmospheric effects and poor illumination. In this paper, a semi-automated approach to the reconstruction of parametric building models from aerial images is presented, which works with line segments extracted from the image. The model is selected interactively from a library of parametric models. A perceptual grouping technique is used to select the most significant image lines in terms of relations such as proximity and parallelism. Model lines are searched for the same relations as in the grouped image lines, and the corresponding lines undergo a matching procedure, which determines whether or not a match can be found between the given model and image lines. An experiment with aerial images of flat-roof and gable-roof buildings is shown and its results indicate the robustness and efficiency of the proposed approach.     

南极冰貌卫星影像条带噪声的剔除

本文在简要叙述条带噪声形成原因的基础上 ,针对南极地区的ASTER 1A的可见光影像中出现的条带噪声的现象 ,通过设计了基于切比雪夫窗、凯瑟窗的FIR滤波器和约束最小二乘FIR滤波器对其条带噪声进行剔除 ,这两种滤波器能够尽可能地剔除条带 ,同时使影像的灰度分布发生最小畸变。并通过与其他方法 (例如 :低通滤波 ,直方图匹配等 )比较 ,说明这两种滤波的方法优于其他的方法     

Automatic Road Change Detection and GIS Updating from High Spatial Remotely-Sensed Imagery

This paper presents a tramework for road network change detectlon In order to upctate the Canadian National Topographic DataBase (NTDB). The methodology has been developed on the basis of road extraction from IRS-pan images (with a 5.8 m spatial resolution) by using a wavelet approach. The feature matching and conflation techniques are used to road change detection and updating. Elementary experiments have showed that the proposed framework could be used for developing an operational road database updating system.     

高分辨率遥感影像的精纠正

论述了对高分辨率遥感影像进行精纠正获得正射影像的关键技术。若干实际不同分辨率的高分辨率遥感影像被用于相应的实验，实例证明了本文算法的正确性。     

基于物方影像匹配和概率松弛的断面自动提取

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.     

基于光谱角匹配算法的水体信息提取研究

针对水体信息提取时,传统算法不能较好地解决山体阴影被误提为水体的问题,引入多用于高光谱数据处理的光谱角匹配算法,以Land-sat8 OLI(band1-band7)为数据源,以黄河小浪底水库周边区域为实验区,开展水体信息提取研究,结果显示:水体指数法和波段关系提取的结果中有大量的山体阴影信息,提取精度不超过30%,而光谱角匹配法提取结果受阴影的影响较小,提取精度在99%以上。     

SAR影像与光学影像的高斯伽玛型边缘强度特征匹配法

提出了一种基于影像边缘强度图描述的SAR影像与光学影像匹配方法。首先对影像进行粗纠正,消除影像之间的尺度和旋转变化;其次,改进相位一致性特征检测方法,提取对影像相干斑噪声稳健的特征点;然后基于高斯伽玛型双边窗口比值算子计算影像边缘强度图,在此基础上构造不变特征描述符;最后联合几何约束条件,实现SAR影像与光学影像匹配。试验结果证明,与现有方法相比,本文方法能够大幅提高SAR影像与光学影像匹配结果中的正确匹配特征数量以及影像配准精度。     

历史数据和强化学习相结合的低频轨迹数据匹配算法

针对低频(采样间隔大于1min)轨迹数据匹配算法精度不高的问题,提出了一种基于强化学习和历史轨迹的匹配算法HMDP-Q,首先通过增量匹配算法提取历史路径作为历史参考经验库;根据历史参考经验库、最短路径和可达性筛选候选路径集;再将地图匹配过程建模成马尔科夫决策过程,利用轨迹点偏离道路距离和历史轨迹构建回报函数;然后借助强化学习算法求解马尔科夫决策过程的最大回报值,即轨迹与道路的最优匹配结果;最后应用某市浮动车轨迹数据进行试验。结果表明:本文算法能有效提高轨迹数据与道路匹配精度;本算法在1min低频采样间隔下轨迹匹配准确率达到了89.2%;采样频率为16min时,该算法匹配精度也能达到61.4%;与IVVM算法相比,HMDP-Q算法匹配精度和求解效率均优于IVVM算法,16min采样频率时本文算法轨迹匹配精度提高了26%。