Identification of strength equilibrium rock slopes: Further statistical considerations

Strength equilibrium slopes are rock slopes whose gradient θ and rock mass strength (RMS) are in adjustment. The identification of such slopes depends on the accurate specification of the strength equilibrium envelope. Previous attempts to delimit the envelope are reviewed and modifications are proposed that permit its more rigorous statistical definition. Because θ can be measured much more reliably than RMS, the structural relation between these variables is estimated by regressing RMS on θ, and the strength equilibrium envelope is defined by the 95 per cent confidence limits. The analysis is performed on a data set of 268 rock slopes, representing all the data on RMS and θ hitherto employed in published studies of strength equilibrium slopes.     

Source mechanisms and microfracturing during uniaxial cycling of rock

Focal mechanisms for 116 acoustic emission events associated with uniaxial cyclic loading of Westerly granite have been investigated using P-wave first-motions. Polarities were observed at eight transducers positioned on the sample to provide good azimuthal coverage. The P-wave radiation patterns can be fit by a quadrupole source but not by a simple pure tensional source. The predominant orientations of the two nodal planes for the quadrupole fit were subparallel to and perpendicular to the ₁ direction. Events with close hypocenters, i.e., within a radius of 3 mm, display a remarkable similarity in focal mechanisms irrespective of the cycle or time within a cycle at which they occur. The polarity observations of 48 of 116 acoustic emission events could be fit with the simple quadrupole indicating that the microfracturing processes even in uniaxial compression often simplistically portrayed as propagating axial cracks are indeed quite complex.     

Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling

Summary This paper presents the results of centrifuge tests that were aimed at validating the Goodman-Bray method for rock slope toppling analysis. The Goodman-Bray method was extended by the authors to accommodate non-persistent basal planes of rock columns. Two gypsum column models, with and without anchors were used to represent the failure modes. Measured critical centrifuge accelerations were in agreement with the results obtained from numerical modeling. A background of the toppling slope failures associated with a large hydropower project in China instigated the need for the centrifuge study. The centrifuge model tests used an artificial rock. The observed failure mode did not follow a straight failure plane as proposed by Goodman and Bray. The failures revealed a bi-planar slip surface with a deep-seated portion near the toe of the slope. The outcomes of the centrifuge tests illustrated the need to search for the critical failure surface when performing a toppling analysis. The search technique is similar to that usually performed in a conventional sliding analysis.     

永平水泄铜钴矿控矿因素

水泄铜钴矿区地质条件较为复杂,控矿因素较多,通过分析认为主要受断层及岩性控制,地层初始富集,构造及区域变质作用提供通道及热源。水的循环、溶解作用形成热卤水成矿。     

Collapse of caves at shallow depth in Gaziantep city center,Turkey: a case study

This paper focuses on an investigation of the possible causes for the collapse of limestone caves in Gaziantep, Turkey. The city contains a lot of man-made caves, at a shallow depth, of various width and length. These caves were mainly excavated to provide work or storage space. As the city has been growing fast with increased population, many structures were constructed over these caves. Recently, two caves collapsed and five houses were damaged. These caves are all made of limestone and it was observed after the collapse that the limestone was saturated with water due to sewer pipe leakage and surface water. Tests were carried out on the limestone and it was determined that the compressive strength of limestone decreases by about 50% and the tensile strength decreased by about 80% when saturated with water. It was concluded that the reduced strength of the limestone combined with additional loads due to the factors mentioned above seem to be the main reason for these collapses.     

岩体质量分级的风险分析方法

提出了基于RMR岩体质量分级系统的岩体质量研究风险分析方法。该方法分析步骤如下 :(1)通过岩芯样品的现场观测和实验室试验获得分类所需的变量 ;(2 )统计分析拟合得出各变量的分布函数及参数 ;(3)运用Monte Carlo模拟方法获得 2万个RMR值 ,并将结果绘成岩体质量描述图 ;(4)利用以上结果作出岩体质量风险分析评价。该方法用于润扬长江公路大桥岩体质量评价研究获得良好效果     

南秦岭凤凰山地区元古代构造基底特征

依据在原划武当岩群中获得的 1 6 86± 4 5Ma (锆石U -Pb)同位素测年资料 ,结合岩石学、岩石地球化学及区域地层对比 ,从中解体出姚坪岩组。通过岩石学、岩石地球化学、构造特征、变质变形特征研究及形成环境探讨认为 :南秦岭凤凰山元古代武当岩群 (包括姚坪岩组、杨坪岩组 )变质火山岩系为古—中元古代时期多岛洋构造环境过渡基底建造 ;耀岭河岩组浅变质火山岩为本区Rodina事件的产物。该成果对南秦岭构造基底的组成、发展、演化研究具有重要意义。     

随机-模糊处理方法在岩石力学指标统计及岩组划分中的应用

探讨了随机 模糊处理方法在岩石力学指标统计和岩组定量划分中的应用。文中对计算中的隶属函数取值及迭代方式进行了深入讨论。通过计算结果的比较分析, 认为随机 模糊处理方法更符合实际, 并优于其他方法。最后作者提出了岩组定性划分 岩石样本参数的随机 模糊统计分析 岩组定量划分及参数重新统计的分析程序。     

塔里木北部地区岩石物性参数测试和区域层滑系统的确定

为了定量地研究塔里木北部地区区域的层次结构．拆离构造，特别是同油气地质、圈闭构造密切相关的沉积盖层中的层滑倾滑和推覆滑覆等各种构造的形成机制，对该区沉积盖层进行了较系统的岩石物性和岩石力学标本采集和测试（包括三轴参照实验）．依其参数结构特点和地质、物探资料，划分出４套７层区域性层滑系统，并与研究程度较高的中、下扬子区的物性参数、岩性组合和构造特征进行综合对比．最后还进一步阐明了塔里木北部地区特征的前列式冲断构造和含油气局部构造等，均受到这７层区域层滑系统的制约．