城市环境下基于降维Kalman滤波的室内导航算法

提出了一种适用于室内超宽带定位的降维Kalman滤波算法,结合LSE算法与降维Kalman滤波算法进行定位求解,以数值仿真试验及物理试验验证了其有效性。     

自适应卡尔曼滤波在GPS/DR组合导航中的应用

针对在观测条件较差的情况下卡尔曼滤波的鲁棒性较差,本文设计了一种自适应卡尔曼滤波模型。通过实际车载GPS/DR组合导航试验,结果表明该模型在观测质量较差的情况下能够抑制较大的偏差,相对于标准卡尔曼滤波模型,其平面定位精度提高了近一倍,达到2～3m。因此,在观测环境较差的情况下建议采用渐消自适应卡尔曼滤波模式进行组合导航。     

基于热层电离层耦合数据同化的热层参量估计

本文采用高效集合卡尔曼滤波(EnKF)算法和背景场热层电离层理论模式NCAR-TIEGCM,开发了热层电离层数据同化系统.基于全球空地基GNSS电离层斜TEC观测、CHAMP和TIMED/GUVI热层参量观测构型设计了系列观测系统模拟实验,对热层参量进行估计.实验结果表明,(1)通过集合卡尔曼滤波算法同化电离层TEC观测能够较好地优化热层参量.(2)中性质量密度优化效果在整个同化阶段均有提升,提升百分比能达到40%.(3)积分氧氮比在同化阶段也能得到较好的优化,但在电子密度水平梯度变化剧烈区域效果较差.最后本文对中性质量密度进行了预报评估,结果表明,由于中性成分优化,在地磁平静条件下其预报时间尺度可长达24h.     

自适应卡尔曼滤波在航空重力异常解算的应用研究

依据航空重力测量基本原理,构建了航空重力异常解算的卡尔曼滤波模型,将新息自适应卡尔曼滤波器(IAE,Innovation based Adaptive Estimation)应用于量测噪声未知的航空重力异常解算.针对IAE滤波器滑动窗口宽度难以准确确定的问题,通过对多个不同滑动窗口新息协方差估计的加权平均,获得改进的IAE滤波器,该IAE滤波器不仅具有量测噪声自适应估计能力,还能实现滑动采样窗口的优化选取.试验结果表明,IAE滤波器可以降低因量测噪声统计信息不明引起的解算误差,改进IAE解算的重力异常误差约为1mGal.     

相邻历元误差相关的抗差卡尔曼滤波算法分析

根据卡尔曼滤波理论以及抗差理论,本文推导出了相邻历元误差相关的抗差卡尔曼滤波模型,其对观测值中含有粗差有良好的抗差性。通过对含有粗差的变形监测数据分析,与相邻历元误差相关的卡尔曼滤波模型进行比较,采用本文构造的抗差卡尔曼滤波模型处理数据,无论是否有粗差存在观测值里,变形计算结果与实际结果大体一致,粗差对计算结果的影响不敏感。在对变形监测数据分析时,可得出卡尔曼滤波方法估计的状态向量,没有寄存大量的以往观测数据,而是使用最近的观测数据,经过不断的预测和改正,把新的状态展示在系统中。     

基于输出反馈的建筑结构闭开环次优控制

对传统的结构抗震闭开环控制算法进行改进。基于地面运动自回归模型,采用Kalman滤波利用可以量测到的地面加速度激励对未来时段即将发生的地面加速度激励进行预估,并在微分方程的求解中引入精确高效的精细积分算法。考虑到实际控制中量测全部状态变量的困难,改进算法仅需量测部分状态变量。数值仿真表明,基于输出反馈的闭开环次优控制策略能大大降低结构的地震响应。     

Implementation of online model updating in hybrid simulation

Hybrid simulation combines numerical and experimental methods for cost‐effective, large‐scale testing of structures under simulated earthquake loading. Structural system level response can be obtained by expressing the equation of motion for the combined experimental and numerical substructures, and solved using time‐stepping integration similar to pure numerical simulations. It is often assumed that a reliable model exists for the numerical substructures while the experimental substructures correspond to parts of the structure that are difficult to model. A wealth of data becomes available during the simulation from the measured experiment response that can be used to improve upon the numerical models, particularly if a component with similar structural configuration and material properties is being tested and subjected to a comparable load pattern. To take advantage of experimental measurements, a new hybrid test framework is proposed with an updating scheme to update the initial modeling parameters of the numerical model based on the instantaneously‐measured response of the experimental substructures as the test progresses. Numerical simulations are first conducted to evaluate key algorithms for the selection and calibration of modeling parameters that can be updated. The framework is then expanded to conduct actual hybrid simulations of a structural frame model including a physical substructure in the laboratory and a numerical substructure that is updated during the tests. The effectiveness of the proposed framework is demonstrated for a simple frame structure but is extendable to more complex structural behavior and models. Copyright © 2013 John Wiley & Sons, Ltd.     

State estimation of tidal hydrodynamics using ensemble Kalman filter

This paper presents a coupling of an ensemble Kalman filter (EnKF) with a discontinuous Galerkin-based, two-dimensional circulation model (DG ADCIRC-2DDI) to improve the state estimation of tidal hydrodynamics including water surface elevations and depth-integrated velocities. The methodology in this paper using EnKF perturbs the modeled hydrodynamics and bottom friction parameterization in the model while assimilating data with inherent error, and demonstrates a capability to apply EnKF within DG ADCIRC-2DDI for data assimilation. Parallel code development presents a unique aspect of the approach taken and is briefly described in the paper, followed by an application to a real estuarine system, the lower St. Johns River in north Florida, for the state estimation of tidal hydrodynamics. To test the value of gauge observations for improving state estimation, a tide modeling case study is performed for the lower St. Johns River successively using one of the four available tide gauging stations in model-data comparison. The results are improved simulations of water surface elevations and depth-integrated velocities using DG ADCIRC-2DDI with EnKF, both locally where data are available and non-locally where data are not available. The methodology, in general, is extensible to other modeling and data applications, for example, the use of remote sensing data, and specifically, can be readily applied as is to study other tidal systems.     

利用重力异常匹配技术实现潜艇导航

潜艇的惯性导航误差是随时间积累的,利用重力异常数据进行辅助导航可以对惯性导航的漂移误差进行校正.首先利用2′×2′重力异常数据库作为基础信息,结合Kalman滤波算法对某区域进行了模拟计算,模拟过程采用了增益系数和信息更新序列的新方法进行Kalman 滤波的处理,结果表明在重力异常变化幅度较大的地区,重力异常可以进行潜艇的辅助导航.     

卡尔曼滤波在滑坡监测中的应用

针对滑波变形的特点,将滑坡体上的监测点视为一运动点场,提出一种以运动方程为核心、以卡尔曼滤波技术为工具的变形观测数据处理方法,使滑坡的预报成为可能.