Optical spectrum based measurement of flotation slurry contents

Monitoring and control of a flotation circuit is mainly based on the information gained by assaying the process slurry lines. In flotation plants, usually an X-ray fluorescence analyzer is used to obtain the on-line assays. This article introduces the visual and near-infrared reflectance spectroscopic analysis of the process slurries as a supplementary method which complements the on-line assay information available from an X-ray fluorescence analyzer. It is shown that the spectral information can be used to accurately predict the element contents in the slurry in between successive XRF analyses. Since the spectral measurements can be taken with high frequency as opposed to the sparse X-ray fluorescence analysis, a practically continuous on-line estimate of the slurry contents is reached. These estimates can be used in the plant control to improve the overall performance of the circuits and to yield also economical savings. Additionally, the frequent monitoring of the grades can provide means to eliminate rapid disturbances in the circuits, thus improving the stability of the process.     

强降雨条件下土质边坡瞬态稳定性分析

基于实际降雨气象资料,设计了单峰降雨和8个不同时间间隔的双峰降雨计算方案,利用非饱和土力学理论,对边坡的瞬态稳定性进行了计算和分析,研究了水分在坡体内的运移对边坡稳定性的时间空间影响效应,同时考察了降雨入渗造成的土性渗透特性的改变。分析发现：一次降雨的影响历时约12 d,降雨后约0.5 d该类土质边坡最危险;不同时间间隔的两次降雨对边坡稳定的影响比单峰降雨的最小安全系数滞后约0.3 d～0.8 d,影响历时基本保持不变;土体物理力学性质、边坡最危险滑动面及其对应的安全系数随水分在坡体内渗透运移而变化。     

鲢鱼(Hypophthalmichthys molitrix)摄食强度和节律的实验研究

报道用室内实验方法对鲢鱼摄食强度和摄食节律的研究结果,探讨了影响它们的因子。提出鲢鱼在不同水温、不同花粉密度及不同鱼规格下的摄食量的统计分析。指出:食粒密度和水温与摄食量正相关,而鱼规格与摄食量负相关;食粒密度对摄食量影响最大(P<0.01),其次为水温;水温和食粒密度在影响摄食量的过程中可能有一定的交互作用。鲢鱼摄食强度在室内条件下也具明显的昼夜节律。在食粒规格较小、密度较低且溶氧充足条件下,鲢鱼夜晚非但不停食且出现摄食率次高峰。在本实验条件下,鲢鱼的日摄食节律与水温和光照无关,可能受饵料可得性和自身的生物钟节律等制约。     

非线性洋面温度反演

本文从辐射方程出发，简述洋面温度与亮度温度之间的非线性关系，进行非线性洋面温度反演的方案设计，用正演算法 计算出非线性洋面温度反演公式的回归系数，对样进行检验。     

南黄海灾害地质因素及分区

尝试性地将南黄海灾害地质因素分为4大类。同时参考地貌沉积界线和其他因素将南黄海分成4个灾害地质区：即海岸带、苏北浅滩、海州湾和南黄海东部灾害地质区，并时各灾害地质区进行了定性评价，苏北浅滩灾害地质区是研究区内灾害地质环境最不稳定的区域。     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

Calculating Method and Verification of Wave Pressure Distribution on the Breast Wall of Mound Breakwater

In this paper, the calculating charts and formulae about wave pressure on the breast wall are derived with seven parameters on the basis of physical model study. The verification shows that the charts agree with the example, and are adopted in the Specifications of Fishery Harbours Breakwater by the Ministry of Agricultures.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

唐山市滨海湿地动态演变特征及其机制分析

利用历史资料和Landsat TM卫星遥感图像,研究了唐山市滨海湿地自建国以来的演变特征,着重对1987~2004年陡河———滦河之间的滨海平原湿地类型进行了识别,绘制了不同时期的景观面解译图。利用Mapinfo制图软件计算出两个时期的面积(比例)转化矩阵,显示该区滨海湿地破碎化加重,其动态演变特征呈明显退化趋势,进而提出引起其退化的原因和发展趋势预测。