伪欧空间中的等距变换

研究伪欧空间Fn+k,k中等距变换的性质,主要结论如下:(1)伪欧空间En+k,k中一个变换T是等距变换的充分必要条件:对点x∈En+k,k,定点x0∈En+k,k及一个正交矩阵A,使T(x)=xA+x0成立;(2)En+k,k中的所有等距变换构成一个变换群。     

Three-dimensional investigations of wave overtopping on rubble mound structures

To study the influence of wave obliquity and directional spreading on wave overtopping of rubble mound breakwaters a total of 736 three-dimensional model tests were carried out at Aalborg University. The results of these tests are presented and analysed in this paper yielding a new empirical reduction factor to describe the influence of wave obliquity and directional spreading on the average wave overtopping discharges. The study shows that perpendicularly incident, long-crested waves result in conservative values of the overtopping discharge for the tested cross-section.     

大倾角时的声学多普勒测速公式误差分析

国内外在声学多普勒测速误差分析和修正算法方面已作了大量的研究工作.一般认为JANUS配置方式下,多普勒频移公式的简化误差可忽略.文中从理论上对多普勒测速的原理公式的简化过程进行分析,研究了大倾角状态下的测速公式的相对误差,认为在高速、大倾角工况下公式简化误差不可忽略,并提出了修正公式.     

单程波算子积分解的象征表示

单程波波场延拓算子在地震偏移成像中有重要应用.单程波波场延拓算子按其实现方式可分为Kirchhoff积分、空间隐式有限差分和Fourier变换方法,他们代表了算子的不同表示方法,当截断使用这些方法时会得到不同的精度.象征表示对这些方法的导出和精度分析有重要作用.算子作用于正弦波函数所得函数称为算子的象征.算子的象征是褶积算子Fourier变换的推广.Fourier变换方法则直接用象征函数的可分表示求出.空间隐式有限差分则可以用象征函数的Padè近似或部分分式导出.单程波算子在深度域的积分称为单程波算子积分解.本文推导了单程波算子积分解的象征表达式,给出了算子象征的代数运算的头几阶表达式,这些表达式还未在前人文献中发现.Kirchhoff积分所需格林函数可以通过象征函数和鞍点法导出.基于积分解的象征表达式给出了非对称走时公式,对改善Kirchhoff积分的聚焦性能有重要意义.     

INFLUENCES OF OBLIQUITY ANGLE DIFFERENCE ON THE EVOLUTION OF FEN-WEI RIFT: A STUDY FROM SEGMENTED TRANSTENSION CLAY MODEL

The Fen-Wei rift is composed of a series of Cenozoic graben basins, which extends in an S-shape and strikes mainly NNE. Two distinct types of basins are defined in the Fen-Wei rift. The NEE-striking basins(or basin system) are bounded by active faults of mainly normal slip while the NNE-striking basins are characterized by their dextral strike-slip boundary faults. The adjacent NEE-striking basins(or basin systems) are linked by the arrangement of NNE-striking basins and horsts that is called the linking zone in this study. The segmentation of the Fen-Wei rift shows that the geometry and the activity of different rift segments are varied. The southern and northern rift segments strike NEE and are characterized by tensile movement while the central rift segment strikes NNE with transtensional motion. Previous field surveys show that the ages of the Cenozoic basins in the Fen-Wei rift are old in the southern rift segment, medium in the northern rift segment, and young in the central rift segment. The sizes of linking zones are large in the central rift segment, medium in the northern rift segment, and small in the southern rift segment. In addition, the east tip of Xinding Basin propagates towards NEE along the northern rift segment and the west tip of the basin grows towards NNE, while the shape of Linfen Basin is almost antisymmetric with respect to the Xinding Basin. However, the previous laboratory or numerical simulations cannot explain these features because they didn't pay enough attention to the control of the rift segmentation on the evolution of NEE-striking basins and their linking zones. In this study, based on the previous field studies, we study the fracture process of a clay layer under the segmented dextral transtension of the basement. The spatiotemporal evolution of the deformation field of the clay layer is quantitatively analyzed via a digital image correlation method. The experiment reproduced the main architecture of the Fen-Wei rift. The results show that:(1) The chronological order of basin initiation and the different sizes of linking zones in deferent rift segments are caused by the different obliquity angles(the angle between the rift trend and the displacement direction between the opposite sides of the rift) among the southern, northern and central rift segments.(2) The interaction between adjacent NEE-striking basins leads to the formation of NNE-striking linking zones.(3) The interaction between adjacent rift segments may cause the special distribution of Xinding and Linfen Basins. Thus, we propose that the differences of the Fen-Wei rift segments are mainly controlled by the different obliquity angles. The lack of considering the influences of pre-exiting structures leads to the limited simulation of the details within the southern and northern segments of the Fen-Wei rift. Further studies may improve the model if this is taken into account.     

The issues of prestack reverse time migration and solutions with Graphic Processing Unit implementation

Prestack reverse time migration (RTM) is a very useful tool for seismic imaging but has mainly three bottlenecks: highly intensive computation cost, low‐frequency band imaging noise and massive memory demand. Traditionally, PC‐clusters with thousands of computation nodes are used to perform RTM but it is too expensive for small companies and oilfields. In this article, we use Graphic Processing Unit (GPU) architecture, which is cheaper and faster to implement RTM and we obtain an order of magnitude higher speedup ratio to solve the problem of intensive computation cost. Aiming at the massive memory demand, we adopt the pseudo random boundary condition that sacrifices the computation cost but reduces the memory demand. For rugged topography RTM, it is difficult to deal with the rugged free boundary condition with the finite difference method. We employ a simplified boundary condition that avoids the abundant logical judgment to make the GPU implementation possible and does not induce any sacrifice on efficiency. Besides, we have also done some tests on multi‐GPU implementation for wide azimuth geometries using the latest GPU cards and drivers. Finally, we discuss the challenges of anisotropy RTM and GPU solutions. All the jobs stated above are based on GPU and the synthetic data examples will show the efficiency of the algorithm and solutions.     

Zn(II) Ion Biosorption onto Surface of Eucalyptus Leaf Biomass: Isotherm,Kinetic, and Mechanistic Modeling

Bioremediation of Zn(II) by biosorption across aqueous phase on to surface of eucalyptus leaf powder has been investigated in present research work. The adsorptive potential of eucalyptus leaf powder was evaluated as function of pH, temperature, contact time, agitation rate and particle size. Maximum metal ion uptake and percentage removal capacity of eucalyptus leaf powder were 23.5 mg g⁻¹ and 94%, respectively, at optimized pH 5, 20 ± 1°C, contact time 6 h, particle size 0.5 mm and agitation rate 200 rpm. The biomass surface analysis revealed the fact that the biomass surface was heterogeneous and porous in nature. The functional groups like amine, amide, carboxyl, hydroxyl, and methyl groups, significantly important for metal ion binding were present on biomass surface in tremendous amount. Additionally, the Fourier transformation IR spectrum analysis of acid and base activated eucalyptus leaf biomass ruled out all the possibilities of the presence of surface functional groups mentioned above. The reaction rate was studied by applying two rate limiting models pseudo first and pseudo second order. Pseudo second order model was found to be more suitable (R² = 0.998) in comparison to pseudo first order (R² = 0.724). Adsorption equilibrium of batch stirred reaction data fitting shows the dominance of Langmuir isotherm (R² = 0.99) against Freundlich isotherm (R² = 0.887) model with equipartitional involvement of both film and intra particle diffusion as rate limiting steps at differential status of contact time.     

VAX计算机及图象系统硬磁盘扩充

本文介绍了为VAX计算机系统扩充硬磁盘以及为ARIES-Ⅱ图象处理系统建立图象伪磁盘的方法及步骤。     

International accreditation of sandwich hybridisation assay format DNA probes for micro‐algae

The sandwich hybridisation assay (SHA) is a DNA probe‐based method for rapid identification and enumeration of toxic micro‐algae which uses species specific oligonucleotide probes targeted at ribosomal RNA. It is suited to fragile micro‐algal cells which commonly collapse during the fixation stage of sample collection, compromising identification by traditional microscopy. The assay has been available for research for several years, but was validated and accepted for international accreditation for commercial laboratory use in New Zealand in May 2004 (International Accreditation New Zealand: ISO 17025). During the validation of the raphidophyte assay, some discrepancies were noted between SHA cell concentration estimates and traditional light microscope cell counts. Higher SHA estimates were recorded when blooms had collapsed but rRNA was still present in sea water. Conversely, higher traditional cell counts occurred when sample delivery was delayed more than 48 h, presumably owing to degradation of rRNA in the live cultures used for the SHA. SHA cell concentration estimates of the toxic diatom bloom‐former Pseudo‐nitzschia australis were also compared with whole cell format DNA probe counts and traditional microscope counts; SHA counts were comparable for the three methods tested.