Ocean tide loading (OTL) displacements from global and local grids: comparisons to GPS estimates over the shelf of Brittany, France

In this paper we examine OTL displacements detected by GPS stations of a dedicated campaign and validate ocean tide models. Our area of study is the continental shelf of Brittany and Cotentin in France. Brittany is one of the few places in the world where tides provoke loading displacements of ∼10–12 cm vertically and a few cm horizontally. Ocean tide models suffer from important discrepancies in this region. Seven global and regional ocean tide models were tested: FES2004 corrected for K2, TPXO.7.0, TPXO.6.2, GOT00.2, CSR4.0, NAO.99b and the most recent regional grids of the North East Atlantic (NEA2004). These gridded amplitudes and phases of ocean tides were convolved in order to get the predicted OTL displacements using two different algorithms. Data over a period of 3.5 months of 8 GPS campaign stations located on the north coast of Brittany are used, in order to evaluate the geographical distribution of the OTL effect. We have modified and implemented new algorithms in our GPS software, GINS 7.1. GPS OTL constituents are estimated based on 1-day batch solutions. We compare the observed GPS OTL constituents of M₂, S₂, N₂ and K₁ waves with the selected ocean tide models on global and regional grids. Large phase-lag and amplitude discrepancies over 20° and 1.5 cm in the vertical direction in the semi-diurnal band of M₂ between predictions and GPS/models are detected in the Bay of Mont St-Michel. From a least squares spectral analysis of the GPS time-series, significant harmonic peaks in the integer multiples of the orbital periods of the GPS satellites are observed, indicating the existence of multipath effects in the GPS OTL constituents. The GPS OTL observations agree best with FES2004, NEA2004, GOT00.2 and CSR4.0 tide models.     

新疆温泉县北达巴特斑岩铜钼矿地质特征及成因初探

北达巴特斑岩铜钼矿产于华力西期流纹斑岩中,矿体呈脉状,铜矿体地表为氧化物,钼矿体主要赋存于深部的流纹斑岩中,其矿化作用呈上铜下钼的双层矿化结构模式,矿化为细脉浸染状。矿床的成因类型为斑岩型铜钼矿。     

利国矿区铜（金）成矿条件的研究

利国矿区是江苏省重要铁矿基地之一,矿区位于秦岭一昆仑纬向构造带东延的南侧与新华夏构造体系第三隆起带的交接复合部位。铁矿床主要产于燕山期闪长玢岩杂岩体与下奥陶统碳酸盐地层的接触带及其附近灰岩中,矿体呈似层状一透镜状等,产状与围岩一致,具层控矿床的特征。笔者主要从成矿地质特征着手,分析总结了该区铜、金矿化特征及主要成矿规律,指出了利国矿区铜（金）矿的找矿方向和有望靶区。     

二三维联动的虚拟校园设计与实现

传统的2维地理信息系统技术成熟但缺乏3维可视化和分析的能力,而目前的3维地理信息系统发展可拥有3维可视化分析能力,然而还缺少2维地理信息系统的便捷。以二三维联动为开发思路的地理信息系统能够解决这对矛盾。本文基于二三维联动GIS的设计方案,以虚拟校园设计与实现为应用实例,利用ArcEngine（AE）实现二三维联动GIS系统的开发设计,对GIS系统的开发做出了一种新的、有益的尝试。     

基于圆增长特征的点状要素群选取算法

控制点、独立地物等在地图上呈点群状表达,如何高效、合理地实现此类要素的自动综合是地图多尺度表达的重要问题。文中在前人研究的基础上,提出一种基于圆增长特征的点状要素群结构化选取算法,实现点状要素群的自动选取。其基本原理是：根据一个点与其周围点重要性程度的比较来确定该点删除与否,从而确保其拓扑关系和几何信息的正确性。实验证明：该算法实用、有效。     

GPS精密单点定位的数据处理方法综述

在GPS精密单点定位数据处理中,通常采用基于非差观测值的处理方法。然而精密单点定位也可通过观测值不同差分组合以减少某些未知参数,且在理论上与非差模型等价。文中介绍基于非差和差分模型的精密单点定位的几种数据处理方法,并对各种模型进行比较。     

三峡库区高切坡致灾因素及防护对策——以重庆市万州区为例

三峡库区百万移民的搬迁建设导致大量高切坡的形成。未及时治理或治理不当的高切坡,不同程度地发生破坏,影响了人们的正常生活,甚至引发了地质灾害。因此,科学认识及治理高切坡十分必要。重庆市万州区高切坡主要有风化及差异风化、崩塌和土体滑塌等破坏形式。影响破坏的因素主要为工程地质条件、气候及时间效应。针对高切坡不同的破坏形式,以安全、经济及环境和谐的人文理念作为设计指导思想,充分论证了高切坡的防护方案,即：削坡、排水以及格构防护较适合万州区高切坡的防护。这些措施,既能很好地解决高切坡的防护问题,又能兼顾环保、降低造价。研究结果可以作为三峡地区高切坡类地质灾害防护设计的参考。也可为其它流域类似问题借鉴。     

含盐量对松嫩平原碳酸盐渍土抗剪强度的影响

松嫩平原分布着大量的碳酸盐渍土,其不良的工程性质给穿越其中的道路质量造成不同程度的影响。由于盐渍土所含易溶盐成分主要为碳酸氢钠,该研究通过向碳酸盐渍土内加入碳酸氢钠制备不同含盐量的盐渍土,进行室内直剪试验。试验表明：随着含盐量的增加土的粘聚力减小,内摩擦角有先减小后变大的趋势;随着含水量的增加,土的含盐量越高,土的粘聚力减小越明显。易溶盐在土中的状态形式是影响其抗剪强度参数变化的一个重要原因。     

Low multipath antennas for GNSS-based attitude determination systems applied to high-altitude platforms

High-altitude platforms (HAPs) are a flexible and attractive technology for providing innovative wireless services. These aerial platforms can be successfully employed for mobile or broadband communications and for disaster monitoring or response. However, one of the open issues is whether HAP stations can provide reliable services without temporal outages owing to stratospheric winds that can cause positional and attitude instabilities thus affecting the communication system operation. To counteract this issue, one possible solution is to use reconfigurable antennas whose pointing direction can be adjusted depending on the platform spatial orientation. However, this would require real-time three-axial attitude data. As a possible solution, this paper will review the potential of GNSS-based attitude determination systems with reference to HAP stations. In particular, it will be shown how the use of a particular class of low multipath and lightweight antennas can provide a high degree of accuracy without altering the avionic ballast.     

基于不同GCP数量和获取方法的数字正射影像的制作与评定

SPOT-5影像的高分辨率和高信息量的性质,使其得到了广泛的应用,特别是在全国第二次土地利用调查中得到了更加深入的应用。而数字正射影像的制作是SPOT-5遥感影像应用的关键所在。本文在介绍DOM制作的基础上,依据当前获取GCP主要的三种途径采用ERDAS遥感图像处理软件进行了实验,并对最终的结果精度进行分析,总结了DOM制作过程的相关问题。