Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.     

Rb2Ca[B4O5(OH)4]2·8H2O溶解及相转化过程的研究

利用IR光谱和Raman光谱等实验手段,对25℃时Rb2Ca[B4O5(OH)4]2·8H2O的溶解及相转化过程进行了初步探索,结果表明,Rb2Ca[B4O5(OH)4]2·8H2O溶于水后,硼在溶液中主要以B(OH)3和[B(OH)4]-的形式存在,残留固相由开始的无定形水合三硼酸钙,最终部分转变为Ca2[B3O3(OH)5]2·8H2O晶体。     

锂光卤石X-ray衍射标准图谱

盐湖卤水提锂过程中需了解与掌握锂元素结晶析出与赋存状态,锂光卤石(LiCl·MgCl_2·7H_2O)作为重要的中间产物,其结构与种类均需鉴别,但由于缺乏锂光卤石的X-ray衍射标准图谱,使得常见的Xray衍射方法无法应用。利用相图原理,通过湿固相法制备高纯锂光卤石,然后对其进行X-ray衍射分析,从而提供锂光卤石X-ray衍射的标准图谱,为高镁锂比盐湖卤水提锂过程分析提供可靠的理论支撑。     

模式内部变率引起的1.5℃和2℃升温阈值出现时间模拟的不确定性研究

模式内部变率是模拟结果不确定性的重要来源,然而它对于1.5℃和2℃升温阈值出现时间不确定性的影响尚不清楚。因此,基于耦合模式比较计划第五阶段(CMIP5)的多模式数据研究了模式内部变率对1.5℃和2℃升温阈值出现时间不确定性的影响以及对未来排放情景的敏感性。结果表明,模式内部变率对升温阈值出现时间模拟的影响与外强迫的影响相当,单个模式内部不同成员达到全球平均1.5℃或2℃增温的年份相差2~12年;其影响具有明显的空间差异,影响极大值出现在欧亚大陆以北洋面、白令海峡周围区域、北美东北部及其与格陵兰岛之间的海域、南半球高纬地区等;低排放情景下模式内部变率的影响大于高排放情景。     

兰州台FSQ自记水管倾斜仪与CZB-1型竖直摆倾斜仪的对比分析

将兰州台的FSQ与CZB-1仪的观测资料质量、变化趋势、潮汐响应函数及映震能力进行了对比分析,认为:FSQ的观测资料的质量比CZB-1要好,因CZB-1的资料存在漂移现象;在潮汐因子和相位滞后方面,FSQ比CZB-1反应灵敏;但CZB-1的映震能力比FSQ强。     

柴达木低品位固体钾矿溶解转化率与品位关系

我国是缺钾大国,探明的可溶性钾盐十分有限,柴达木盆地是我国盐湖钾盐的聚集地,含水层骨架中含有数亿吨低品位固体钾矿,开发出这些低品位固体钾盐对增加国内钾肥供给,保障粮食安全具有重大意义。青海盐湖工业股份有限公司历经十年开发出低品位固体钾盐的浸泡式溶解转化方法,试验表明,固体钾盐的溶解转化率随固体钾品位的增加而增加,累计溶解转化率为56%～98%。该技术在柴达木多个盐湖得到推广应用,察尔汗盐湖保有固体钾盐达2.96×10~8 t,平均品位KCl为1.24%,根据试验数据回归分析溶解转化率77%,可溶解转化出钾盐(KCl)约2.28×10~8 t,柴达木盆地盐湖保有3.43×10~8 t固体钾盐,平均品位KCl为1.25%,溶解转化率78%,可溶解转化出钾盐(KCl)2.68×10~8 t,大幅度增加了钾盐储备量。     

利用光变曲线估计猎鹰九号火箭末级的旋转状态研究

光度观测是地基观测空间目标的主要手段之一,利用光度信息能够估计空间目标的相关特征信息.为了更好地了解空间目标的旋转状态,选取具有代表性的猎鹰九号火箭末级作为研究对象,由其光变信息研究旋转状态.首先利用云南天文台1.2 m光学望远镜获取猎鹰九号火箭末级的光度数据,再对目标星等进行斜距归一化,得到目标光变信息并分析目标星等...     

基于经验模式分解的太阳南北半球黑子面积的Rieger-type周期相位分析

采用经验模式分解技术研究了从第12到第24太阳活动周黑子面积数据中的Rieger-type周期,以及它们在南北半球上的相位关系。研究发现:(1)Rieger-type周期尺度以及时间尺度在两个半球上是不一样的,从而导致了半球分布的不对称性;(2)平均Rieger-type周期在北半球上的周期长度略大于南半球上的;(3)占主导地位半球的Rieger-type周期的相位不一定是超前的,半球Rieger-type周期尺度相近的也并不一定是相关性强的。     

基于SRTM DEM的InSAR高分辨率山区地表高程重建算法

山体的叠掩和阴影现象造成的信号去相关,一直是InSAR重建山区地表高程的瓶颈之一.为此,提出了一种新的基于粗分辨率SRTM DEM(约90m分辨率)辅助InSAR数据重建山区地表高程的方法.利用SRTM DEM模拟的干涉相位,对ERS-1/2干涉相位做去地形相位处理,得到残余相位.通过对解缠后的残余相位计算方差提取叠掩和阴影区域的噪声,并用平均相位近似恢复噪声区域的相位,然后将其转换为高程,并用SRTM DEM作高程补偿处理,从而实现地表高程重建.最后,定量比较了该方法与传统InSAR技术生成的DEM精度.实验表明,这种方法能有效提高传统InSAR技术生成地表高程的精度,这对提高星载雷达数据的使用效率具有重要意义.     

The phase difference effects on 3-D structure of wave pressure acting on a composite breakwater

In designing the coastal structures, the accurate estimation of the wave forces on them is of great importance. In this paper, the influences of the phase difference on wave pressure acting on a composite breakwater installed in the three-dimensional (3-D) wave field are studied numerically. We extend the earlier model [Hur, D.S., Mizutani, N., 2003. Coastal Engineering 47, 329–345] to simulate 3-D wave fields by introducing 3-D Navier–Stokes solver with the Smagorinsky's sub-grid scale (SGS) model. For the validation of the model, the wave field around a 3-D asymmetrical structure installed on a submerged breakwater, in which the complex wave deformations generate, is simulated, and the numerical solutions are compared to the experimental data reported by Hur, Mizutani, Kim [2004. Coastal Engineering (51, 407–420)]. The model is then adopted to investigate 3-D characteristics of wave pressure and force on a caisson of composite breakwater, and the numerical solutions were discussed with respect to the phase difference between harbor and seaward sides induced by the transmitted wave through the rubble mound or the diffraction. The numerical results reveal that wave forces acting on the composite breakwater are significantly different at each cross-section under influence of wave diffraction that is important parameter on 3-D wave interaction with coastal structures.