Application of Dynamic Subgrid-scale Models for Large-eddy Simulation of the Daytime Convective Boundary Layer over Heterogeneous Surfaces

The sensitivity of large-eddy simulation (LES) to the representation of subgrid-scale (SGS) processes is explored for the case of the convective boundary layer (CBL) developing over surfaces with varying degrees of spatial heterogeneity. Three representations of SGS processes are explored: the traditional constant Smagorinsky–Lilly model and two other dynamic models with Lagrangian averaging approaches to calculate the Smagorinsky coefficient (C _S ) and SGS Prandtl number (Pr). With initial data based roughly on the observed meteorology, simulations of daytime CBL growth are performed over surfaces with characteristics (i.e. fluxes and roughness) ranging from homogeneous, to striped heterogeneity, to a realistic representation of heterogeneity as derived from a recent field study. In both idealized tests and the realistic case, SGS sensitivities are mostly manifest near the surface and entrainment zone. However, unlike simulations over complex domains or under neutral or stable conditions, these differences for the CBL simulation, where large eddies dominate, are not significant enough to distinguish the performance of the different SGS models, irrespective of surface heterogeneity.     

基于能量原理的Park & Ang损伤模型简化计算方法

Park＆Ang损伤模型综合考虑了结构最大变形和累积滞回耗能的耦合作用,具有一定的先进性,被国内外研究者广泛采用;但由于该模型中参数的计算困难,尤其涉及结构滞回耗能的计算问题时,该模型的应用受到了一定的限制;文中从能量的关系入手,寻找出结构滞回耗能与结构最大位移的关系,利用该关系可方便求解出结构的滞回耗能,从而为该模型的计算提供了一种简便方法;最后,例题分析证明本文的方法简便可行,计算效率高。     

基于"山西2015速度模型"的定位方法对比研究

为了确定山西台网基于“山西2015速度模型”的相对固定的定位方法,选择2010~2016年最大空隙角小于45°、参与定位台站数大于40的103个地震事件,分别采用单纯形法、Hypo2000、Hyposat结合PTD等3种方法重新测定。结果显示,单纯形法和Hyposat结合PTD测定的残差以及网缘地震的震中距两方面均优于Hypo2000;在震源深度方面,Hyposat结合PTD的结果较为可信。综合分析认为,基于“山西2015速度模型”定位地震时,山西台网应固定使用Hyposat结合PTD的方法。     

An examination of the validation of a model of the hydro/thermo/mechanical behaviour of engineered clay barriers

This paper focuses attention on the development of a numerical model of the hydro/thermo/mechanical behaviour of unsaturated clay and its consequent verification and validation. The work presented describes on-going collaboration between the Cardiff School of Engineering and Atomic Energy of Canada. The model development, which was carried out at Cardiff, can be described as being based on a mechanistic approach to coupled heat, moisture and air flow. This is then linked to a deformation analysis of the material within a ‘consolidation’ type of model. The whole is solved via the finite element method to yield a computer software code named COMPASS (COde for Modelling PArtly Saturated Soil). Some aspects of verification and validation of the model have been addressed in-house. However, the purpose of current AECL work is to provide an independent, rigorous, structured programme of validation and the paper will also explore the further validation of COMPASS within this context. © 1998 by John Wiley & Sons, Ltd.     

近四年来我国气候数值模拟与预报研究的进展

近年来，我国在气候问题中的数值模拟式研究方面有了相当大的发展。这主要表现在气候模式水平的迅速提高，以及利用气候模式进行了大量的气候数值模拟和预报试验研究工作。对我国１９９１￣１９９４年在这方面的主要研究进展进行了系统的总结。     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.     

视频对象分割及跟踪方法研究

讨论和分析了视频对象全自动提取及后续帧中的跟踪过程及采用的方法,对其算法、分割性能和结果进行了比较和评述。并结合Hausdorff和Snake跟踪器,对初始对象轮廓进行跟踪。结果证明,这种跟踪方法能有效地解决对象被遮挡和形变以及背景移动的问题。     

三维地质模型在泰安市地下空间开发中的应用

在城市化进程不断加快的今天,城市地下空间开发利用已经成为提高城市容量、缓解交通、改善环境的重要手段。为全面深化对泰安城市地下空间的认识,有效挖掘城市后备空间资源的巨大潜力,通过综合集成钻孔编录、地质图件和数字地形图等多源地学数据,借助MapGIS三维地质建模软件,初步建立起泰安城市三维地质模型,以直观的方式表达工程岩土体空间分布等地质信息,为更好地保护利用泰安市地下空间提供地质依据。     

一个湍能封闭模型对风暴潮海底底应力的应用研究

将一个三维湍能封闭模型应用于开阔海区的风暴潮，通过数值计算探讨了Ｔａｙｌｏｒ底摩擦二次率的拖曳系数随空间的分布及拖曳系数与水深、海底粗糙度、风向和风速等因素的关系。本文对底摩擦二次率的可靠性做了评价。     

红板岩材料隐式本构模型的建立及其应用研究

针对红板岩材料在岩土工程中所表现的大量模糊的和不确定的因素等特点,基于人工神经网络的学习能力,借助于室内岩石力学试验,进行了对该材料的力学本构特性进行了神经网络模拟研究,提出了隐式本构模型的思想和方法,并通过该方法对该岩石的流变试验结果进行学习,获得了以网络权值结构保存的力学特性知识,由此得到了表征红板岩应力应变本构关系的隐式本构模型。应用结果表明,该方法对岩土类材料本构关系的模拟研究具有很好的应用前景。