基于GIS的城镇土地定级信息系统建模方法探讨

基于GIS的城镇土地定级信息系统在建设过程中,定级方法确定、定级单元大小确定和定级因素/子权重值的生成是关键,且三者都具有不同的确定方法,因此选择什么样的方法决定了系统建立的优劣。本文着重归纳、总结了城镇土地定级信息系统定级方法,通过对比分析,探讨了最优定级方法、最优网格单元大小划分方法和最优因素/子权重值计算方法。     

Capture-zone design in an aquifer influenced by cyclic fluctuations in hydraulic gradients

Design of a groundwater pumping and treatment system for a wood-treatment facility adjacent to the tidally influenced Fraser River estuary required the development of methodologies to account for cyclic variations in hydraulic gradients. Design of such systems must consider the effects of these cyclic fluctuations on the capture of dissolved-phase contaminants. When the period of the cyclic fluctuation is much less than the travel time of the dissolved contaminant from the source to the discharge point, the hydraulic-gradient variations resulting from these cycles can be ignored. Capture zones are then designed based on the average hydraulic gradient determined using filter techniques on continuous groundwater-level measurements. When the period of cyclic fluctuation in hydraulic gradient is near to or greater than the contaminant travel time, the resulting hydraulic-gradient variations cannot be ignored. In these instances, procedures are developed to account for these fluctuations in the capture-zone design. These include proper characterization of the groundwater regime, assessment of the average travel time and period of the cyclic fluctuations, and numerical techniques which allow accounting for the cyclic fluctuations in the design of the capture zone. Electronic Publication     

Modeling of the Guagua Pichincha volcano (Ecuador) lahars

Lahars, here defined as debris flows of volcanic origin, are rapid mass movements that pose a serious threat to cities located in the vicinity of many volcanoes. Quito, capital city of Ecuador and placed at the foot of the Pichincha volcano complex, is exposed to serious inundation hazard as part of the city is built on numerous deposits of large lahars that have occurred in the last 10,000 years.The objective of this paper is to model the potential lahars of the Pichincha volcano to predict inundation areas within the city of Quito. For this purpose two models that apply different approaches were utilized and their results were compared.The programs used were LAHARZ, a semi-empirical model conceived by the United States Geological Survey (USGS), and FLO-2D, a hydraulic model distributed by FLO Software Inc. LAHARZ is designed as a rapid, objective and reproducible automated method for mapping areas of potential lahar inundation (Proc. First Int. Conf. on Debris Flow Hazards Mitigation, San Francisco, USA, ASCE, 1998, p. 176). FLO-2D is a two-dimensional flood routing model for simulating overland flow on complex surfaces such as floodplains, alluvial fans or urbanized areas (FLO-2D Users manual, version 99.2). Both models run within geographical information systems (GIS).Fieldwork was focused on collecting all available information involved in lahar modeling. A total of 49 channel cross-sections were measured along the two main streams and stratigraphic investigations were carried out on the fans to estimate the volume of previous events. A global positioning system was utilized to determine the coordinates of each cross-section. Further data collection concerned topography, rainfall characteristics and ashfall thicknesses. All fieldwork was carried out in cooperation with the Instituto Geofisico of the Escuela Politecnica Nacional.Modeling in a GIS environment greatly aided the exportation of results for the creation of thematic maps and facilitated model comparison. Evaluation of the models was performed by comparing simulation results against each other and against the geometry of existing lahar deposits.     

高放废物处置库选址中低渗透介质地质研究的几个问题

低渗透介质是阻碍有害物质在地下迁移良好的天然屏障, 因此成为高放废物处置库围岩类型的首选。本文通过对高放废物处置库选址中地质研究的回顾, 阐述了低渗透介质地质研究的特点, 对地质参数测定、取样、水流模拟、地球化学模拟进行了重点介绍。     

Local Modeling模式及其在月径流预测中的应用

Local Modeling方法是一种动力系统预测方法，将其应用于河西内陆区黑河干流出山口莺落峡水文站月平均流量的中长期预测预报，取得了较为理想的成果。预测试验的结果表明，该预测模型有较高计算精度，尤其适用于非主汛期各月的月平均流量的预测；对于主汛期6～9月的月平均流量的预测，在考虑前期来水与预见期内降水的影响后，亦可获到较为理想的预测结果。可以认为，该方法的预报精度达到了水文情报预报规范的要求，Local Modeling方法的应用，将为西北干旱地区河川径流的中长期预报提供了一个新的途径。     

OPA 90's impact at reducing oil spills

OPA 90 set out stringent requirements and liabilities for tankers operating in US national waters. OPA 90 was in response to the public concern caused by the grounding of the Exxon Valdez in 1989. It made ship owners responsible for the cost of pollution incidents and required all tank ships/barges operating in US waters have double hulls by 2015. We model factors influencing oil spills and test whether OPA 90 helped reduce the number of those spills. After accounting for causal factors, both increased liability and double hulls were statistically significant factors in reducing the number of spills.     

Dimethylsulfide production in Sargasso Sea eddies

Lagrangian time series of dimethylsulfide (DMS) concentrations from a cyclonic and an anticyclonic eddy in the Sargasso Sea were used in conjunction with measured DMS loss rates and a model of vertical mixing to estimate gross DMS production in the upper 60 m during summer 2004. Loss terms included biological consumption, photolysis, and ventilation to the atmosphere. The time- and depth (0–60 m)-averaged gross DMS production was estimated to be 0.73±0.09 nM d⁻¹ in the cyclonic eddy and 0.90±0.15 nM d⁻¹ in the anticyclonic eddy, with respective DMS replacement times of 5±1 and 6±1 d. The higher estimated rate of gross production and lower measured loss rate constants in the anticyclonic eddy were equally responsible for this eddy's 50% higher DMS inventory (0–60 m). When normalized to chlorophyll and total dimethylsulfoniopropionate (DMSP), estimated gross production in the anticyclonic eddy was about twice that in the cyclonic eddy, consistent with the greater fraction of phytoplankton that were DMSP producers in the anticyclonic eddy. Higher rates of gross production were estimated below the mixed layer, contributing to the subsurface DMS maximum found in both eddies. In both eddies, gas exchange, microbial consumption, and photolysis were roughly equal DMS loss terms in the surface mixed layer (0.2–0.4 nM d⁻¹). Vertical mixing was a substantial source of DMS to the surface mixed layer in both eddies (0.2–0.3 nM d⁻¹) owing to the relatively high DMS concentrations below the mixed layer. Estimated net biological DMS production rates (gross production minus microbial consumption) in the mixed layer were substantially lower (by almost a factor of 3) than those estimated in a previous study of the Sargasso Sea, which may explain the relatively low mixed-layer DMS concentrations found here during July 2004 (3 nM) compared to previous summers (4–6 nM).     

Approach to modeling and virtual-reality-based simulation for plant canopy lighting

Over the past 20 years, significant progress has been made in virtual plant modeling corresponding to the rapid advances in information technology. Virtual plant research has broad applications in agronomy, forestry, ecology and remote sensing. As many biological processes are driven by light, it is the key for virtual plant to estimate the light absorbed by each organ. This paper presents the radiance equation suitable for calculating sun and sky light intercepted by plant organs based on the principles of the interaction between light and plant canopy firstly; analyzes the process principles of plant canopy primary lighting based on ray casting and projection secondly; describes the multiple scattering of plant lighting based on Monte Carlo ray tracing method and on the radiosity method thirdly; and confirms the research with 3D visualization based on Virtual Reality Modeling Language （VRML） finally. The research is the primary work of digital agriculture, and important for monitoring and estimating corn growth in Northeast China.     

多桩段工程边坡3维建模方法研究

使用多桩段边坡的角点数据插值生成边坡场景的地形数据,运用OpenGL的自动化技术实现了多桩段边坡的3维建模。使用分块纹理映射的方法,克服了OpenGL渲染机对影像纹理大小的限制。应用低分辨率纹理映射和选择边坡增强纹理分辨率的映射的方法实现了场景的快速建立和漫游,解决了对多桩段边坡的大场景渲染效率与分析时需要的视觉效果的冲突问题。研究成果能够被用于实际工程中,为边坡的辅助设计提供了支持。     

Photobleaching of chromophoric dissolved organic matter in natural waters: kinetics and modeling

The effects of monochromatic and polychromatic UV and visible (VIS) radiation on the optical properties (absorption and fluorescence) of chromophoric dissolved organic matter (CDOM) were examined for a Suwannee River fulvic acid (SRFA) standard and for water from the Delaware and Chesapeake Bays. The primary (direct) loss of absorption and fluorescence occurred at the irradiation wavelength(s), with smaller secondary (indirect) losses occurring outside the irradiation wavelength(s). The efficiency of both direct and indirect photobleaching decreased monotonically with increasing wavelength. Exposure to polychromatic light increased the CDOM absorption spectral slope (S), consistent with previous field measurements. An analysis of the monochromatic photobleaching kinetics argues that a model based on a simple superposition of multiple chromophores undergoing independent photobleaching cannot apply; this conclusion further implies that the absorption spectrum of CDOM cannot arise solely from a simple superposition of the spectra of numerous independent chromophores. The kinetics of CDOM absorption loss with the monochromatic irradiation were employed to create a simple, heuristic model of photobleaching. This model allowed us to examine the importance of the indirect photobleaching losses in determining the overall photobleaching rates as well as to model the photobleaching of natural waters under polychromatic light fields. Application of this model to natural waters closely predicted the change in the CDOM spectral shape caused by photodegradation. The time scale of this process was consistent with field observations acquired during the summertime for coastal waters in the Middle Atlantic Bight (MAB). The results indicate that the ratio of the photodegradation depth to the mixed layer depth is a key parameter controlling the rate of the photobleaching in surface waters.