利用正交本征模态函数分析日长变化的主要激发源

利用本征模态函数的正交分解方法对日长(LOD,length of day)数据序列进行分解,得到了日长变化的101个正交本征模态函数.通过对其中几个主要模态函数进行分析,发现日月地的相对位置与其中几个模态函数极值发生的时间极其吻合,并据此推断出日长变化的主要激发源.同时还发现日长变化存在准周期约为206 d的波动.     

引水工程复杂水流的二、三维嵌套数值模拟

建立宽浅河道与管道水流的二、三维嵌套的数学模型,对基本的控制方程、方程的数值离散格式和求解方法、嵌套连接和初始边界条件等问题进行研究.利用上述方法对某工程实例进行计算,在宽广水域上给出了水力要素的平面分布,在复杂边界强三维流动的计算区域得到其三维运动特性.计算结果与实验资料进行了比较,两者吻合较好,说明嵌套连接的二、三维数学模型是解决某些实际工程问题的一种可靠的和有效的工具.     

基于NS2的TCPW性能改进算法研究

TCP Westwood(TCPW)和Vegas都是基于测量的TCP New-Reno增强算法。TCPW针对ACK流直接估算可用带宽,在慢启动和线性递增部分依然采用传统Reno的盲目递增的机制,导致发送端较为频繁的重传。对这几种算法原理进行分析阐述,并提出1种改进方法,更精确的测量估计带宽,通过网络仿真工具NS2进行验证,明显去除TCP全局同步现象,增强网络性能。     

高频电力线信息传输的电机模型与仿真

研究在电机驱动系统中,电力线通信的建模问题,着重讨论在高频时电机输入阻抗的特性下,电机模型的建立.通过实验测量得到电机和电力线在频率100 kHz～40 MHz的输入阻抗特性曲线,并分析高频输入阻抗的谐振特点.在Matlab中,提出基于阻抗公式的分析法、最小均方值误差估计法以及最优化方法进行模型的参数识别,将得到的参数代入模型中可以得到电机的阻抗模型.电机模型的精确度可以通过仿真曲线和测量曲线的逼近程度看出,从结果看仿真得到的阻抗曲线跟实际测量的阻抗曲线走向基本一致.     

Approach to modeling and virtual-reality-based simulation for plant canopy lighting

Over the past 20 years, significant progress has been made in virtual plant modeling corresponding to the rapid advances in information technology. Virtual plant research has broad applications in agronomy, forestry, ecology and remote sensing. As many biological processes are driven by light, it is the key for virtual plant to estimate the light absorbed by each organ. This paper presents the radiance equation suitable for calculating sun and sky light intercepted by plant organs based on the principles of the interaction between light and plant canopy firstly; analyzes the process principles of plant canopy primary lighting based on ray casting and projection secondly; describes the multiple scattering of plant lighting based on Monte Carlo ray tracing method and on the radiosity method thirdly; and confirms the research with 3D visualization based on Virtual Reality Modeling Language （VRML） finally. The research is the primary work of digital agriculture, and important for monitoring and estimating corn growth in Northeast China.     

A coupled ice-ocean ecosystem model for 1-D and 3-D applications in the Bering and Chukchi Seas

Primary production in the Bering and Chukchi Seas is strongly influenced by the annual cycle of sea ice. Here pelagic and sea ice algal ecosystems coexist and interact with each other. Ecosystem modeling of sea ice associated phytoplankton blooms has been understudied compared to open water ecosystem model applications. This study introduces a general coupled ice-ocean ecosystem model with equations and parameters for 1-D and 3-D applications that is based on 1-D coupled ice-ocean ecosystem model development in the landfast ice in the Chukchi Sea and marginal ice zone of Bering Sea. The biological model includes both pelagic and sea ice algal habitats with 10 compartments： three phytoplankton （pelagic diatom, flagellates and ice algae： D, F, and Ai） , three zooplankton （copepods, large zooplankton, and microzooplankton ： ZS, ZL, ZP） , three nutrients （ nitrate ＋ nitrite, ammonium, silicon ： NO3 , NH4, Si） and detritus （Det）. The coupling of the biological models with physical ocean models is straightforward with just the addition of the advection and diffusion terms to the ecosystem model. The coupling with a multi-category sea ice model requires the same calculation of the sea ice ecosystem model in each ice thickness category and the redistribution between categories caused by both dynamic and thermodynamic forcing as in the physical model. Phytoplankton and ice algal self-shading effect is the sole feedback from the ecosystem model to the physical model.     

Results of recent Pacific-Arctic ice-ocean modeling studies at the Naval Postgraduate School

Summary of results from a high - resolution pan - Arctic ice - ocean model are presented for the northern North Pacific, Bering, Chukchi, and Beaufort seas. The main focus is on the mean circulation, communication from the Gulf of Alaska across the Bering Sea into the western Arctic Ocean and on mesoscale eddy activity within several important ecosystems. Model results from 1979 -2004 are compared to observations whenever possible. The high spatial model resolution at 1/12o （or -9 - km） in the horizontal and 45 levels in the vertical direction allows for representation of eddies with diameters as small as 36 km. However, we believe that upcoming new model integrations at even higher resolution will allow us to resolve even smaller eddies. This is especially important at the highest latitudes where the Rossby radius of deformation is as small as 10 km or less.     

Numerical simulation research on multi-electrodes resistivity imaging survey array

Multi-electrodes Resistivity Imaging Survey （MRIS） is an array method of electrical survey. In practice how to choose a reasonable array is the key to get reliable survey results. Based on four methods of MRIS such as Wenner, Schlumberger, Pole-pole and Dipole-dipole the authors established the model, by studying the result of the forward numerical simulation modeling and inverse modeling, and analyzed the differences among the different forms of detection devices.     

基于J2ME的像素级扩展图形旋转算法的研究与实现

主要研究现有大多数平台下多图像旋转的处理,分析其中的不足之处,总结以往对图像处理方面的资料,分析得出了对图像旋转处理进行二次开发的可行,最终设计实现了一种利用三角函数对图像进行像素级旋转处理,来实现对图像的任意角度的旋转。     

一种基于可扩展编码的P2P网络视频仿真系统的设计与实现

可扩展编码从编码入手解决网络带宽自适应问题,同时一定程度上增强了视频流的抗误码性。在opnet仿真平台上搭建了基于可扩展编码的P2P网络视频仿真系统,对仿真系统中的资源发现型机制和流媒体的传输机制做了详细的阐述,并具体描述了仿真系统的搭建过程,最后给出了仿真分析和测试结果。