Planetary microlensing signals from the orbital motion of the source star around the common barycentre

With several detections, the technique of gravitational microlensing has proven useful for studying planets that orbit stars at Galactic distances, and it can even be applied to detect planets in neighbouring galaxies. So far, planet detections by microlensing have been considered to result from a change in the bending of light and the resulting magnification caused by a planet around the foreground lens star. However, in complete analogy to the annual parallax effect caused by the revolution of the Earth around the Sun, the motion of the source star around the common barycentre with an orbiting planet can also lead to observable deviations in microlensing light curves that can provide evidence for the unseen companion. We discuss this effect in some detail and study the prospects of microlensing observations for revealing planets through this alternative detection channel. Given that small distances between lens and source star are favoured, and that the effect becomes nearly independent of the source distance, planets would remain detectable even if their host star is located outside the Milky Way with a sufficiently good photometry (exceeding present-day technology) being possible. From synthetic light curves arising from a Monte Carlo simulation, we find that the chances for such detections are not overwhelming and appear practically limited to the most massive planets (at least with current observational set-ups), but they are large enough for leaving the possibility that one or the other signal has already been observed. However, it may remain undetermined whether the planet actually orbits the source star or rather the lens star, which leaves us with an ambiguity not only with respect to its location, but also to its properties.     

Hall equilibrium of thin Keplerian discs embedded in mixed poloidal and toroidal magnetic fields

Axisymmetric steady-state weakly ionized Hall–magnetohydrodynamic (MHD) Keplerian thin discs are investigated by using asymptotic expansions in the small disc aspect ratio ε. The model incorporates the azimuthal and poloidal components of the magnetic fields in the leading order in ε. The disc structure is described by an appropriate Grad–Shafranov equation for the poloidal flux function ψ that involves two arbitrary functions of ψ for the toroidal and poloidal currents. The flux function is symmetric about the mid-plane and satisfies certain boundary conditions at the near-horizontal disc edges. The boundary conditions model the combined effect of the primordial as well as the dipole-like magnetic fields. An analytical solution for the Hall equilibrium is achieved by further expanding the relevant equations in an additional small parameter δ that is inversely proportional to the Hall parameter. It is thus found that the Hall equilibrium discs fall into two types: Keplerian discs with (i) small  ( R _d∼δ⁰)  and (ii) large  ( R _d≳δ^{− k} , k > 0)  radius of the disc. The numerical examples that are presented demonstrate the richness and great variety of magnetic and density configurations that may be achieved under the Hall–MHD equilibrium.     

Diurnal thermal tides in a non-synchronized hot Jupiter

We perform a linear analysis to investigate the dynamical response of a non-synchronized hot Jupiter to stellar irradiation. In this work, we consider the diurnal Fourier harmonic of the stellar irradiation acting at the top of a radiative layer of a hot Jupiter with no clouds and winds. In the absence of the Coriolis force, the diurnal thermal forcing can excite internal waves propagating into the planet's interior when the thermal forcing period is longer than the sound crossing time of the planet's surface. When the Coriolis effect is taken into consideration, the latitude-dependent stellar heating can excite weak internal waves (g modes) and/or strong baroclinic Rossby waves (buoyant r modes) depending on the asynchrony of the planet. When the planet spins faster than its orbital motion (i.e. retrograde thermal forcing), these waves carry negative angular momentum and are damped by radiative loss as they propagate downwards from the upper layer of the radiative zone. As a result, angular momentum is transferred from the lower layer of the radiative zone to the upper layer and generates a vertical shear. We estimate the resulting internal torques for different rotation periods based on the parameters of HD 209458b.     

On the habitability of the OGLE-2006-BLG-109L planetary system

We investigate the dynamics of putative Earth-mass planets in the habitable zone (HZ) of the extrasolar planetary system OGLE-2006-BLG-109L, a close analogue of the Solar system. Our work is inspired by the work of Malhotra & Minton. Using the linear Laplace–Lagrange theory, they identified a strong secular resonance that may excite large eccentricity of orbits in the HZ. However, due to uncertain or unconstrained orbital parameters, the subsystem of Jupiters may be found in a dynamically active region of the phase space spanned by low-order mean-motion resonances. To generalize this secular model, we construct a semi-analytical averaging method in terms of the restricted problem. The secular orbits of large planets are approximated by numerically averaged osculating elements. They are used to calculate the mean orbits of terrestrial planets by means of a high-order analytic secular theory developed in our previous works. We found regions in the parameter space of the problem in which stable, quasi-circular orbits in the HZ are permitted. The excitation of eccentricity in the HZ strongly depends on the apsidal angle of jovian orbits. For some combinations of that angle, eccentricities and semimajor axes consistent with the observations, a terrestrial planet may survive in low eccentric orbits. We also study the effect of post-Newtonian gravity correction on the innermost secular resonance.     

Dust formation and evolution in a Ca–Fe–SiO–H2–O2 vapour phase condensation experiment and astronomical implications

Here, we report on a kinetically controlled vapour phase condensation experiment using a low-calcium Ca–Fe–SiO–H₂–O₂ vapour. Under these conditions of extreme disequilibrium, the condensate properties become predictable. They are amorphous solids with (predictable) deep metastable eutectic compositions. This study also shows how chemical evolution of the condensate grains will lead to chemically complex amorphous solids. The highly disordered structure of the deep metastable eutectic condensates is the very key to this predictable chemical evolution to grains with a silicate mineral composition, yet being amorphous. We compare our results with astronomical observations of dust around young stellar objects.     

The vertical structure of planet-induced gaps in protoplanetary discs

Giant planets embedded in circumstellar discs are expected to open gaps in these discs. We examine the vertical structure of the gap edges. We find that the planet excites spiral arms with significant (Mach number of a half) vertical motion of the gas, and discuss the implications of these motions. In particular, the spiral arms will make the edge appear 'puffed up' relative to the bulk of the disc. Infrared observations (sensitive to dust) would be dominated by the light from the thick inner edge of the disc. Submillimetre observations (sensitive to gas velocities) would appear to be hot in 'turbulent' motions (actually the ordered motion caused by the passage of the spiral arms), but cold in chemistry. Resolved submillimetre maps of circumstellar discs might even be able to detect the spiral arms directly.     

Periastron precession measurements in transiting extrasolar planetary systems at the level of general relativity

Transiting exoplanetary systems are surpassingly important among the planetary systems since they provide the widest spectrum of information for both the planet and the host star. If a transiting planet is on an eccentric orbit, the duration of transits T _D is sensitive to the orientation of the orbital ellipse relative to the line of sight. The precession of the orbit results in a systematic variation in both the duration of individual transit events and the observed period between successive transits,   P _obs  . The periastron of the ellipse slowly precesses due to general relativity and possibly the presence of other planets in the system. This secular precession can be detected through the long-term change in   P _obs  (transit timing variations, TTV) or in T _D (transit duration variations, TDV). We estimate the corresponding precession measurement precision for repeated future observations of the known eccentric transiting exoplanetary systems (XO-3b, HD 147506b, GJ 436b and HD 17156b) using existing or planned space-borne instruments. The TDV measurement improves the precession detection sensitivity by orders of magnitude over the TTV measurement. We find that TDV measurements over a approximately 4 yr period can typically detect the precession rate to a precision well exceeding the level predicted by general relativity.     

Ecosystem services assessment and compensation costs for installing seaweed farms

In a global context of promotion and expansion of blue growth initiatives, the development of activities such as aquaculture calls for the assessment of the potential impacts on biodiversity at different levels and associated services. This paper presents an assessment of the potential impact of the installation of seaweed farms on ecosystem services and the induced compensation costs. Biophysical and socioeconomic indicators have been developed for helping decision makers to select the most suitable locations. The approach considers a multi-criteria approach based on Geographical Information Systems (GIS) and Habitat Equivalency Analysis (HEA). The former is used to obtain biophysical ecosystem services and socioeconomic indicators and the latter to evaluate the costs required to compensate the loss of cultural and provisioning ecosystem services. A case-study in the Normand-Breton (Saint Malo) Gulf, France, illustrates this method through the analysis of hypothetical locations of seaweed farms. Results highlight the differences between alternative locations regarding biophysical constraints (in terms of distance and depth), potential risks of conflicts with existing uses, impacts on habitats and the ecosystem services delivered, and compensation costs. This case-study illustrates the flexibility of this approach which can be further adapted to include other indicators in order to deliver integrated information to coastal planners.     

基于球面退化四叉树格网的GlobeLand30数据表达及精度分析

Globe Land30为我国研制的世界上首套全球30 m地表覆盖数据集。该数据采用传统的通用横轴墨卡托投影(UTM)组织数据。为了解决地图投影给全球性问题带来的空间数据断裂及几何变形等问题,本文以球面退化四叉树格网(DQG)为基础,构建一种Globe Land30的全球连续表达模型;并选择相应的精度评价指标,对基于DQG模型表达的几何变形、数据误差的空间位置分布及定量化进行研究。结果表明:基于DQG模型既能保证Globe Land30数据表达的全球连续性,又能保持原有的数据精度,为Globe Land30在全球空间数据的可视化连续表达与深度分析提供了基础。     

Rock Stress,Rock Stress Measurements,and the Integrated Stress Determination Method (ISDM)

The primary objectives of this work are to (1) improve the understanding of the prevailing stress distribution at the Äspö Hard Rock Laboratory (HRL) in SE Sweden by employing an integrated stress determination approach, and in order to accomplish this (2) extend the existing stress integration methodology denominated integrated stress determination method (ISDM; Cornet in Comprehensive Rock Engineering vol 3, Pergamon Press, Oxford, pp 413–432, 1993a). The new developments of the ISDM involve a 12-parameter representation of the regional stress field in the rock mass (i.e., the full stress tensor and its variation with depth) that is applicable to hydraulic stress data (sleeve fracturing, hydraulic fracturing, and hydraulic tests on pre-existing fractures), overcoring data (CSIR- and CSIRO-type of devices), and to combinations of hydraulic and overcoring stress data. For the latter case, the elastic parameters of the overcoring technique may be solved in situ by allowing the hydraulic stress data to constrain them. As a result, the problem then involves 14 model parameters. Results from the study show that the ISDM effectively improves the precision of the prevailing stress field determination and that it is especially powerful for identification of consistencies/inconsistencies in an existing data set. Indeed, this is the very basic premise and goal of stress integration; combine all available data to achieve as complete a characterization of the mechanical stress model as possible, and not to identify a solution that fits only loosely the maximum amount of stress data.