对地质勘查组织“产品”设计的理解

从讨论ISO 9000:2000标准“设计和开发”的定义出发,对地质勘查组织的的产品、产品质量特性和产品的设计进行了讨论,提出了地质勘查组织产品设计与标准中规定的设计和开发的概念以及对应关系,并对标准中的“设计和开发”与地质勘查组织“设计与开发”的内容进行了对比分析。     

Intraplate Deformation of Asia Derived from ITRF2000 Velocity Field

The definition of an "intraplate fixed" frame remains a significant error source for crustal motion studies at a few millimeters per year level. An appropriate implementation of such a frame is very important to avoid biased velocities and to confirm a valid geophysical interpretation. Here, we establish the newest global plate motion model of ITRF2000VEL and research the definition of an Asian-fixed frame in Asia using the ITRF2000 velocity field. By X2 and F ratio tests, we find a subset site in Asia that satisfies a rigid cap rotation with residual velocities <0. 95 mm/a and provide a stable Asia reference frame (SARF). In this reference frame, we find residual velocities at Asiatic ITRF2000 sites that are consistent with known active tectonic feature. An important result of this study is the identification of internal deformation of the order of 1-2 mm/a in an area usually interpreted as "stable" Asia. These results should be further checked as newer, denser and more accurate space geodetic data sets wit     

利用中国地壳运动观测网络研究中国大陆相对于ITRF97板块模型形变

在建立全球ITRF97板块运动模型的基础上,利用"中国地壳运动观测网络"79个GPS基本站的数据,建立我国新的地壳运动方向图和块体运动模型.通过与NNR-NUVEL1A地质模型比较认为,ITRF97板块运动模型反映了现今十几年跨度的地壳运动,在研究我国现今几年到十几年时间跨度的地壳形变时,地壳运动背景场应采用基于ITRF97实测速度场建立欧亚板块运动模型.     

Near-fault strong motion complexity of the 2000 Tottori earthquake (Japan) from a broadband source asperity model

The October 6/2000 Tottori earthquake that occurred in central Japan was an intermediate size strike-slip event that produced a very large number of near field strong motion recordings. The large amount of recorded data provides a unique opportunity for investigating a source asperity model of the Tottori earthquake that, combined with a hybrid strong motion simulation technique, is able to reproduce the observed broadband frequency near-fault ground motion.

We investigated the optimum source asperity parameters of the Tottori earthquake, by applying a Genetic Algorithm (GA) inversion scheme to optimise the fitting between simulated and observed response spectra and Peak Ground Acceleration (PGA) values. We constrained the initial model of our inversion by using the heterogeneous slip distribution obtained from a kinematic inversion of the source of previous studies. We used all the observed near-fault ground motions (−100 m) from the borehole strong motion network of Japan (KiK-Net), which are little affected by surficial geology (site effects).

The calculation of broadband frequency strong ground motion (0.1–10 Hz) is achieved by applying a hybrid technique that combines a deterministic simulation of the wave propagation for the low frequencies and a semi-stochastic modelling approach for the high frequencies. For the simulation of the high frequencies, we introduce a frequency-dependent radiation pattern model that efficiently removes the dependence of the pattern coefficient on the azimuth and take-off angle as the frequency increases. The good agreement between the observed and simulated broadband ground motions shows that our inversion procedure is successful in estimating the optimum asperity parameters of the Tottori earthquake and provides a good test for the strong ground motion simulation technique.

The ratio of background stress drop to average asperity stress drop from our inversion is nearly 50%, in agreement with the theoretical asperity model of Das and Kostrov [Das, S., Kostrov, B.V., 1986. Fracture of a single asperity on a finite fault: a model for weak earthquakes? Earthquake Source Mechanics, AGU, pp. 91–96.], and an empirical ratio of asperities to rupture area [Seismol. Res. Lett. 70 (1999) 59–80.].

The simulated radiation pattern is very complex for epicentral distances within half the fault length, but it approaches the radiation of a double-couple point source for larger distances.

The rupture velocity and rise time have a significant influence on the Peak Ground Velocity (PGV) distribution around the fault. An increase in rupture velocity produces a similar effect on the ground motion as a reduction in rise time.     

大洋海岭相对运动的测定及其分析

基于现今实测全球板块运动模型ITRF2000VEL，分别建立了相对东太平洋海岭和南北大西洋海岭的绝对板块运动模型PRF-ITRF2000VEL、SRF-ITRF2000VEL和NRF-ITRF2000VEL，由此分析了大洋海岭间的相对运动，表明大西洋海岭与东太平洋海岭以平均10．9mm/a的速度在张开，反映了大洋海岭并非固定，由此得到的绝对板块运动模型均是“相对”的绝对板块运动模型。     

PZ-90 GLONASS与ITRF之间转换参数的谱分析

根据BKG中心的转换参数结果，采用FFT方法，计算分析了PZ-90GLONASS与ITRF间转换参数及其周期变化特性，并得出了一些有益的结论。     

利用AutoCAD2000 VBA编程实现矿图符号的绘制

本文通过对AutoCAD2000VBA编程方法的剖析，探讨了利用AutoCAD2000VBA编程绘帛矿图符号的过程，为直接在AutoCAD2000图形环境下实现矿图的矢量化和辅助地质制图提供了一种技术方法。     

ITRF2000和新的全球板块运动模型

地学工作者一直关注的ITRF2000地球参考框架初步结果已于2001年3月19日公布，ITRF2000综合了VLBI、SLR，LLR，GPS和DORIS技术，产生736个点位坐标和54个核心站，文中介绍了ITRF2000，并利用ITRF2000综合解的结果计算全球板块的欧拉矢量，建立了基于空间实测数据基础 的最新全球板块运动模型。     

全球地壳运动的背景场及其研究进展

全球地壳运动是在全球地壳运动背景场中发生的，其背景场的运动参数是表征地壳运动的最基本特征。由于现今板块运动模型ITRF序列均忽略板块边界部分，并且板块以NUVEL1A模型来划分，由此建立的全球板块运动模型不能作为一个严格的全球地壳运动背景场。利用区域速度场和ITRF2000速度场建立一个包括非刚体的板块边界区域和刚体板块的全球地壳运动模型，其板块总角动量ΙLΙ＝0．131°/Ma，即不为零，存在整体旋转，由此建立无整体旋转（NNR）模型，并评述其研究进展。     

气象资料的Web方式调用

本文介绍了为遂宁民航开发的一个Web产品,该产品用Windows2000作为平台,SQ SERVER 7-0为数据库,用dveam veaver 4和Front pape开发的网页,通过它可以更方便地在intevnet网上调用和显示数据库资料.