Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

Sulfur Concentration in Geochemical Reference Materials by Solution Inductively Coupled Plasma‐Mass Spectrometry

With implications for the origin of ore deposits, redox state of the atmosphere, and effects of volcanic outgassing, understanding the sulfur cycle is vital to our investigation of Earth processes. However, the paucity of sulfur concentration measurements in silicate rocks and the lack of well‐calibrated reference materials with concentrations relevant to the rocks of interest have hindered such investigations. To aid in this endeavour, this study details a new method to determine sulfur concentration via high mass resolution solution inductively coupled plasma‐mass spectrometry (ICP‐MS). The method is based on an aqua regia leach, involving relatively rapid sample preparation and analysis, and uses small test portion masses (< 50 mg). We utilised two independently prepared standard solutions to calibrate the analyses, resulting in 4% accuracy, and applied the method to eight geochemical reference materials. Measurements were reproducible to within ~ 10%. Sulfur concentrations and isotopes of six reference materials were measured additionally by elemental analyser‐combustion‐isotope ratio mass spectrometry to independently evaluate the accuracy of the ICP‐MS method. Reference materials that yielded reproducible measurements identical to published values from other laboratories (JGb‐1, JGb‐2 and MAG‐1) are considered useful materials for the measurement of sulfur. Reference materials that varied between studies but were reproducible for a given test portion perhaps suffer from sample heterogeneity and are not recommended as sulfur reference materials.     

LA‐ICP‐MS Analysis of Small Samples: Carbonate Reference Materials and Larval Fish Otoliths

This article proposes a methodology to analyse the composition of very small carbonate samples such as larval fish otoliths. The chemical composition of otoliths, which are carbonate structures in the inner ear, is often used to explore population dynamics in fishes. Recent advances in laser ablation‐inductively coupled plasma‐mass spectrometry have suggested its potential application to this field. In this study, analyses were performed using a 193 nm ArF Resonetics LA system, coupled to an Agilent 7700X‐ICP‐MS, with the following ablation parameters: a beam diameter of 5 μm, energy of 3 mJ, 2.7 J cm^?2, laser repetition rate of 10 Hz and translation speed of 2.5 μm s^?1. NIST SRM 610 glass was used as the primary calibration material. Performing this protocol, characterisation of a USGS GP‐4 reference material was achieved with suitable precision and accuracy, but the USGS MACS‐3 reference material appeared more heterogeneous under the ablation conditions tested. Calibration was performed using two different beam diameters (5 and 11 μm). Capelin (Mallotus villosus) otoliths measuring between 10 and 20 μm in diameter were tested. Even though a smaller beam diameter and lower energy were used compared with those normally employed to analyse larger otoliths, the method was successful.     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

Geochemistry,and zircon U–Pb and molybdenite Re–Os geochronology of Jilongshan Cu–Au deposit,southeastern Hubei Province,China

The Jilongshan skarn Cu–Au deposit is located at the Jiurui ore cluster region in the southwestern part of the Middle–Lower Yangtze River valley metallogenic belt. The region is characterized by NW‐, NNW‐ and EW‐trending faults and the mineralization occurs at the contact of lower Triassic carbonate rocks and Jurassic granodiorite porphyry intrusions. The intrusives are characterized by SiO₂, K₂O, and Na₂O concentrations ranging from 61.66 to 67.8 wt.%, 3.29 to 5.65 wt.%, and 2.83 to 3.9 wt.%, respectively. Their A/CNK (A/CNK = n(Al₂O₃)/[n(CaO) + n(Na₂O) + n(K₂O)]) ratio, δEu, and δCe vary from 0.77 to 1.17, 0.86 to 1, and 0.88 to 0.96, respectively. The rocks show enrichment in light rare earth elements ((La/Yb)_N = 7.61–12.94) and large ion lithophile elements (LILE), and depletion in high field strength elements (HFSE), such as Zr, Ti. They also display a peraluminous, high‐K calc‐alkaline signature typical of intrusives associated with skarn and porphyry Cu–Au–Mo polymetallic deposits. Laser ablation inductively coupled plasma spectrometry (LA‐ICP‐MS) zircon U–Pb age indicates that the granodiorite porphyry formed at 151.75 ± 0.70 Ma. A few inherited zircons with older ages (677 ± 10 Ma, 848 ± 11 Ma, 2645 ± 38 Ma, and 3411 ± 36 Ma) suggest the existence of an Archaean basement beneath the Middle–Lower Yangtze River region. The temperature of crystallization of the porphyry estimated from zircon thermometer ranges from 744.3 °C to 751.5 °C, and 634.04 °C to 823.8 °C. Molybdenite Re–Os dating shows that the Jilongshan deposit formed at 150.79 ± 0.82 Ma. The metallogeny and magmatism are correlated to mantle–crust interaction, associated with the subduction of the Pacific Plate from the east. Copyright © 2013 John Wiley & Sons, Ltd.     

顾及城区机载LiDAR数据特征的配准算法

条带配准是点云数据处理的一个重要环节.文章介绍了经典ICP配准算法的基本原理;考虑到城区机载LiDAR数据中地物的组成、空间分布等特征,提出了一种ICP算法中对应点集的选择策略,并建立了城区机载LiDAR数据的自动配准流程.利用河南安阳试验场的真实点云数据进行配准实验,结果表明在不需要人工干预的情况下,可以很好地将条带数据拼接在一起,建立无缝点云数据.     

UTEVA树脂分离纯化珊瑚中铀、钍的改进研究

珊瑚是记录海洋环境变化信息的载体之一,测定其U/Ca比值可重建海水温度或测定Th/U同位素比值可计算年龄重建海平面高度等.准确测定珊瑚中U、Th含量及同位素比值是提取所记载的海洋环境变化信息的前提,其难点在于高Ca基体分离和痕量U、Th富集纯化.基于此,本研究拟采用UTEVA树脂改进了一步富集分离珊瑚中U、Th的前处理...     

塔中地区志留系碎屑锆石测年及其地质意义

志留系是塔里木盆地第一套砂岩储层广泛分布的沉积盖层,其沉积来源与成因对志留纪构造演化及周边造山带的研究具有重要意义。塔中地区3个志留系样品的碎屑锆石LA?ICP?MS U?Pb定年研究表明,志留系具有比较集中的二期物源年龄：南华纪中期、古元古代中期。碎屑锆石测定的年龄表明塔中志留系物源均来自前寒武纪,塔中东部源区方向的塔南隆起基底在奥陶纪已隆升成为蚀源区。大量的新元古代中期锆石年龄表明塔里木板块在新元古代时期可能与Rodinia超大陆具有相似的聚合与裂解演化史。     

Comment on: Mass Fractions of Forty‐Six Major and Trace Elements,Including Rare Earth Elements,in Sediment and Soil Reference Materials Used in Environmental Studies. Fiket et al. (2017), Geostandards and Geoanalytical Research, 41, 123–135

This paper is intended to be a constructive discussion of Fiket et al. (2017, Geostandards and Geoanalytical Research , 41 , 123–135), who dealt with the determination of major, trace and rare earth elements in several sediment and soil certified reference materials. In the present author's view, the paper by Fiket et al. (2017) suffers from a lack of reference to several publications in which somewhat similar results had already been reported. The present contribution therefore provides a comparison of previously published results with those of Fiket et al. for the CRMs soil NCS DC 77302 (GBW 07410), stream sediment NCS DC 73309 (GBW 07311), marine sediments MESS‐3 and NCS DC 75301 (GBW 07314) and estuarine sediment IAEA‐405. It is argued that this fuller consideration (a) allows critical evaluation of the quality of the results presented by Fiket et al. and (b) highlights the advantages of their work. Finally, attention is drawn to the (possible or real) problems that can arise during simultaneous determination of multiple trace elements.     

辽东半岛～2．2 Ga 岩浆事件及其地质意义

本文报道了辽东半岛古元古代胶—辽—吉活动带内辽河群变质火山岩和辽吉花岗岩的锆石LA-ICP-MS U-Pb年代学和地球化学数据。变质安山岩的锆石具典型的岩浆振荡环带结构和较高的Th/U值(0.5),锆石U-Pb年龄为(2 182±6)Ma和(2 229±22)Ma,该年龄可代表安山岩的形成年龄。辽吉花岗岩的锆石同样具有典型的岩浆振荡环带结构和较高的Th/U值(0.3),锆石U-Pb年龄为(2 199±10)Ma,代表花岗岩的侵位时代,在误差范围内与辽河群火山岩喷发时代一致,表明辽吉花岗岩并不是辽河群的基底,二者可能为同一次岩浆作用过程的产物。辽东半岛~2.2Ga岩浆事件的识别及性质,对于正确认识古元古代胶—辽—吉活动带的属性至关重要。结合前人有关辽东半岛前寒武纪岩石的研究成果,本文研究认为胶—辽—吉活动带的形成演化可能与弧-陆碰撞有关。