A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.     

京珠高速公路东西湖段软基处理数值分析

采用等效地基固结系数法,对京珠高速公路东西湖段软土地基,进行了比奥固结平面有限元分析。计算值与实测值比较接近。计算结果为选择地基处理措施和确定道面施工时间提供了依据,保证了竣工后该路段的工后沉降满足设计要求。     

确定结构基底等效输入地震动的简化方法

本文用理论和实例计算分析了土与结构间的动力相互作用。根据基底等效输入的地震动相对入射地震动的传递函数特点研究出了一种等效输入的方法，该方法比较好地反映了场地和结构的动力特性对基底等效输入的影响。为利用刚性基底假设理论来分析土-结构动力相互作用提供了一种方法。     

A Comparative Study of the Atmospheric Layers below First Lifting Condensation Level for Instantaneous Pre-Monsoon Thunderstorm Ocurence at Agartala(23°30′N,91°15′E) and Ranchi(23°14′N,85°14′E) of India

ＡＣｏｍｐａｒａｔｉｖｅＳｔｕｄｙｏｆｔｈｅＡｔｍｏｓｐｈｅｒｉｃＬａｙｅｒｓｂｅｌｏｗＦｉｒｓｔＬｉｆｔｉｎｇＣｏｎｄｅｎｓａｔｉｏｎＬｅｖｅｌｆｏｒＩｎｓｔａｎｔａｎｅｏｕｓＰｒｅ－ＭｏｎｓｏｏｎＴｈｕｎｄｅｒｓｔｏｒｍＯｃｕｒｅｎｃｅａｔＡｇａ...     

中国和日本梅雨锋区（个例）结构的比较

通过１９８２年梅雨期的个例分析，研究和比较了中国和日本梅雨我的结构。分析表明：１．梅雨锋区系统对流层上部宽广的斜压区和对流层低层较狭窄的弱斜压区共同组成；２．在两个个例中，中国剖面上锋区均呈“椅”型结构。日本剖面上，６月呈均匀倾斜结构，７月略呈“椅型”，涡度场上中国剖面为相当正压结构，日本剖面为斜压结构；３．梅雨锋区系统可民是均匀斜压区在不均匀和加热情况下结构改变结果；４．中国大陆雨区高层大量潜热     

EFFECTS OF TROPOPAUSE AND POTENTIAL VORTICITY ANOMALY ON FRONTOGENESIS*

A two-dimensional,semi-geostrophic numerical model incorporating the tropopause and stratosphere is used to investigate the effects of a positive potential vorticity anomaly and latent heat release on the frontogenetic process and the structure of the resulting frontal zone.It is demonstrated that(1) the inclusion of tropopause and stratosphere significantly changes the frontal structure only in the upper levels;(2) a clearly defined quasi-equivalent barotropic structure and a region of upward motion of finite width appear when a positive potential vorticity anomaly exists on the warm side of the maximum baroclinity in the lower troposphere,especially when it is located on the south edge of the baroclinic zone;(3) the above mentioned structure deteriorates as the frontogenesis proceeds in a dry atmosphere but can be maintained in a moist frontogenetic process with condensational heating;(4) the combination of a positive potential vorticity anomaly and the latent heat release is able to accelerate the frontogenesis significantly with the time needed to form an intense frontal zone reduced to less than 15 h.The results have significant theoretical importance in understanding the complex nature of frontal structure and frontogenesis,especially in understanding the dynamic structure of the subtropical frontal zone observed during early summer over East Asia.     

被动微波遥感估算雪水当量研究进展与展望

被动微波遥感可以透过云层，全天候地提供地表一定深度的信息。星载被动微波遥感传感器的时间分辨率很高，在冰冻圈动态研究中有着重要的地位。在最近的二三十年中，大量被动微波遥感的应用都是在美国、加拿大、欧洲等地，而我国在这方面的研究相对较少。首先介绍了被动微波遥感数据在监测积雪方面的国内外研究进展，对现存的雪水当量（SWE）估算算法（和模型）的适用性进行讨论。然后，详细讨论了我国西部的青藏高原地区雪水当量的估算，阐明了利用SSM／I数据估算青藏高原地区雪水当量的复杂性，并指出了其复杂性产生的原因，提出了解决问题的方法，为该地区积雪动态的进一步研究提供了理论依据。     

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

Exploration of remotely sensed forest structure and ultrasonic range sensor metrics to improve empirical snow models

Current methods to estimate snow accumulation and ablation at the plot and watershed levels can be improved as new technologies offer alternative approaches to more accurately monitor snow dynamics and their drivers. Here we conduct a meta‐analysis of snow and vegetation data collected in British Columbia to explore the relationships between a wide range of forest structure variables – obtained from Light Detection and Ranging (LiDAR), hemispherical photography (HP) and Landsat Thematic Mapper – and several indicators of snow accumulation and ablation estimated from manual snow surveys and ultrasonic range sensors. By merging and standardizing all the ground plot information available in the study area, we demonstrate how LiDAR‐derived forest cover above 0.5 m was the variable explaining the highest percentage of absolute peak snow water equivalent (SWE) (33%), while HP‐derived leaf area index and gap fraction (45° angle of view) were the best potential predictors of snow ablation rate (explaining 57% of variance). This study reveals how continuous SWE data from ultrasonic sensors are fundamental to obtain statistically significant relationships between snow indicators and structural metrics by increasing mean r² by 20% when compared to manual surveys. The relationships between vegetation and spectral indices from Landsat and snow indicators, not explored before, were almost as high as those shown by LiDAR or HP and thus point towards a new line of research with important practical implications. While the use of different data sources from two snow seasons prevented us from developing models with predictive capacity, a large sample size helped to identify outliers that weakened the relationships and suggest improvements for future research. A concise overview of the limitations of this and previous studies is provided along with propositions to consistently improve experimental designs to take advantage of remote sensing technologies, and better represent spatial and temporal variations of snow. Copyright © 2013 John Wiley & Sons, Ltd.