高分辨率遥感技术在厦门海湾生态环境调查中的应用

对于局部区域研究，高分辨率卫星遥感及其影像的智能化处理技术是获取信息的新手段．本文以IKONOS遥感影像在厦门海湾的应用为例，探讨高分辨率遥感卫星影像应用于海湾生态环境调查与分析的应用技术．通过分析高分辨率影像地物特征，提出高分辨率遥感影像的重要处理技术：采用不同缩放尺度进行分类和利用空间特征及纹理结构进行专题信息提取。     

南沙群岛珊瑚礁地貌图像信息管理系统

运用面向对象的软件开发技术,结合珊瑚礁地貌学、计算机图像学和计算机信息管理技术,在Windows平台上研制开发出南沙群岛珊瑚礁地貌图像信息管理系统。该系统集文件管理、数据库管理和图形、图像管理于一体,具有信息检索输出、信息编辑和信息维护等功能,以图形用户介面交互,达到"所见即所得"的效果。     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

GPS测高技术在无验潮水深测量中的应用

应用双频GPS动态后处理高精度定位技术，建立了一套完整的GPS无验潮海洋深度测量作业模式，通过海上试验与传统作业模式作了数值分析比较，结果表明，该作业模式不仅无需验潮，而且能够有效消除传统作业模式中船只动态吃水和涌浪等因素对测量成果的影响，显著提高水深测量成果的精度。     

悬浮沙激光散斑图像处理的研究

本文以统计模式识别为基础，阐述了图像处理在悬浮沙粒粒径流量中的实际应用，提出了用图像层析来确定放大系数的方法，提出了测量的准确度。     

走航测深数据的自动采集

本文介绍应用IBM微机实现走航实时水深及定位数据的自动采集系统。给出了联机系统方框图及采集、传送数据的程序流程图。并对IBM-PC/XT微机与测深仪之间的接口、数码转换和数据处理作了简要的叙述。     

一种基于电子地图的GPS导航定位技术

阐述了三种微机与GPS接收机间通讯的方法，并剖析了数种常见GPS接收机数据格式，基于图层结构用面向对象方法（OO）成功地构律字适用于导航定位的电子地图，该种导航定位技术已成功地应用于面向多波束数据后处理的成图系统MBChart，并在多波束勘测中得到初步试用，已取得预期效果。     

自动海洋站数据接收与处理软件的功能及特点

采集设备采集数据发送到值班PC机，在无人干预的情况下接收处理软件自动对数据进行回放和进一步处理，为用户提供数据产品和服务，并提供一个界面，使用户能够了解系统的运行状况，获得相关数据和状态参数。