Short-term and interannual variability of redox-sensitive chemical parameters in hypoxic/anoxic bottom waters of the Chesapeake Bay

A combination of CTD casts, discrete bottle sampling and in situ voltammetric microelectrode profiling was used to examine changing redox conditions in the water column at a single station south of the Bay Bridge in the upper Chesapeake Bay in late July/early August, 2002–2005. Short-term (2–4 h) fluctuations in the oxic/suboxic/anoxic interface were documented using in situ voltammetric solid-state electrodes. Profiles of dissolved oxygen and sulfide revealed tidally-driven vertical fluctuations of several meters in the depth and thickness of the suboxic zone. Bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺ also varied over the tidal cycle by approximately an order of magnitude. These data indicate that redox species concentrations at this site varied more due to physical processes than biogeochemical processes. Based on analysis of ADCP data, tidal currents at this station were strongly polarized, with the principal axis of tidal currents aligned with the mainstem channel. Together with the chemical data, the ADCP analysis suggests tidal flushing of anoxic bottom waters with suboxic water from north of the site. The present study is thus unique because while most previous studies have focused on processes across relatively stable redox interfaces, our data clearly demonstrate the influence of rapidly changing physical mixing processes on water column redox chemistry.Also noted during the study were interannual differences in maximum bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺. In 2003, for example, heavy spring rains resulted in severe hypoxia/anoxia in June and early July. While reported storm-induced mixing in late July/early August 2003 partially alleviated the low-oxygen conditions, bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺ were still much higher than in the previous year. The latter implies that the response time of the microbial community inhabiting the suboxic/anoxic bottom waters to changing redox conditions is slow compared to the time scale of episodic mixing events. Bottom water concentrations of the redox-sensitive chemical species should thus be useful as a tracer to infer prior hypoxic/anoxic conditions not apparent from ambient oxygen levels at the time of sampling.     

An inexpensive instrument for measuring benthic current velocity and direction at sea

An instrument which measures the velocity and direction of benthic water currents at depths of up to 80 m is described. Characteristics of this meter include: (i) readings are not affected by water flow during sinking or retrieval; (ii) it is portable; (iii) it operates unattended; (iv) it is inexpensive; and (v) it requires only simple maintenance. A timing circuit which operates two time periods in succession is used to activate and de-activate a revolution counter and a fluidfilled compass which are mounted on a special frame and vane system. In the field, the instrument accurately measured average current velocities of up to 6 m s⁻¹. Data are presented which illustrate the usefulness of this instrument in describing the velocity and direction of benthic currents along the east coast of Australia and demonstrate a positive correlation between benthic current velocity and catch rates of the commercially-exploited spanner crab Ranina ranina.     

Detailed measurements during a transient front in a small subtropical estuary

High-resolution measurements of velocity and physio-chemistry were conducted before, during and after the passage of a transient front in a small subtropical system about 2.1 km upstream of the river mouth. Detailed acoustic Doppler velocimetry measurements, conducted continuously at 25 Hz, showed the existence of transverse turbulent shear between 300 s prior to the front passage and 1300 s after. This was associated with an increased level of suspended sediment concentration fluctuations, some transverse shear next to the bed and some surface temperature anomaly.     

GPS测高技术在无验潮水深测量中的应用

应用双频GPS动态后处理高精度定位技术，建立了一套完整的GPS无验潮海洋深度测量作业模式，通过海上试验与传统作业模式作了数值分析比较，结果表明，该作业模式不仅无需验潮，而且能够有效消除传统作业模式中船只动态吃水和涌浪等因素对测量成果的影响，显著提高水深测量成果的精度。     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

一种基于电子地图的GPS导航定位技术

阐述了三种微机与GPS接收机间通讯的方法，并剖析了数种常见GPS接收机数据格式，基于图层结构用面向对象方法（OO）成功地构律字适用于导航定位的电子地图，该种导航定位技术已成功地应用于面向多波束数据后处理的成图系统MBChart，并在多波束勘测中得到初步试用，已取得预期效果。     

High Precision Geoid Models HKGEOID-2000 for Hong Kong and SZGEOID-2000 for Shenzhen, China

High precision geoid models HKGEOID-2000 for Hong Kong and SZGEOID-2000 for Shenzhen, China, have been developed with a hybrid approach of so-called sequential processing, using high precision GPS/leveling data, land and sea gravity anomalies, and digital terrain models. These two local geoid models have the same 1-km resolution. The estimated accuracy (external accuracy) is better than 1.7 cm for HKGEOID-2000 and 1.4 cm for SZGEOID-2000. Some common areas are covered by HKGEOID-2000 and SZGEOID-2000. So these two geoid models, along with high quality GPS/leveling data collected on the overlapping areas, can be used to detect the systematic bias between HKGEOID-2000 and SZGEOID-2000, as well as the difference between Hong Kong Principal Datum and 1956 yellow sea height datum of China, yielding RMS errors of 1.011 m and 1,003 m, respectively. Moreover, HKGEOID-2000, along with GPS ellipsoidal heights, is employed to determine the errors of the “orthometric heights” from purely trigonometric heighting, yielding an RMS error of 0.102 m. The combination of SZGEOID-2000 and GPS ellipsoidal heights has been used to replace the traditional spirit leveling and mapping, called GPS mapping.     

基于GIS的无人机地面监控系统的设计与实现

在分析无人机领域飞行数据特征的基础上,设计实现了一套功能较为完善的无人机地面监控系统。该系统主要完成了无人机飞行状态实时显示、航线规划和航线回放等功能模块。系统借助于G IS技术,导入矢量形式的电子地图,利用丰富的地理信息来辅助实现无人机的地面监控,在V isual C 6.0开发环境下利用基于异步方式和事件驱动方式的串口通信实现了系统与地面控制站的通信,利用地图控制文件实现了地图数据的调度,利用显示缓存实现了视图实时刷新。经过实际联调,系统运行良好,实用性较好。     

GPS数据采集技术及其在海洋调查中的应用

本文应用VB6．0开发了智能化的GPS数据采集软件．对该软件的功能进行了简单的介绍，同时对一些关键技术作了较详细的描述。利用该软件、GPS接收机及PC机的组合，可对走航式测量仪器(或移动设备)进行实时定位并保存定位记录，且大大减少一些不必要的数据，使得软件更为实用。     

海洋遥感四维测量应用

机载成象光谱仪遥感海洋是在轨星载海洋传感器定标校验的一种方法。本文研究了海洋航空遥感的四维测量方法，以及实现卫星、飞行遥感和船舶同步测量的重要意义。