GPS接收机专用芯片组技术发展

在总结国外现有的完整GPS接收机专用芯片组最新情况的基础上，结合典型的芯片产品，阐述了GPS接收机专用芯片组从分立式器件到片上系统、再到单片式接收机的技术发展过程、现状和趋势。     

北京54坐标转换至WGS-84坐标的方法

本文首先阐述了北京54坐标转换至WGS-84坐标的意义,介绍了北京54坐标转换至WGS-84坐标的实现过程及其方法.最后通过计算江苏省北京54坐标数据和C级GPS网数据对两种坐标转换方法进行了比较分析,并得出了有益的结论.     

微量相X射线衍射定量分析的一种简便方法

阐述了关于微量相X射线衍射定量分析的一种简便方法———近似线性关系法,它适用于二相体系(或基体吸收系数基本恒定的多相体系)材料中微量相的定量分析。该方法不需要在待测样品中加入参考物相,分析时仅需对一条衍射线进行测定,因而分析时间很短,其测定结果与实际含量的相对误差为-10.2%～ 21.4%,与外标法和内标法的测量结果的精度相当。     

GPS高程转换系统的研究及其应用

主要就GPS高程转换进行研究，对二次曲面模型、多面函数模型、神经网络模型等进行了研究，研制开发了具有数据输入、编辑、计算、分析与输出功能的GPS高程拟合转换系统，最后通过实例计算分析，验证了该系统的可靠性与可行性。     

Quick Bird遥感影像的几何校正

以高分辨率的Quick Bird卫星数据为对象,经影像信息融合,使处理后的图像分辨率提高且接近真彩色,具有良好的判识效果;选择若干个GPS地面控制点作为参考点,以遥感图像处理软件ER Mapper6.2为平台,对图像进行二次多项式几何精校正,纠正后的图像点位误差在lm左右,说明纠正后的图像具有较高的几何精度.     

国土资源行业“3S”技术集成研究及实用技术体系构建

本文面向国土资源信息化建设的实际需求,通过关键技术研究和技术集成,建立基于“3S”的国土资源数据获取、更新、管理、交换与应用的技术体系,通过应用示范研究,形成实用、可推广的技术流程和应用软件。研究结果表明,基于“3S”的技术体系,以其精确的空间定位、快速准确的数据获取、强大的数据管理能力,能够满足国土资源信息化建设的实际需要。     

GPS静态定位技术在滆湖公路大桥测量中的应用

介绍了利用全球定位系统(GPS)静态定位技术，如何为滆湖公路大桥建立控制网，延伸出时控制网平差方案的确立上，以及如何使控制网中的成果与公路主线控制网中的成果互相兼容，从而为工程的设计与施工提供必要的控制资料。     

GPS新近发展及其军事应用

本文简述了GPS的最新发展动态，着重分析了GPS在精确制导武器上的应用形式和效果，指出了GPS制导技术存在的局限性及其未来发展趋势。     

Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Single frequency processing of Ørsted GPS radio occultation measurements

The Global Positioning System (GPS) radio occultation measurements obtained using the TurboRogue GPS receiver on the Danish satellite Ørsted have been processed using the single frequency method. Atmospheric profiles of refractivity and temperature are derived and validated against numerical weather prediction data from the European Centre for Medium-Range Weather Forecast (ECMWF). Results from the Ørsted GPS measurement campaign in February 2000 indicate that the single frequency method can provide retrievals with accuracy comparable to that of using two frequencies. From comparisons between measured dry temperature profiles and corresponding dry temperature profiles derived from ECMWF analysis fields, we find a mean difference of less than 0.5 K and a standard deviation of 2–4 K between 500 and 30 hPa in height. Above 30 hPa the impact of the ionosphere becomes more dominant and more difficult to eliminate using the single frequency method, and the results show degraded accuracy when compared to previous analysis results of occultation data from other missions using the dual frequency method. At latitudes less than 40° (denoted low latitudes), the standard deviation is generally smaller than at latitudes higher than 40° (denoted high latitudes). A small temperature bias is observed centered at 200 hPa for low latitudes and at 300 hPa for high latitudes. This indicates that the ECMWF analyses do not adequately resolve the tropopause temperature minimum. In the lowest part of the troposphere an observed warm bias is thought to be due to erroneous tracking of the GPS signal in cases of atmospheric multipath propagation.