GPS在胶济铁路勘测定界工程中的应用

根据胶济客运专线工程勘测定界工作的成功施测经验,探讨了GPS在狭长带状工程中的应用。针对狭长带状控制网,探讨了如何合理布设GPS点,使控制网更趋于合理,各项指标更完备,同时最大程度地节省人力、物力和时间。     

GPS技术在金川露天矿边坡变形监测中的应用

本文结合金川露天矿边坡变形GPS监测研究,主要论述监测基点的选择,基点WGS-84坐标的确定,变形监测网的布设,GPS数据采集、处理和质量,坐标转换的实施等,给出反演推出的若干四等三角点及其它控制点的变形数据,这些数据和造成变形的物理成因符合得很好,最后概括出GPS技术应用于变形观测的若干优点。     

COSMIC数据验证AMSU平流层低层观测的初步分析结果

基于Global Positioning System (GPS)掩星数据在平流层具有较高准确性、稳定性的优势,本文尝试用新一代GPS掩星观测——the Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC)资料验证不同卫星平台上先进的微波探测仪（AMSU）的平流层观测结果.通过COSMIC大气温度廓线与AMSU辐射传输模式结合,得到模拟亮温,然后与AMSU平流层观测进行匹配比较.分析表明GPS掩星数据能够作为一个相对独立的参量检验NOAA15、16、18卫星平台内部的偏差.通过一年数据的比较验证,初步显示不同卫星平台的AMSU观测亮温在平流层低层都偏低,并且NOAA18平台的亮温偏低程度明显大于NOAA15、16.AMSU亮温偏差在极地冬季较为显著,尤其南极地区NOAA18的偏差幅度达到1.8 K.结合24小时内AMSU观测亮温偏差变化及其样本分布特征,可以看到明显的太阳辐射差异可能是导致AMSU观测亮温在极地偏差显著的主要原因.     

特种监测网解算中IGS站选取的探讨

利用GAMIT/GLOBK软件处理2011年特种监测网的观测数据,将IGS站的选取分10种方案进行试验,计算结果从基线长度变化、测站坐标、NRMS、基线重复率等方面进行了比较。得出利用GAMIT/GLOBK软件处理该特种监测网时的几点建议:建议选取IGS站为GPS网提供参考框架;IGS站选取的数量不一定最多,但空间上应尽量均匀分布;选取7个IGS站时得到较高精度的结果。在日后处理此类型的特种监测网时对IGS站选取具有一定的参考价值。     

Ibiza Absolute Calibration Experiment: Survey and Preliminary Results

Within the framework of a project comprising part of the Spanish Space Program related to the JASON-1 CNES (Centre National d'Etudes Spatiales)/NASA (National Aeronautics and Space Administration) mission, a campaign was conducted from June 9–17, 2003, on the Absolute Calibration Site of the island of Ibiza. The objective was to determine the local marine geoid slope under the ascending (187) and descending (248) Jason-1 ground tracks, in order to allow a better extrapolation of the open-ocean altimetric data with on-shore tide gauge locations, and thereby improve the overall precision of the calibration process. For this we have used a catamaran with two GPS antennas onboard, following the Corsica/Senetosa design (Bonnefond et al. 2003a Bonnefond, P., Exertier, P., Laurain, O., Menard, Y., Orsoni, A., Jeansou, E., Haines, B., Kubitschek, D. and Born, G. 2003a. Leveling Sea Surface using a GPS catamaran. Marine Geodesy, 26(3–4): 319–334. [Taylor &; Francis Online], [Web of Science ®] , [Google Scholar]). Five GPS reference stations were deployed in order to reduce the distance between the areas covered by the catamaran and the fixed GPS receiver used in the kinematic process. The geodetic activities (e.g., GPS, leveling) have enabled the building of a very accurate (few mm) network in a reference frame compatible with the satellite altimetry missions (ITRF 2000). The GPS kinematic data were processed using two different software programmes, allowing checking of the consistency of the solutions. If the standard deviation of the differences (3.3 cm) is close to the kinematic process precision, they exhibit some large values (up to 14 cm). These large discrepancies have been reduced using a weighting based on the crossover differences. Inasmuch as the distances between the tide gauges and the areas covered by the GPS catamaran were becoming large, we have used the MOG2D ocean model (Carrère and Lyard 2003 Carrère, L. and Lyard, F. 2003. Modelling the barotropic response of the global ocean to atmospheric wind and pressure forcing—comparisons with observations. Geophys. Res. Letters, 30(6) [Google Scholar]) to correct the sea surface from tides. In the farthest areas, the crossover differences show an improvement by a factor of two. Finally, we also present preliminary results on Jason-1 altimeter calibration using the derived marine geoid. From this analysis, the altimeter bias is estimated to be 120 ± 5 mm. The quality of this first result validates the whole GPS-based marine geoid processing, for which the accuracy is estimated to be better than 3 cm rms at crossovers.     

跨海高程传递方法的评价

针对跨海高程传递的最新进展,介绍了几种高程传递的实用方法,对优缺点和适用范围进行了分析与评价。初步试验结果分析表明,对于10km内的高程传递,几种方法均满足三等水准的精度要求,对于更远距离的跨海高程传递还需进一步研究。     

Accurate GPS measurement of the location and orientation of a floating platform

Abstract

This article describes the design and initial tests of the GPS portion of a system for making seafloor geodesy measurements. In the planned system, GPS antennas on a floating platform will be used to measure the location of an acoustic transducer, attached below the platform, which interrogates an array of transponders on the seafloor. Since the GPS antennas are necessarily some distance above the transducer, a short‐baseline GPS interferometer consisting of three antennas is used to measure the platform's orientation.

A preliminary test of several crucial elements of the system was performed at the Scripps Institution of Oceanography (SIO) in December 1989. The test involved a fixed antenna on the pier and a second antenna floating on a buoy about 80 m away. GPS measurements of the vertical component of this baseline, analyzed independently by two groups using different software, agree with each other and with an independent measurement within a centimeter.

The first test of an integrated GPS/acoustic system took place in the Santa Cruz Basin off the coast of southern California in May 1990. In this test a much larger buoy, designed and built at SIO, was equipped with three GPS antennas and an acoustic transducer that interrogated a transponder on the ocean floor. Preliminary analysis indicates that the horizontal position of the transponder can be determined with a precision of about a centimeter. Further analysis will be required to investigate the magnitude of systematic errors.     

基于GPS PPK技术的远距离高精度验潮方法研究

为实现远岸潮汐精确监测,基于GPS PPK技术开展了远距离高精度GPS验潮方法研究。研究给出了GPS潮位测量方法,其次联合GPS定位信息和IMU姿态信息,通过坐标转换原理得到瞬时水面的精确高程。在此基础上,研究利用基于FFT的低通滤波技术提取潮位信息。最后在烟台港进行了实际工程试验。试验结果表明,当GPS PPK验潮距离达98km时,潮位误差可控在!15cm以内,验潮精度仍可优于10cm。     

Jason-1 Precision Orbit Determination by Combining SLR and DORIS with GPS Tracking Data

With the implementation of the Jason-1 satellite altimeter mission, the goal of reaching the 1-cm level in orbit accuracy was set. To support the Precision Orbit Determination (POD) requirements, the Jason-1 spacecraft carries receivers for DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) and GPS (Global Positioning System), as well as a retroreflector for SLR (Satellite Laser Ranging). The overall orbit accuracy for Jason will depend on the quality and the relative weighting of the available tracking data. In this study, the relative importance of the SLR, DORIS, and GPS tracking data is assessed along with the most effective parameterization for accounting for the unmodeled accelerations through the application of empirical accelerations. The optimal relative weighting for each type of tracking data was examined. It is demonstrated that GPS tracking alone is capable of supporting a radial orbit accuracy for Jason-1 at the 1-cm level, and that including SLR tracking provides additional benefits. It is also shown that the GRACE (Gravity Recovery and Climate Experiment) gravity model GGM01S provides a significant improvement in the orbit accuracy and reduction in the level of geographically correlated orbit errors.     

基于Matlab的TEQC在GPS数据预处理中的应用

利用Matlab二次开发编制teqcplot程序模块,实现质量检查结果的图形显示和可视化查询,将GPS观测数据中存在的电离层延迟和多路径效应的影响定量地表示出来,提高了数据处理的工作效率。并用实测数据进行验算,根据检查结果对GPS观测数据进行相应的处理,通过对比分析结果表明,经TEQC预处理后的观测数据,有效地提高了GPS基线解算的质量。