不确定性选址问题探讨

阐述了GIS网络分析中不确定性选址问题的基本模型及特性。从问题的定义可知其为NP完备类问题。推导了最优解在紧条件的下界算法,并结合广义Powell算法及遗传算法,提出了不确定性选址问题的混合遗传算法,实验证明,在最优解的品质和收敛速度上都达到了比较好的效果。同时,实验的结果从另一个角度证明,如果兼顾收敛速度和解的品质这两个指标,单纯的遗传算法未必比其他搜索算法更优越,采用一些局部搜索性能较好的算法结合遗传算法,可以从两方面改善求解效果。     

高职GIS专业实践教学及实践基地建设

高职教育是GIS人才培养的重要组成部分。本文通过介绍职教GIS专业的建设，探索GIS实践教学与实践基地建设模式、方法及对人才培养的影响。     

Spatial probabilistic modeling of slope failure using an integrated GIS Monte Carlo simulation approach

Spatial probabilistic modeling of slope failure using a combined Geographic Information System (GIS), infinite-slope stability model and Monte Carlo simulation approach is proposed and applied in the landslide-prone area of Sasebo city, southern Japan. A digital elevation model (DEM) for the study area has been created at a scale of 1/2500. Calculated results of slope angle and slope aspect derived from the DEM are discussed. Through the spatial interpolation of the identified stream network, the thickness distribution of the colluvium above Tertiary strata is determined with precision. Finally, by integrating an infinite-slope stability model and Monte Carlo simulation with GIS, and applying spatial processing, a slope failure probability distribution map is obtained for the case of both low and high water levels.     

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.     

Stability analysis of the Vallcebre translational slide,Eastern Pyrenees (Spain) by means of a GIS

The stability of the landslide of Vallcebre has been evaluated by means of a GIS. The landslide mechanism is a translational failure which has been analysed as an infinite slope. Soil strength parameters and groundwater conditions are obtained from laboratory tests and monitoring devices. Geometric parameters necessary to compute the factor of safety at each individual cell are generated by interpolation from the boreholes present in the landslide. The results have been checked with the actual behaviour of the landslide and are consistent. The comparison between a conventional slope stability analysis and the GIS-based approach gives similar results, showing the feasibility of the latter.     

Predictive GIS-Based Model of Rockfall Activity in Mountain Cliffs

Rockfall susceptibility has been analysed in mountain cliffs of the Cantabrian Range, North Spain. The main aim of this analysis has been to build a predictive model of rockfall activity from a low number of environmental and geological variables. The rockfall activity has been quantified in a GIS. The cartographic information used shows the spatial distribution of all the recent talus screes as well as their associated source areas in the rock-slopes. The area relation At/Ar (recent talus scree polygon/source basins) in the rock slopes has been used as the rockfall activity indicator. This relation has been validated in 50 pilot rock-slopes and compared with the relation number of recent rock fragments/source basin, obtained from field work. The environmental factors causing rockfall depend on the rock slope situation, and these are: altitude and sun radiation on the rock cliff. The geological factors considered are: lithology, relative position of the main discontinuities with respect to the topographic surface and two morphologic parameters: the roughness and slope gradient. A logistic regression analysis has been applied to a population of 442 limestone and quartzite rock cliffs. The dependent variable is the rockfall activity indicator, which allows the definition of two classes of rock cliff units: low and high activity. The independent variables are altitude, sun radiation (equinox radiation, summer solstice radiation, winter solstice radiation), slope roughness, slope gradient,anisotropy and lithology. Results suggest that it is possible tobuild a valid cartographic predictive model for rockfall activity in mountain rock cliffs from a limited number of easily obtainable variables. The method is especially applicable in massive rock slopes or in regions with uniform rock mass characteristics.     

Use of Geomorphological Information in Indirect Landslide Susceptibility Assessment

The objective of this paper is to evaluate the importance of geomorphological expert knowledge in the generation of landslide susceptibility maps, using GIS supported indirect bivariate statistical analysis. For a test area in the Alpago region in Italy a dataset was generated at scale 1:5,000. Detailed geomorphological maps were generated, with legends at different levels of complexity. Other factor maps, that were considered relevant for the assessment of landslide susceptibility, were also collected, such as lithology, structural geology, surficial materials, slope classes, land use, distance from streams, roads and houses. The weights of evidence method was used to generate statistically derived weights for all classes of the factor maps. On the basis of these weights, the most relevant maps were selected for the combination into landslide susceptibility maps. Six different combinations of factor maps were evaluated, with varying geomorphological input. Success rates were used to classify the weight maps into three qualitative landslide susceptibility classes. The resulting six maps were compared with a direct susceptibility map, which was made by direct assignment of susceptibility classes in the field. The analysis indicated that the use of detailed geomorphological information in the bivariate statistical analysis raised the overall accuracy of the final susceptibility map considerably. However, even with the use of a detailed geomorphological factor map, the difference with the separately prepared direct susceptibility map is still significant, due to the generalisations that are inherent to the bivariate statistical analysis technique.     

Application of Weights of Evidence to Mineral Potential Mapping of Yujiacun Ore Field in Northwest Yunnan Province, China

The multivariate information conprehensive processing technique is especially important at present to the digital mineral prospecting. However, the GIS-based weights of evidence have provided us with powerful tool for the quantitative assessment of mineral resource potential. In this paper, the mineralization model is established, based on the achievements made by previous researchers, to mend such deficiencies ad few references on ore fields in Yujiacun, Yunnan Province and the shortage of quantitative prediction and assessment of mineral resources. In addition, the weights of evidence are used to make a systematic quantitative prediction and assessment of mineral resources there, so that 2 mineral prospecting target areas of grade Ⅰ and 8 mineral prospecting target areas of grade Ⅱ are delineated, providing the further mineral resource exploration with the basis for the selection of mineral deposits.     

Creating a GIS application for retail centers in Jeddah city

The aim of this paper is to identify the role of geographical information systems (GIS) in supporting retail planners in monitoring and analyzing retail development and growth. At first, a review about retail planning and its relevant issues is made. Second, GIS is defined together with its applications in retail planning. The third part discusses the created GIS application that is designed for two retail centers in Jeddah city, Saudi Arabia. This application is created to help planners in defining the distribution of retail demand, describing customers profile, analyzing trade areas and modeling retail flows. Two useful models have been produced by this study. One is called market penetration and the other is based on spatial interaction technique. The former is created to examine retail center catchment area, while the latter is used to model the interaction between demand areas and retail centers.     

地理空间元数据和基于网络的数据分发技术

首先介绍了元数据、地理空间元数据的概念，探讨了在互联网时代研究地理空间元数据的迫切性和必要性；其次，论述了构建基于网络的数据分发方案的可行性，并就其中的关键技术实现做了深入的探讨；最后，提出了一个以地理空间元数据标准为依据，以Internet为依托的数据分发站点的整体设计方案以及实现这项技术还应考虑的问题。