影像融合效果的质量评价研究

本文对常用的影像质量评价方法进行了系统研究,在归纳常用的影像质量定量评价指标的基础上,给出了不同融合目的和融合方法下的质量评价方案。     

Melting of crustal xenoliths within ascending basalt: Example from the Kula volcanic field,western Anatolia,Turkey

During its storage or ascent, basaltic magma inevitably interacts with the surrounding rocks. In this study, schist xenoliths incorporated within ascending basalt are examined. Heating of the xenoliths combined with decompression effect of rapid magma uprise led to dehydration melting of hydrous minerals producing hercynitic spinel, melt, sillimanite and FeTi oxides. The melt is rhyolitic, strongly peraluminous (1.77 < A/CNK < 2.35) and corundum normative. It may contain up to 8 wt%FeO_t. It occurs between the foliation planes and in the intragranular environment. Dehydration melting of micas in the schist is probably related to combined effects of heating by basaltic magma and decompression due to the rapid rise. Melting of xenoliths was a progressive process at low pressure. To cite this article: H. Bayhan et al., C. R. Geoscience 338 (2006).     

TerraSAR-X/TanDEM-X获取高精度数字高程模型技术研究

以双星系统(TerraSAR-X/TanDEM-X)下的bistatic数据模式为例研究了差分干涉获取高精度DEM产品的融合算法和技术流程.针对不同观测几何条件下(升降轨,不同入射角)观测数据的畸变和缺失,提出一种迭代的顾及垂直基线、阴影和叠影的数据融合新方法重建高分辨率高精度的数字高程模型,并对TanDEM-X融合的DEM在不同地物属性特征下(山区及高楼林立的城区)的精度进行定量分析.本文采用了两对覆盖珠海、澳门区域的升降轨TerraSAR-X/TanDEM-X干涉对进行融合处理,并通过收集的高精度Lidar数据进行精度比较分析.此外,本文还定量分析了TanDEM-X的DEM对常规DInSAR技术的改进,并与SRTM、ASTER的结果进行对比.结果表明:提出的升降轨融合方法较单一轨道平台能够较好地改正或减弱由于几何畸变引起的高程信息缺失或错误,通过与Lidar数据的对比发现TanDEM-X的融合DEM在山区的精度较高,其残差的标准差为3.5 m,较单一轨道(升、降轨)分别降低8%和22%,能够通过迭代的方法获取高分辨率(可达2~5m)、高精度的地形信息;而针对城区密集建筑物的复杂地形来说,融合的DEM的精度稍低,残差的标准差为11.8m,但较单一轨道(升、降轨)来说有较大改进,其残差标准差分别降低了28%和22%;而在分布较为稀疏的居民区,融合的DEM能够较Lidar数据获取更好的建筑物高度及外形信息,此时的残差标准差可达5m.同时,TanDEM-X的融合DEM作为外部DEM能够较SRTM和ASTER来说更好地去除地形信息,尤其在山区及高程建筑密集分布的城区,从而利于后续的相位解缠和形变信息的精确获取和解译,为更高精度的时序InSAR形变监测提供有利条件.     

基于特征的遥感图像信息融合模式研究

基于图像特征的遥感图像信息融合是在突出目标地物的空间结构和纹理特征情况下的信息融合。本文在数字图像小波多分辨率分析理论基础上,采用小波变换方法对高分辨率遥感图像的目标地物边缘进行信息增强,然后与多光谱遥感图像进行特征信息融合。在融合过程中,首先对多光谱图像中的R、G、B三个波段的图像进行小波分解,得到相应的低频图像,并对特征增强后的高分辨率图像进行小波分解,再将分解后的高频图像分别与低频图像进行融合,最后经RGB合成为彩色图像。该方法既改善了图像的清晰度和分辨率,同时也保留了原图像的光谱信息。本文最后通过融合实验验证了上述结论。     

团头鲂(Megalobrama amblycephala)两种热休克蛋白 70(HSP70s)的原核表达、纯化及鉴定

采用PCR方法扩增团头鲂组成型HSC70和诱导型HSP70基因完整的编码区片段,并分别克隆到原核表达载体pET-22b(+)中,然后转化大肠杆菌BL21(DE3),用1mmol/L IPTG在不同温度及时间下进行诱导表达。采用Ni-NTA His Bind Resins亲和层析和DEAE-Sepharose FF阴离子交换柱层析对目的蛋白进行纯化,并进行SDS-PAGE和Western-blotting分析。结果表明,成功构建了团头鲂两种重组表达质粒pET-22b(+)/Ma-HSC70和pET-22b(+)/Ma-HSP70,表达融合蛋白的相对分子量均约为72kDa,并能与兔抗人HSP70多抗进行特异性结合,这两种HSP70s融合蛋白经纯化后的纯度均达到95%以上。本实验选择融合蛋白Ma-HSC70在25℃和Ma-HSP70在30℃下分别诱导7h作为可溶性表达的最佳条件。     

The operational method of filling information gaps in satellite imagery using numerical models

Occurrence of cloud cover over remotely sensed area is a significant limitation in the ocean colour and infra-red remote sensing applications, especially when operational use of such a data is considered. A method for the reconstruction of missing data in remote sensing images has been proposed. It is based on complementing satellite data with the corresponding information from other sources of data, in our tested case it was the ecohydrodynamic model. The method solves the problem the presence of a cloud cover also during an extended period. Unlike in many other similar methods, emphasis has been put on retaining remotely sensed information to a high degree and preserving local phenomena that are usually difficult to capture by other methods than satellite remote sensing. The method has been tested on the Baltic Sea. Sea surface temperature and chlorophyll a concentration estimated from satellite data, ecohydrodynamic models and merged product were compared with in situ data. The algorithm was optimized for the two parameters that are crucial for e.g. creating algae bloom forecasts. The root mean square error (RMSE) of the final product of sea surface temperature was 0.73 °C, whereas of the input satellite images 1.26 °C or 1.33 °C and of model maps 0.89 °C. The error factor of chlorophyll a concentration product was 1.8 mg m⁻³, in comparison to 2.55 mg m⁻³ for satellite input source and 2.28 mg m⁻³ for the model one. The results show that the proposed method well utilizes advantages of both satellite and numerical simulation data sources, at the same time reducing the errors of estimation of merged parameters compared to similar errors for both primary sources. It would be a valuable component of fuzzy logic and rule-based HABs prediction.     

X射线荧光光谱分析在我国铁矿石分析中的应用

系统介绍了20世纪90年代以来X射线荧光光谱分析（XRF）在我国铁矿石分析中的应用,包括粉末压片法和熔片法两种最基本的分析手段,主要内容集中在熔片—波长色散X射线荧光光谱分析法在我国铁矿石分析方面的测试技术,重点介绍了熔剂的类型、配比、熔片方法、熔融温度以及钴内标的使用,同时介绍了基体效应校正、谱线重叠校正等方面的内容。     

X射线荧光光谱法测定钒钛磁铁矿石中的主次量组分

采用熔融玻璃片制样,选用ZSX Primus Ⅱ X射线荧光光谱仪对钒钛磁铁矿样品中的V₂O₅、TiO₂、TFe、CaO、MgO、Al₂O₃、SiO₂、P₂O₅、MnO等组分进行测定,分析结果与标准值和及化学值相吻合,10次测定的相对标准偏差小于10%。     

SAR影像与TM影像的几种融合处理方法

利用彩色空间变换、比值变换及相关系数法分别对SAR影像与TM3 、TM4 、TM5 三波段影像进行融合处理。文章介绍了影像融合中的具体技术问题及其处理方法。因侧视雷达图像一般有明显的孤立噪声,所以,在进行影像融合处理之前,先对SAR影像进行预处理,文中用δ滤波法抑制孤立噪声(光斑) .最后,从视觉效果、熵、平均梯度值以及标准差等4 方面评价了影像融合的质量。     

空间数据融合的框架流程及发展现状研究

在介绍空间数据概念和框架流程的基础上,文章将数据集成、数据匹配和数据融合三个重要环节分别展开,列举了各自的内容、处理方法及研究现状。重点介绍了基于本体的语义集成,线状、面状要素的数据匹配,矢量、栅格数据间的融合处理,以及空间数据基础设施(SDI)。