Damage localization of marine risers using time series of vibration signals

Based on dynamic response signals a damage detection algorithm is developed for marine risers. Damage detection methods based on numerous modal properties have encountered issues in the researches in offshore oil community. For example, significant increase in structure mass due to marine plant/animal growth and changes in modal properties by equipment noise are not the result of damage for riser structures. In an attempt to eliminate the need to determine modal parameters, a data-based method is developed. The implementation of the method requires that vibration data are first standardized to remove the influence of different loading conditions and the autoregressive moving average (ARMA) model is used to fit vibration response signals. In addition, a damage feature factor is introduced based on the autoregressive (AR) parameters. After that, the Euclidean distance between ARMA models is subtracted as a damage indicator for damage detection and localization and a top tensioned riser simulation model with different damage scenarios is analyzed using the proposed method with dynamic acceleration responses of a marine riser as sensor data. Finally, the influence of measured noise is analyzed. According to the damage localization results, the proposed method provides accurate damage locations of risers and is robust to overcome noise effect.     

基于阈值区间的海洋锋面提取模型

A model （Bayesian oceanic front detection, BOFD） of sea surface temperature （SST） front detection in satel- lite-derived SST images based on a threshold interval is presented, to be used in different applications such as climatic and environmental studies or fisheries. The model first computes the SST gradient by using a Sobel algorithm template. On the basis of the gradient value, the threshold interval is determined by a gradi- ent cumulative histogram. According to this threshold interval, front candidates can be acquired and prior probability and likelihood can be calculated. Whether or not the candidates are front points can be deter- mined by using the Bayesian decision theory. The model is evaluated on the Advanced Very High-Resolution Radiometer images of part of the Kuroshio front region. Results are compared with those obtained by using several SST front detection methods proposed in the literature. This comparison shows that the BOFD not only suppresses noise and small-scale fronts, but also retains continuous fronts.     

应用极化合成孔径雷达检测海上溢油研究进展

海上溢油给海洋生态环境带来严重的影响,快速准确地探测溢油对于防灾减灾具有重要的意义。利用卫星遥感探测溢油已成为目前主要的检测手段,大多采用合成孔径雷达(SAR)数据,运用图像处理的方法,开展了多种溢油提取算法的研究,取得了较好的结果,但由于海洋的类溢油现象存在,造成提取信息的精度达不到要求。近年来,国内外运用极化SAR数据开展溢油信息提取研究,从极化分解与相位差等角度对溢油特性分析,能有效地区分一些类溢油现象,得到了较理想的结果。分析了应用SAR数据开展溢油信息提取的研究状况,总结了溢油极化SAR探测的研究,指出了目前研究中存在的不足,并提出了今后溢油极化SAR遥感监测的方向。     

基于GPS反射信号技术的渤海海冰实验

传统的海冰检测手段都存在着受天气影响或实时检测成本太高的缺点,为了更实时有效的检测海冰,减轻海冰灾害对于我国的影响,并达到防灾减灾的目的,本文研究了GPS反射信号(GPS-R)技术检测海冰的可能性。通过对2013年2月下旬在中国天津渤海湾的岸基架设GPS信号接收机所接收的观测数据进行分析,使用不同特性的反射海域(几乎全为海水或是海冰)的数据进行比对分析,其结果显示极化比值(反射左旋信号与直射右旋信号的比值)能够明显反演海冰密集度。本文首次将GPS-R技术应用于国内自主设计的渤海海冰检测实验中。     

海杂波微弱目标分形检测

The target on the sea surface is complex and difficult to detect due to the interference of backscattered returns from the sea surface illuminated by the radar pulse. Detrended fluctuation analysis （DFA） has been used successfully to extract the time-domain Hurst exponent of sea-clutter series. Since the frequency of the sea clutter mainly concentrates around Doppler center so that we consider to extract frequency-do- main fractal characterization and then detect a weak target within sea clutter by using the difference of frequency-domain fractal characterization. The generalized detrended fluctuation analysis （GDFA） is more flexible than traditional DFA owing to its smoothing action for the clutters. In this paper, we apply the GDFA to evaluate the generalized Hurst exponent of sea-clutter series in the frequency domain. The difference of generalized Hurst exponents between different sea-clutter range bins would be used to determine whether the target exists. Moreover, some simulations with the real IPIX radar data have also been demonstrated in order to suooort this conclusion.     

多模式智能路灯控制系统

使用AT89S52单片机作为主控芯片,设计了一种多模式智能路灯控制系统,该系统能够根据道路、巷口或定时应用3种情况进行工作模式选择,并根据环境光亮度决定是否启动所设定的工作模式.巷口工作模式时,系统通过红外传感器检测道路上有汽车或行人通过时,将识别信号送入单片机,由单片机控制交通灯开启;道路工作模式时,路灯处于开启状态,以保障行人畅行;定时模式时,通过DS1302定时模块,可以设定路灯的开关时间.此外,该系统还具有自动故障检测功能,功能全面,有较强的实用价值.     

A GIHS-based spectral preservation fusion method for remote sensing images using edge restored spectral modulation

High spatial resolution and spectral fidelity are basic standards for evaluating an image fusion algorithm. Numerous fusion methods for remote sensing images have been developed. Some of these methods are based on the intensity–hue–saturation (IHS) transform and the generalized IHS (GIHS), which may cause serious spectral distortion. Spectral distortion in the GIHS is proven to result from changes in saturation during fusion. Therefore, reducing such changes can achieve high spectral fidelity. A GIHS-based spectral preservation fusion method that can theoretically reduce spectral distortion is proposed in this study. The proposed algorithm consists of two steps. The first step is spectral modulation (SM), which uses the Gaussian function to extract spatial details and conduct SM of multispectral (MS) images. This method yields a desirable visual effect without requiring histogram matching between the panchromatic image and the intensity of the MS image. The second step uses the Gaussian convolution function to restore lost edge details during SM. The proposed method is proven effective and shown to provide better results compared with other GIHS-based methods.     

Multi-class geospatial object detection and geographic image classification based on collection of part detectors

The rapid development of remote sensing technology has facilitated us the acquisition of remote sensing images with higher and higher spatial resolution, but how to automatically understand the image contents is still a big challenge. In this paper, we develop a practical and rotation-invariant framework for multi-class geospatial object detection and geographic image classification based on collection of part detectors (COPD). The COPD is composed of a set of representative and discriminative part detectors, where each part detector is a linear support vector machine (SVM) classifier used for the detection of objects or recurring spatial patterns within a certain range of orientation. Specifically, when performing multi-class geospatial object detection, we learn a set of seed-based part detectors where each part detector corresponds to a particular viewpoint of an object class, so the collection of them provides a solution for rotation-invariant detection of multi-class objects. When performing geographic image classification, we utilize a large number of pre-trained part detectors to discovery distinctive visual parts from images and use them as attributes to represent the images. Comprehensive evaluations on two remote sensing image databases and comparisons with some state-of-the-art approaches demonstrate the effectiveness and superiority of the developed framework.     

通过软硬变化检测识别冬小麦

提出一种软硬变化检测的作物识别方法 SHLUCD(Soft and Hard Land Use/Cover Change Detection Method)。该方法利用多期遥感影像能够有效表达作物的生长物候特征,以达到在离散变化区(即纯净像元区,包括完全转换成作物的突变区域和非作物区域)和连续变化区(即渐变区,混合像元区,是部分转化为作物的区域)准确进行作物的识别。在北京市选择一个研究区,以冬小麦为研究对象,选用2011年10月6日(播种期)和2012年4月16日(拔节期)两期环境减灾1号卫星影像,分别采用硬变化检测方法 HLUCD(Hard Land Use/Cover Change Detection Method)、软变化检测方法 SLUCD(Soft Land Use/Cover Change Detection Method)和SHLUCD进行冬小麦的识别。实验结果表明:在不同尺度窗口下,SHLUCD较传统方法表现出较明显的优势,具有更低的均方根误差RMSE(SHLUCD为[0.14,0.07],HLUCD为[0.15,0.07],SLUCD为[0.16,0.08])和偏差bias(SHLUCD为-0.0008,HLUCD为-0.007,SLUCD为0.014)和更高的决定系数R2(SHLUCD为[0.68,0.86],HLUCD为[0.62,0.86],SLUCD为[0.60,0.86])。针对冬小麦突变区域、冬小麦渐变区域和非冬小麦区域分别进行评价,表明SHLUCD识别精度接近各区最佳的识别方法,进一步验证了SHLUCD的灵活性和适用性。SHLUCD方法在离散变化区能够通过土地覆盖类型状态变化来有效地识别出冬小麦,在连续变化区可识别出土地覆盖的状态变化程度定量表达冬小麦的丰度,是其他作物多时相遥感变化检测的前期实验基础。     

结合空间上下文与慢特征分析的多光谱影像变化检测

为了提高多光谱影像变化检测的精度,本文提出了一种结合空间上下文与慢特征分析的方法。首先采用自适应空间上下文提取算法围绕像素构建自适应区域,探索像素周围的上下文信息;然后通过迭代慢特征分析,由相应像素周围的成对自适应区域定量计算成对像素之间的变化强度,增强变化区域与未变区域的可分性;最后生成变化强度图像,采用大津阈值法作二值分类,将变化强度图划分为二值变化检测图。利用Landsat 7卫星ETM+传感器的图像,与4种基于代数的方法及基于变换的方法进行对比试验,结果表明,本文方法在降低漏检方面有所改善,提高了召回率。