深水风浪的平均波长与平均周期的关系

在Gaussian波场基础上,推导出以P-M谱和平均JONSWAP谱代表的充分成长和有限风区的深水风浪平均波长与平均波周期之间的关系为.推导中运用了Rice跨零点问题的解并通过滑动时间平均技术估计4阶谱矩.在风浪水槽进行了实验,实验结果与有限风区下推导出的关系相比较,符合较好.     

三传感器波浪水槽二次反射主动吸收方法

三传感器波浪水槽二次反射主动吸收方法是加拿大科学院水力中心最近开发的一种水槽反射波控制技术。该法在造波板前 1～ 2倍波长处布置 3个传感器 ,通过入反射波分离方法得到准确的入反射波参数 ,以此调整造波信号 ,有效地吸收由建筑物反射回到造波板的二次反射波。文中在分析波浪水槽二次反射吸收方法研究现状的基础上 ,介绍了加拿大水力中心对现有方法的改进及其效果     

Analytic Solution of Interaction Between Surface Waves and Floating Elastic Plates with Elastic End-Restraints

Based on the dynamic theories of water waves and Mindlin plates,the analytic solution of interaction between surface waves and two-dimensional floating elastic plates with edge-restraint is constructed by use of the Wiener-Hopf technique.Firstly,without regard for elastic edge restraint,the wave-induced responses of elastic floating plate analyzed by the present method are in good agreement with the results from literature and experimental results.Therefore,it can be shown that the present method is valid.Secondly,three end-restraint cases(i.e.,the left-end elastic restraints,the both-end elastic restraints,and the right-end elastic restraints)are proposed to reduce the vibration of floating plates,in which the spring is used to connect the sea bottom and the floating plate's left(or right)edge.The relations between the spring stiffness and the parameters of wave-induced responses of floating plates are discussed.Moreover,the effective method to reduce the vibration of floating elastic plates can be obtained through comparison.     

南海北部外陆架和上陆坡海底滑坡稳定性研究

海洋工程地质调查发现，在南海北部外陆架和上陆坡海底，有大片滑坡，其水深范围约在１８０－６５０ｍ之间，它们沿着陆架外缘坡折处呈北东－南西方向分布，其具体位置往往与古三角洲前缘的海底陡坎及古海岸线位置密切相关，大量浅层地震，旁侧声纳，底质取样分析和土体力学理论计算表明，本区滑坡主要是由于地形坡度，沉积物特性，土体自身重力，它们是区内海底很不稳定的地带，是一种重要的地灾害因素，在海洋工程地质设计和实施时     

海洋环境预报电视节目制作与回顾

作为海洋环境预报公益服务的窗口自开播至今,经历了20年的风风雨雨,海洋电视节目的内容从单一性的项目到海浪、海温、海冰、风暴潮、海水浴场综合性预报,电视视频信号从复合、分量信号到数字信号,通过光缆采用基带的方式传送视频信号到中央电视台.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

GPS数据采集技术及其在海洋调查中的应用

本文应用VB6．0开发了智能化的GPS数据采集软件．对该软件的功能进行了简单的介绍，同时对一些关键技术作了较详细的描述。利用该软件、GPS接收机及PC机的组合，可对走航式测量仪器(或移动设备)进行实时定位并保存定位记录，且大大减少一些不必要的数据，使得软件更为实用。     

Modelling linear wave transformation induced by dissipative structures—Random waves

The relevant theory is presented and numerical results are compared with the analytical solution for the interaction of non-breaking waves with an array of vertical porous circular cylinders on a horizontal bed. The extension to the cases of unidirectional and multidirectional waves is obtained by means of a transfer function. The influence of the mechanical properties of porous structures and wave irregularity on wave transformation is analysed. Results for unidirectional and multidirectional wave spectra are compared to those obtained for regular waves. The model presented reproduces well the analytical results and provides a tool for analysing several engineering problems.     

我国海水制盐工艺改革的设计研究

从技术上和工艺上的可能性、可行性和合理性，论证了海水制盐工艺改革的必要性，并且提出了实现海水制盐工艺改革的各种设计方案。它对我国的海水制盐工业的发展将具有深远意义。     

Heavy metals in marine sediments of Taranto Gulf (Ionian Sea, Southern Italy)

Al, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Ti and Zn concentrations have been determined in surface sediment samples collected in the Taranto Gulf (Ionian Sea, Southern Italy) in order to evaluate their levels and spatial distribution in this important area of the Mediterranean Sea. For various metals, the geoaccumulation index has been calculated as a criterion to assess if their concentrations represent contamination levels or can be considered as background levels. The results show that metals concentrations in sediments can be considered near the background levels found in the Mediterranean Sea.Analytical results have been elaborated by using a Geographical Information System (GIS) software to show metals accumulation areas. Using multivariate statistical analysis, we evaluate the possibility to distinguish the sampling stations, in relation to their geographical position. Results have showed metals distribution in the Taranto Gulf is principally influenced by industrial and urban wastes, located mostly in the northern coastal area of the Ionian Sea. Rivers in the Basilicata region and prevailing anticlockwise marine currents are further factors influencing metal accumulation in sediments.