深圳市地质灾害及防治技术

深圳市是一座新兴的海滨城市，市区东部与西部以花岗岩为主，中部以古老的变质岩为主，部分地区分布有砂岩、泥岩及变质的板岩、粉砂岩，深圳大断裂是区内主要的构造形迹。滑坡地质灾害主要分布在中部。在花岗岩地区主要变形为岩质高边坡崩塌、落石、坍塌等坡面变形；在变质岩、砂岩、泥岩地区发生多处滑坡。地质构造与地质灾害关系密切，深圳大断裂两侧为地质灾害多发区。防治边坡变形的工程措施即桩排、连续墙、基础为桩，锚杆框架；预应力锚索、预应力锚索框架护坡、预应力锚索抗滑桩，设置多级平台减载及琉干排水措施。深圳采用的治理地质灾害的工程措施经过多年的使用达到预期效果，但在上世纪90年代初完成的工程很少考虑工程措施与城市的景观协调。90年代后期已经考虑了工程完成后对城市环境的影响。因此采用防护措施以锚杆框架、预应力锚索框架工程为主，框架间植草，既有利于边坡稳定又有利于美化环境。     

Weibull分布的信息熵在地震预报中的应用研究

根据统计分布与信息熵理论，定义了震级信息熵Hm和地震间隔时间信息熵Ht，并推导了它们的计算公式。通过时空扫描和计算，发现强震前1～3年Hm和Ht出现低值异常，与地震有较好的对应关系，可以作为一组中期或中短期预测指标。     

甚宽频带数字地震仪震级偏差的初步研究

仅对高台地震台数字地震仪记录的震级与标准震级的偏差问题进行了分析。     

数字化测绘技术在城镇地籍测量中的应用

数字化测绘是目前较为流行的测量方式，其技术本身也日渐成熟。文章简述了数字化测绘技术在城镇地籍测量中作业流程、实施过程与地籍管理信息系统的建立过程。     

煤田火区烧变岩光谱特征分析及其信息提取

中国北方煤田煤层自燃现象非常严重.利用遥感手段可以快速实现火区的动态监测,及时为灭火工程提供信息.烧变岩作为火区的地表指示性特征,是火区解译最直观的信息.本文从烧变岩的反射光谱曲线特征入手,对几种提取烧变岩信息的方法进行比较,从而确定解译烧变岩的最佳方法,为圈定火区的范围和位置奠定基础.     

西南岩溶石山地区石漠化信息自动提取技术研究

介绍了以TM数据为信息源,基于GIS系统平台的矢量化石漠化信息计算机自动提取原理、方法、步骤及提取效果。     

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.     

Hazard Zoning for Landslides Connected to Torrential Floods in the Jerte Valley (Spain) by using GIS Techniques

The Jerte Valley is anortheast-southwest tending graben located in the mountainous region of west central Spain (Spanish Central System). Mass movements have been a predominant shaping process on the Valley slopes during the Quaternary. Present day activity is characterized as either `first-time failure' (shallow debris slides and debris flows) or `reactivations' of pre-existing landslides deposits.A delineation of landslide hazard zoningwithin the Valley has been carried out by using the detailed documentation of a particular event (a debris slide and a sequel torrential flood, which occurred on the Jubaguerra stream gorge), and GIS techniques. The procedure has had four stages, which are: (1) the elaboration of a susceptibility map (spatial prediction) of landslides; (2) the elaboration of a map of `restricted susceptibility' in the particular case of slopes that are connected to streams and torrents (gorges); (3) the elaboration of a digital model which relates the altitude to the occurrence probability of those particular precipitation conditions which characterized the Jubaguerra event and (4) the combination of the probability model with the `restricted susceptibility map', to establish `critical zones' or areas which are more prone to the occurrence of phenomena that have same typology as this one.     

数字摄像能见度观测系统中实用黑体技术的应用

在数字摄像能见度观测系统 (DPVS) 中, 目标物的自身亮度难以实时测量, 给观测结果带来的不确定性不可忽略, 采用实用黑体技术可以大大减小乃至消除其造成的误差。作者对非黑体目标引起的测量误差进行了分析, 结果表明相对误差随着目标物反射率的增加和能见度的升高而增大, 为了保证测量精度, 需要采用反射率足够低的目标物。对于长方体结构的实用黑体腔, 采用多次反射法计算了其近轴向的半球-方向反射率与其特性参数之间的关系。在没有观测到侧壁的前提下, 其轴向反射率最大, 随着偏离轴线角度的增加, 反射率逐渐减小。轴向反射率随腔体长度与开口边长比值的增加而迅速减小, 而腔体宽度增加引起的变化不明显。另外, 作者还推导了在考虑弥散成像时对实用黑体开口尺寸最小需求的计算公式, 也给出了符合一定条件的实用黑体轴向反射率的近似计算公式, 从而提供了DPVS中实用黑体参数选择的基本原则。最后, 给出了DPVS采用非黑体和实用黑体目标计算能见度的对比试验结果, 充分说明了在DPVS中采用实用黑体技术的必要性和可行性。     

MASS系统数据库的建立

根据地震数据资料的特点和系统服务功能的要求，采用当今先进的大型网络关系数据库模型构造了辽宁省数字遥测地震台网管理和服务系统数据库。本文对该数据库的总体设计和建立等做了较详细的介绍。