Quantification of karst aquifer discharge components during storm events through end-member mixing analysis using natural chemistry and stable isotopes as tracers

Karst aquifer components that contribute to the discharge of a water supply well in the Classical Karst (Kras) region (Italy/Slovenia) were quantitatively estimated during storm events. Results show that water released from storage within the epikarst may comprise as much as two-thirds of conduit flow in a karst aquifer following rainfall. Principal components analysis (PCA) and end-member mixing analysis (EMMA) were performed using major ion chemistry and the stable isotopes of water (δ¹⁸O, δ²H) and of dissolved inorganic carbon (δ¹³C_DIC) to estimate mixing proportions among three sources: (1) allogenic river recharge, (2) autogenic recharge, and (3) an anthropogenic component stored within the epikarst. The sinking river most influences the chemical composition of the water-supply well under low-flow conditions; however, this proportion changes rapidly during recharge events. Autogenic recharge water, released from shallow storage in the epikarst, displaces the river water and is observed at the well within hours after the onset of precipitation. The autogenic recharge end member is the second largest component of the well chemistry, and its contribution increases with higher flow. An anthropogenic component derived from epikarstic storage also impacts the well under conditions of elevated hydraulic head, accounting for the majority of the chemical response at the well during the wettest conditions.     

Review of the neotectonics of the Eastern Turkish–Armenian Plateau by geomorphic analysis of digital elevation model imagery

Digital elevation model (DEM) images provide synoptic views of the Earth’s surface allowing the analysis of landforms of still active tectonic and volcanic structures at regional scale. A DEM at 250 m pixel size constitutes regional scale data particularly efficient to investigate the late Miocene–Quaternary deformation of the Eastern Turkish–Armenian Plateau in the Arabian–Eurasian area of convergence. Geomorphic analysis of the DEM image associated with review of fault-plane solutions of earthquakes show that faults are mostly strike-slip with small vertical component. Here we show that the orientations of the tectonic and volcanic structures fit with a tectonic regime characterized by N–S shortening and E–W lengthening, consistent with westward escape of Anatolia perpendicular to the direction of the Arabia–Eurasia shortening. The uniform uplift of the plateau, the predominance of strike-slip faulting, the lack of major thrusts and the occurrence of normal faults do not support a model of going-on crustal thickening due to intracontinental convergence. On the contrary, our observations can be better interpreted in terms of lithospheric thinning and mantle upwelling related to gravity escape of Anatolia.     

陆相油藏中砂泥岩互层时移地震遮掩效应及其对时移地震资料解释的影响

从差异波形特征的角度出发,分析时移地震差异波形特征与砂泥岩互层油藏中油层速度变化的关系。通过建立由5层地层组成的楔形地质模型,运用褶积公式及时移地震求差公式,得到泥岩速度为2 400 m/s和砂岩速度为2 700m/s条件下,互层中砂岩速度变化±150 m/s的时移地震响应。研究结果表明:砂泥岩互层的差异波形是一个多峰复合波,泥岩夹层的厚度是决定差异波形特征的一个主要因素,并且存在一个临界值,即四分之一主波长;如果泥岩夹层的厚度小于这一临界值,就会发生遮掩效应,即顶部油层的时移地震响应可以掩盖中、下部油层的时移地震响应。     

基于GIS和GPS的中铁快运信息监控系统

基于地理信息系统、卫星定位系统、无线接入技术、大型数据库以及网络等技术,建立了一个中铁快运信息监控系统,实现了对快运车辆、人员的监控调度管理及车辆人员与监控中心的互动,形成了中心监控、网络调度和计算机管理的先进中铁快运模式。     

全数字摄影测量系统DEM生产的质量控制

目前,数字高程模型(DEM)在理论研究和实践应用方面都有了很大的进展,已在测绘、地质、农业、工程、建筑、军事、导航等多个领域得到了广泛应用,因此高效快捷地生产高精度的DEM是十分必要和迫切的。全数字摄影测量系统DEM生产方案是解决这一问题的有效途径,文章针对该系统的特点,提出了加强质量控制的策略和方法,并阐述了对一些实践问题的解决。     

香港DTM快速建立的研究

本文论述了建立1：5000香港DTM的基本过程，总结了在DTM生产实践中的技术和管理上所取得的一些经验，对生产中各环节的实际问题提出一些建议，对提高所建立DTM的精度与可用性及提高工作效率，具有一定的意义，为以后各种比例尺的DTM生产提供参考。     

层次化网络SCADA通讯模型及其应用

为在大型网络分布式SCADA（Super Control and Data Acquisition）应用系统中解决诸如电力、通信、石油、化工、制造业等行业或领域，在过程、流程、状态方面的数据监视、数据控制、数据采集与数据管理的高效、实时问题，解决各级子系统之间人工逐级汇接的问题，提高应用系统的稳定性、可维护性，这里提出了一种层次化网络SCADA通讯模型。该模型是通过在层次化网络SCADA模型中，引入基于TCP／IP协议的客户机／服务器查询方式数据通讯技术和点对点主动数据传递技术而建立的。根据该模型所设计的产品，经过生产实践证明，应用该模型可以较方便地构造分布在不同区域计算机上的SCADA系统，进行高效的实时通信。该模型为具有多层结构的大型分布式网络化集中SCADA系统的设计、开发，探索出了一条十分有效的新路径。     

鄂尔多斯盆地的三维可视化及其应用

地形三维可视化作为测绘行业的一项新技术正处于蓬勃发展阶段。本文以鄂尔多斯盆地为例，着重介绍了基于ARCGIS9．0的三维可视化建库、实现过程，并指出其在矿产勘探中的具体应用。     

测绘职业教育教学改革探讨

随着空间科学技术和计算机技术的发展，以“3S”技术为代表的测绘高新技术已普遍应用于测绘生产中。作为培养测绘实用型人才的测绘职业学校，测绘专业如何重新划分、测绘教育与教学内容如何改革，是测绘教育界普遍关注的问题，本文从教学的角度对有关问题进行了探讨。     

MODIS数据在乌鲁木齐地区植被景观动态监测中的应用

根据EOS／MODIS卫星时次高覆盖面广的特征，选取从4．10月的MODIS晴空资料，对整个乌鲁木齐地区植被景观进行动态监测，利用植被指数最大合成法制作了每月植被指数专题图。为了能够结合物候更好地分析乌鲁木齐地区植被随季节变化趋势以及不同时期植被生长状况，我们还制作了植被景观专题图及其变化评价图。评价图的优势在于能直观地反映植被变化的趋势，并能将变化的程度数字化，还可以根据不同的评价图叠加DEM做相应的分析。为乌鲁木齐地区植被变化研究提供有效的依据。