实测天然气扩散系数在地层条件下的校正

在研究天然气在地下岩石中扩散机理及扩散系数测试方法的基础上，指出了实测天然气扩散系数与地层条件下的差异，利用实测饱和水和干样条件下人造石英粉砂岩的扩散系数值的比值与其物性之间的关系，利用爱因斯坦方程产实测天然气扩散系数的饱和介质转换和温度校正方法，该方法的实际应用表明，校正结果符合地质规律，表明该校正方法是可行的。     

粘性土抗剪强度折算系数法的研究与应用

系统介绍了粘性土抗剪强度的特征，并分析了其组成。在此基础上针对基抗支护设计中粘性土抗剪强度的取值问题，提出了采用折算系数法对抗剪强度C值进行处理，并利用此方法进行了长春光大银行基坑的支护设计，取得了良好的效果。     

岩体与锚固体间粘结强度的确定

在预应力锚索设计参数的确定中，岩体与锚固体间粘结强度的确定是其十分重要的环节。现有的确定方法大多基于经验与现场试验的结合，费时费工，故有必要根据已有的试验资料确定一种定量方法。通过对国内30余例工程的统计分析表明，岩体与锚固体的粘强度不仅与岩石单轴抗压强度有关，还与内锚固段裂隙的分布与性质有关。通过室内外试验进一步建立了适合国内岩体质量指标确定的粘结强度经验公式与内锚段长度设计系数的图系，同时，也可为岩锚加固数值仿真提供经验判据。实例计算表明，所提供的确定方法与岩锚试验结果较为吻合。     

土体渗流固结参数识别方法

根据土体固结过程中超孔隙水压力观测资料，建立了基于遗传算法的土体渗流团结参数非线性识别方法，解决了经典高斯－牛顿极小化问题所存在的局部极小问题和最小二乘法所存在的当初始值选择不合适时迭代过程发散的问题，提出了根据观测仪器的精度，建立 工终止条件的方法，数值计算结果表明，本文所提出的非线性反演方法适合于土体团结参数识别等类似的反问题。     

新疆北部区域地球化学异常特征

对新疆北部区域地球化学基本特征－元素的丰度值、变化系数、元素在地层及侵入岩中的分布规律、元素共生组合、区域地球化学异常特征的研究，阐明了新疆北部区域上，不同时代地层及岩浆岩中元素及地球化学异常的变化规律。     

New imaging method for seismic reflection wave and its theoretical basis

Some new imaging formulas for seismic reflection wave and their theoretical basis are given. Phenomena of wave propagation should be characterized by instantaneous spectrum and expressed by complex function of three variables (time, space and frequency) in mathematics. Various physical parameters of medium are also complex functions of two variables (space and frequency). The relationship between reflection coefficient of medium and spectrum of reflected wave is given. Multi-reflection and filter of formations are considered in inversion formulas. Problems in classical convolution model and wave equation are illustrated. All these inversion formulas can be used to image underground medium by wavelet transform and method of “3-basic colors”. Different colors mean different media.     

Location and quantitative analysis of OH in coesite

 The incorporation of hydrogen (deuterium) into the coesite structure was investigated at pressures from 3.1 to 7.5 GPa and temperatures of 700, 800, and 1100 °C. Hydrogen could only be incorporated into the coesite structure at pressures greater 5.0 GPa and 1100 °C . No correlation between the concentration of trace elements such as Al and B and the hydrogen content was observed based on ion probe analysis (1335 ± 16 H ppm and 17 ± 1 Al ppm at 7.5 GPa, 1100 °C). The FTIR spectra show three relatively intense bands at 3575, 3516, and 3459 cm⁻¹ (ν₁ to ν₃, respectively) and two very weak bands at 3296 and 3210 cm⁻¹ (ν₄ and ν₅, respectively). The band at 3516 cm⁻¹ is strongly asymmetric and can be resolved into two bands, 3528 (ν_2a) and 3508 (ν_2b) cm⁻¹, with nearly identical areas. Polarized infrared absorption spectra of coesite single-crystal slabs, cut parallel to (0 1 0) and (1 0 0), were collected to locate the OH dipoles in the structure and to calibrate the IR spectroscopy for quantitative analysis of OH in coesite (ɛ _{i ,tot}=190 000 ± 30 000 l mol⁻¹ _H2O cm⁻²). The polarized spectra revealed a strong pleochroism of the OH bands. High-pressure FTIR spectra at pressures up to 8 GPa were performed in a diamond-anvil cell to gain further insight into incorporation mechanism of OH in coesite. The peak positions of the ν₁, ν₂, and ν₃ bands decrease linearly with pressure. The mode Grüneisen parameters for ν₁, ν₂, and ν₃ are −0.074, −0.144 and −0.398, respectively. There is a linear increase of the pressure derivatives with band position which follows the trend proposed by Hofmeister et al. (1999). The full widths at half maximum (FWHM) of the ν₁, ν₂, and ν₃ bands increase from 35, 21, and 28 cm⁻¹ in the spectra at ambient conditions to 71, 68, and 105 in the 8 GPa spectra, respectively. On the basis of these results, a model for the incorporation of hydrogen in coesite was developed: the OH defects are introduced into the structure by the substitution Si^4+(Si2)+4O²⁻= ^[4]□^(Si2) + 4OH⁻, which gives rise to four vibrations, ν₁, ν_2a, ν_2b, and ν₃. Because the OH(D)-bearing samples do contain traces of Al and B, the bands ν₄ and ν₅ may be coupled to Al and/or B substitution. Received: 19 December 2000 / Accepted: 23 April 2001     

兰州冬季气溶胶光学特性的参数化

兰州冬季气溶胶的谱分布用双谱模式拟合，即Junge谱加Deirmendjian谱；气溶胶的平均折射率为1.549-0.1i；气溶胶浓度随高度的分布根据天气条件取为高斯、均匀、指数分布三种类型。以此为基础，计算出兰州冬季气溶胶光学厚度的平均值。 经实测的气溶胶光学厚度与本文的计算值比较后发现，我们的参数化方案基本上是成功的。     

实际预报可预报性的时空依赖性分析

本文利用国家气象中心1990年1月1日至1992年2月29日的1～5 d、500 hPa高度场业务预报结果研究了不同球谐函数谱分量和经验正交函数(EOF)谱分量的可预报性。对球谐函数谱分量的研究表明可预报性并不是随着空间尺度的增加呈现单调的递减关系，主要表现为在总波数n等于5附近具有最大可预报性。可预报性主要依赖于总波数n，经卷大圆上的波数和纬向圆周上的波数对可预报性具有完全相同的重要意义。对EOF谱分量的分析表明，随着EOF指数(即序号数)的增大，可预报性依次减小。从EOF和球谐函数的关系发现前几个EOF分量正是对应着最可预报的球谐函数分量。进一步分析表明，最可预报的分量对应大气运动的慢变流型。这些结果对如何使用数值预报产品以及如何进行延伸预报具有重要意义。     

电磁辐射异常分析方法研究

利用河北省电磁台网１９８８～１９９２年的观测资料，对不同台站不同方向的异常映震能力进行了分析研究。并运用信息论方法计算了各台信息水平作为其信息可信度的权系数，对各台资料采用加权平均的方法进行了合成处理，发现比平时采用的等权平均效果要好。同时对其异常频次的累加合成对应地震的异常特征进行了初步的探讨