青藏高原河流网络高分CubeSat遥感监测

河流网络是地表水循环的重要组成部分,如何实现河流网络动态监测已成为河流遥感研究的热点。近年来,以PlanetScope为代表的CubeSat小卫星已具备了米级空间分辨率、1 d重访周期的优势,这为河流网络高时空分辨率动态监测提供了可能。本文以青藏高原长江源区的通天河流域（227 km²）为研究区,选取2017-05—2017-10 5期3 m空间分辨率CubeSat遥感影像,增强河流横纵剖面特征自动化提取了河流网络,研究了通天河流域河流网络动态变化,对比分析了3 m CubeSat与30 m Landsat 8、10 m Sentinel-2所提取的河流网络,以及5种现有水体数据集（GRWL,GSW,FROM-GLC 2017,OpenStreetMap,HydroSHEDS）。研究结果表明：（1）研究区内河流网络5月水系密度较低（0.38 km^-1）,7—8月河流网络进入丰水期,水系密度显著增加至0.61 km^-1,9月河流网络进入平水期,水系密度趋于平稳（0.53 km^-1）,随后迅速退化并于10月开始冻结,水系密度迅速降低至0.37 km^-1;（2）采用高空间分辨率CubeSat所提取的河流网络能够识别更多细小河流（河宽3—30 m）,CubeSat所提取的河流总长分别为Landsat 8、Sentinel-2所提取河流总长的1.6倍和1.3倍;（3）CubeSat所提取的河流网络水系密度高于现有水体数据集（2.9—12.4倍）,弥补了现有水体数据集无法反映细小河流的不足。     

Reflections on the history of research on large wood in rivers

Dynamics and functions of large wood have become integral considerations in the science and management of river systems. Study of large wood in rivers took place as monitoring of fish response to wooden structures placed in rivers in the central United States in the early 20th century, but did not begin in earnest until the 1970s. Research has increased in intensity and thematic scope ever since. A wide range of factors has prompted these research efforts, including basic understanding of stream systems, protection and restoration of aquatic ecosystems, and environmental hazards in mountain environments. Research and management have adopted perspectives from ecology, geomorphology, and engineering, using observational, experimental, and modelling approaches. Important advances have been made where practical information needs converge with institutional and science leadership capacities to undertake multi-pronged research programmes. Case studies include ecosystem research to inform regulations for forest management; storage and transport of large wood as a component in global carbon dynamics; and the role of wood transport in environmental hazards in mountain regions, including areas affected by severe landscape disturbances, such as volcanic eruptions. As the field of research has advanced, influences of large wood on river structures and processes have been merged with understanding of streamflow and sediment regimes, so river form and function are now viewed as involving the tripartite system of water, sediment, and wood. A growing community of researchers and river managers is extending understanding of large wood in rivers to climatic, forest, landform, and social contexts not previously investigated. © 2020 John Wiley & Sons, Ltd.     

The active layer in gravel-bed rivers: An empirical appraisal

The vertical position of the streambed–water boundary fluctuates during the course of sediment transport episodes, due to particle entrainment/deposition and bedform migration, amongst other hydraulic and bedload mechanisms. These vertical oscillations define a topmost stratum of the streambed (i.e. the ‘active layer or active depth’), which usually represents the main source of particles entrained during long and high-magnitude bedload transport episodes. The vertical extent of this layer is hence a capital parameter for the quantification of bedload volumes and a major driver of stream ecology in gravel-bed rivers. However, knowledge on how the active depth scales to flow strength and the nature of the different controls on the relation between the flow strength and the active depth is still scarce. In this paper we present a meta-analysis over active depth data coming from ~130 transport episodes extracted from a series of published field studies. We also incorporate our own field data for the rivers Ebro and Muga (unpublished), both in the Iberian Peninsula. We explore the database searching for the influence of flow strength, grain size, streambed mobility and channel morphology on the vertical extent of the active layer. A multivariate statistical analysis (stepwise multiple regression) confirms that the set of selected variables explains a significant amount of variance in the compiled variables. The analysis shows a positive scaling between active depth and flow strength. We have also identified some links between the active depth and particle travel distances. However, these relations are also largely modulated by other fluvial drivers, such as the grain size of the bed surface and the dominant channel macro-bedforms, with remarkable differences between plane-bed, step-pool and riffle-pool channels. © 2020 John Wiley & Sons, Ltd.     

Quantifying sedimentation patterns of small landslide-dammed lakes in the central Oregon Coast Range

Understanding sedimentation patterns in small coastal watersheds due to landscape perturbations is critical for connecting hillslope and fluvial processes, in addition to managing aquatic habitats for anadromous fish and other aquatic species in the Oregon Coast Range (OCR). Changes in sedimentation patterns spanning the last 250 years are preserved in two landslide-dammed lakes in small watersheds (< 10 km²) underlain by the Tyee Formation in the central OCR. Dendrochronology of drowned Douglas-fir stumps in both lakes provided precise timing of the damming and formation of the lakes, with Klickitat Lake forming in winter ad 1751/52 and Wasson Lake in winter ad 1819/20. Perturbations from wildfires, logging and road development, and previously underappreciated snow events affect sedimentation rates in the lakes to different degrees, and are identified in the sediment record using cesium-137 (¹³⁷Cs), high-resolution charcoal stratigraphy, local fire records, and aerial photography. Each lake has variable sedimentation accumulation rates (0.05–4.4 cm yr⁻¹) and mass accumulation rates (0.02–1.42 g cm⁻² yr⁻¹). Sedimentation rates remained low from the landslide-damming events until the mid-19th century, when they increased following stand-replacing wildfires. Aside from a sediment remobilization triggered by human modification of the landslide dam at Klickitat Lake around 1960, the largest peaks in mass accumulation rates in the mid-20th century at both lakes in the early 1950s precede major road construction and logging activity in the watersheds. Subsequent sedimentation rates are lower, but variable, and possible effects of logging and road development might be exacerbated by abnormal precipitation and heavy snow events. A comparison of previous studies of landslide-dammed lakes in larger watershed of the OCR are consistent with our findings of increased sedimentation in the mid-20th century, as well as higher sedimentation rates in the debris-flow dominated southern Tyee Formation than in the lower-relief northern Tyee Formation.     

Soil erosion and sediment transport in Tanzania: Part I – sediment source tracing in three neighbouring river catchments

Water bodies in Tanzania are experiencing increased siltation, which is threatening water quality, ecosystem health, and livelihood security in the region. This phenomenon is caused by increasing rates of upstream soil erosion and downstream sediment transport. However, a lack of knowledge on the contributions from different catchment zones, land-use types, and dominant erosion processes, to the transported sediment is undermining the mitigation of soil degradation at the source of the problem. In this context, complementary sediment source tracing techniques were applied in three Tanzanian river systems to further the understanding of the complex dynamics of soil erosion and sediment transport in the region. Analysis of the geochemical and biochemical fingerprints revealed a highly complex and variable soil system that could be grouped in distinct classes. These soil classes were unmixed against riverine sediment fingerprints using the Bayesian MixSIAR model, yielding proportionate source contributions for each catchment. This sediment source tracing indicated that hillslope erosion on the open rangelands and maize croplands in the mid-zone contributed over 75% of the transported sediment load in all three river systems during the sampling time-period. By integrating geochemical and biochemical fingerprints in sediment source tracing techniques, this study demonstrated links between land use, soil erosion and downstream sediment transport in Tanzania. This evidence can guide land managers in designing targeted interventions that safeguard both soil health and water quality.     

Sediment transport at the network scale and its link to channel morphology in the braided Vjosa River system

In this article we apply the CASCADE network-scale sediment connectivity model to the Vjosa River in Albania. The Vjosa is one of the last unimpaired braided rivers in Europe and, at the same time, a data scarce environment, which limits our ability to model how this pristine river might respond to future human disturbance. To initialize the model, we use remotely sensed data and modeled hydrology from a regional model. We perform a reach-by-reach optimization of surface grain size distribution (GSD) and bedload transport capacity to ensure equilibrium conditions throughout the network. In order to account for the various sources of uncertainty in the calculation of transport capacity, we performed a global sensitivity analysis. The modeled GSD distributions generated by the sensitivity analysis generally match the six GSDs measured at different locations within the network. The modeled bedload sediment fluxes increase systematically downstream, and annual fluxes at the outlet of the Vjosa are well within an order of magnitude of fluxes derived from previous estimates of the annual suspended sediment load. We then use the modeled sediment fluxes as input to a set of theoretically derived functions that successfully discriminate between multi-thread and single-thread channel patterns. This finding provides additional validation of the model results by showing a clear connection between modeled sediment concentrations and observed river morphology. Finally, we observe that a reduction in sediment flux of about 50% (e.g., due to dams) would likely cause existing braided reaches to shift toward single thread morphology. The proposed method is widely applicable and opens a new avenue for application of network-scale sediment models that aid in the exploration of river stability to changes in water and sediment fluxes.     

Babbling brook to thunderous torrent: Using sound to monitor river stage

The passive, ambient sound above the water from a river has previously untapped potential for determining flow characteristics such as stage. Measuring sub-aerial sound could provide a new, efficient way to continuously monitor river stage, without the need for in-stream infrastructure. Previous published work has suggested that there might be a relationship between sound and river stage, but the analysis has been restricted to a narrow range of flow conditions and river morphologies. We present a method to determine site suitability and the process of how to record and analyse sound. Data collected along a 500 m length of the River Washburn during July 2019 is used to determine what makes a site suitable for sound monitoring. We found that sound is controlled by roughness elements in the channel, such as a boulder or weir, which influences the sound produced. On the basis of these findings, we collect audio recordings from six sites around the northeast of England, covering a range of flow conditions and different roughness elements, since 2019. We use data from those sites collected during storms Ciara and Dennis to produce a relationship between this sound and river stage. Our analysis has shown a positive relationship between an R² of 0.73 and 0.99 in all rivers, but requires careful site selection and data processing to achieve the best results. We introduce a filter that is capable of isolating a river's sound from other environmental sound. Future work in examining the role of these roughness elements is required to understand the full extent of this technique. By demonstrating that sound can operate as a hydrometric tool, we suggest that sound monitoring could be used to provide cost-effective monitoring devices, either to detect relative change in a river or, after more research, a reliable stage measurement.     

Climate-change driven increased flood magnitudes and frequency in the British uplands: Geomorphologically informed scientific underpinning for upland flood-risk management

Upland river systems in the UK are predicted to be prone to the effects of increased flood magnitudes and frequency, driven by climate change. It is clear from recent events that some headwater catchments can be very sensitive to large floods, activating the full sediment system, with implications for flood risk management further down the catchment. We provide a 15-year record of detailed morphological change on a 500-m reach of upland gravel-bed river, focusing upon the geomorphic response to an extreme event in 2007, and the recovery in the decade following. Through novel application of two-dimensional (2D) hydrodynamic modelling we evaluate the different energy states of pre- and post-flood morphologies of the river reach, exploring how energy state adjusts with recovery following the event. Following the 2007 flood, morphological adjustments resulted in changes to the shear stress population over the reach, resulting in higher shear stresses. Although the proportion of shear stresses in excess of those experienced using the pre-flood digital elevation model (DEM) varied over the recovery period, they remained substantially in excess of those experienced pre-2007, suggesting that there is still potential for enhanced bedload transport and morphological adjustment within the reach. Although volumetric change calculated from DEM differencing does indicate a reduction in erosion and deposition volumes in the decade following the flood, we argue that the system still has not fully recovered to the pre-flood state. We further argue that Thinhope Burn, and other similarly impacted catchments in upland environments, may not recover under the wet climatic phase currently being experienced. Hence systems like Thinhope Burn will continue to deliver large volumes of sediment further down river catchments, providing new challenges for flood risk management into the future.     

Structural complexity influences the ecosystem engineering effects of in-stream large wood

Large wood (LW) is an ecosystem engineer and keystone structure in river ecosystems, influencing a range of hydromorphological and ecological processes and contributing to habitat heterogeneity and ecosystem condition. LW is increasingly being used in catchment restoration, but restored LW jams have been observed to differ in physical structure to naturally occurring jams, with potential implications for restoration outcomes. This article examines the structural complexity and ecosystem engineering effects of LW jams at four sites with varying management intensity incorporating natural and restored wood. Our results reveal: (i) structural complexity and volume of jams was highest in the site with natural jams and low intensity riparian management, and lowest in the suburban site with simple restored jams; and (ii) that structural complexity influences the ecosystem engineering role of LW, with more complex jams generating the greatest effects on flow hydraulics (flow concentration, into bed flows) and sediment characteristics (D₅₀, organic content, fine sediment retention) and the simplest flow deflector-style restored jams having the least pronounced effects. We present a conceptual model describing a continuum of increasing jam structural complexity and associated hydromorphological effects that can be used as a basis for positioning and evaluating other sites along the management intensity spectrum to help inform restoration design and best practice.     

Spatial and seasonal variability of sediment accumulation potential through controlled flooding of the beels located in the polders of the Ganges-Brahmaputra-Meghna delta of Southwest Bangladesh

The Ganges-Brahmaputra-Meghna (GBM) delta plain within Bangladesh is one of the most vulnerable to relative sea level rise (RSLR) in the world especially under current anthropogenically modified (i.e., embanked) conditions. Tidal river management (TRM) as practiced in coastal regions of Bangladesh may provide an opportunity to combat RSLR by raising the land level through controlled sedimentation inside beels (depression within embanked polders) with re-opening of polders. To date, TRM has been applied to tide-dominated coastal regions, but the potential applicability of TRM for the beels within the polders of river-dominated and mixed flow (MF) regimes remains to be assessed. We apply a calibrated 2D numerical hydromorphodynamic model to quantify sediment deposition in a beel flooded through breaching of the polder dike under conditions of river-dominated, tide-dominated and MF regimes for different seasons and applying different regulation schemes for the flow into the beel. Simulation results show considerable seasonality in sediment deposition with largest deposition during the monsoon season. The potential of controlled flooding is highest in the tide-dominated region, where sediment accumulation can be up to 28 times higher than in the river-dominated region. Regulating flow into a beel increases trapping efficiency, but results in slightly lower total deposition than without regulation. We conclude that re-establishing flooding of the beel within the polder without regulating the flow into the beel through breaching of the polder dike is a promising strategy for the mixed and tide-dominated flow regions in the delta as the sediment accumulation can raise the land surface at a higher rate than RSLR and effective SLR (ESLR). In the more upstream river-dominated section of the delta, accumulation rates would be much lower, but the pressure of sea level rise on these areas is lower as well. Owing to the abundant availability of sediment, application of controlled flooding like TRM therefore provides an opportunity to counteract the impact of RSLR and ESLR by means of land raising, particularly along the tidal river reaches in the GBM delta.