Monitoring the Kuroshio Extension with Dynamically Constrained Synthesis of the Acoustic Tomography, Satellite Altimeter and in situ Data

A finite-difference quasigeostrophic (QG) model of an open ocean region has been employed to produce a dynamically constrained synthesis of acoustic tomography and satellite altimetry data with in situ observations. The assimilation algorithm is based upon the 4D variational data interpolation scheme controlled by the model's initial and boundary conditions. The data sets analyzed include direct and differential travel times measured at the array of five acoustic transceivers deployed by JAMSTEC in the region of the Kuroshio Extension in 1997, Topex/Poseidon altimetry, CTD soundings, and ADCP velocity profiles. The region monitored is located within the area 27.5°–36.5°N, 143°–155°. The results of assimilation show that mesoscale variability can be effectively reconstructed by five transceivers measuring direct and reciprocal travel times supported by relatively sparse in situ measurements. The misfits between model and data lie within the observational error bars for all the data types used in assimilation. We have compared the results of assimilation with the statistical inversion of travel time data and analyzed energy balances of the optimized model solution. Energy exchange between the depth-averaged and shear components of the observed currents reveals a weak decay of the barotropic mode at the rate of 0.2 ± 0.7⋅10⁻⁵ cm²/s³ due to topographic interaction. Mean currents in the region are unstable with an estimate of the available potential energy flux from the mean current to the eddies of 4.7 ± 2.3⋅10⁻⁵ cm²/s³. Kinetic energy transition has the same sign and is estimated as 2.8 ± 2.5⋅10⁻⁵ cm²/s³. Potential enstrophy is transferred to the mesoscale at a rate of 5.5 ± 2.7⋅10⁻¹⁸ s⁻³. These figures provide observational evidence of the properties of free geostrophic turbulence which were predicted by theory and observed in numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

Spatial Modeling and Analysis for Shoreline Change Detection and Coastal Erosion Monitoring

Coastal erosion presents a serious problem throughout U.S. coastal areas. The Ohio Geological Survey estimates that more than 3,200 acres of Ohio's Lake Erie shore have been lost to erosion since the 1870s, resulting in economic losses exceeding tens of millions of dollars per year. This article presents research results of a project that monitors shoreline erosion using high-resolution imagery and examines erosion causes. Spatial modeling and analysis methods are applied to the project area along the south shore of Lake Erie. The shoreline is represented as a dynamically-segmented linear model that is linked to a large amount of data describing shoreline changes. A new method computes an instantaneous shoreline using a digital water level model, a coastal terrain model, and bathymetric data. This method provides an algorithm for deriving the Mean-Lower Low Water (MLLW) and the Mean High Water (MHW) shorelines that are essential to navigation charts. The results describe a part of our effort towards a coastal spatial information infrastructure to support management and decision-making in the dynamic coastal environment.     

Application of Microbial BOD Sensors in Marine Monitoring

A strain of yeast, which can endure high osmotic pressure, is employed for the sensitive material of the microbial BOD sensor. Two immobilization methods are used, I.e. Calcium alginate gel be ads and PV A gel beads. The results show that the PVA gel beads is better. The influences of osmosis and heavy metal ions on the yeast entrapped in the PVA gel beads are also studied in the experiment.     

Field measurements and monitoring of wastewater discharge in sea water

This paper reports a study of the field measurements and monitoring of wastewater discharge in sea water at Bari East (Italy). A wastewater sea outfall system is an integral and fundamental part of each wastewater treatment with ultimate sink in the sea water. The design of a water treatment plant and wastewater outfall must take into account the use of the environmental water, the values of physicochemical parameters to be respected in order to safeguard the use itself and the quality of the environmental water where wastewater is issued. In the present study measurements of sea current velocity components were carried out with a VM-ADP (Vessel-Mounted Acoustic Doppler Profiler). Salinity, wind directions and velocities were assessed with, for one survey, the total faecal coliforms and other biochemical parameters. It was emphasized that the measurements necessary for monitoring cannot be concentrated in the wastewater outfall pipe zone only, but should be extended to a neighbouring area of the outfall pipe, with an extension depending on the wastewater discharge, the polluting charge and the magnitude of the sea currents and the winds typical of the zone of interest. The analyses presented in this paper confirm that the sea zones close to the wastewater outfall pipe are particularly sensitive and vulnerable. Such results must be considered in the planning of a wastewater outfall pipe.     

动态基准实时测量系统的开发与应用

介绍了动态基准实时测量系统的硬件组成、站点上全站仪棱镜组合安装与检测方法、系统软件的开发及特点，最后对系统在广州地铁某地铁站结构变形自动监测中的应用情况进行了阐述。通过实际应用表明该系统能应用在自动化、高精度的变形监测领域。     

船舶机舱自动集中监测报警系统结构与功能分析

船舶机舱集中监测与报警系统目前已在船舶设计制造中得以广泛应用。对其组成、工作流程及功能进行了较为系统的阐述 ,为船舶使用者提供借鉴     

水下自航式海洋观测平台技术发展研究

水下自航式海洋观测平台是一种新型海洋观测平台，主要用于无人、大范围、长时间水下环境监测，包括物理学参数、海洋地质学和地球物理学参数，海洋化学参数、海洋生物学参数及海洋工程方面的现场接近观测。其特点是：成本低，环境适应性强，可冲破人工潜水极限而进入现场进行接近观测，免除了ROV需要水面支援母船的累赘，减少作业经费，体积小，使用方便，便于布放回收；可根据水声信号摇控或预置程序控制，按要求进行相关项目观测；有自主动力，水下运行时间相对较长，有源噪声低，可进行隐弊观测，正是基于以上的优点，近几年颇得海洋环境监测和海军方面的青睐，本文介绍了国际上水下自动观测平台的发展历史和现状，提出了我国开展研究水下自动观测平台的重要性及研究的面容。     

沉降监测多项式回归分析与神经网络预测

使用多项式和切比雪夫(Tchebyshev)多项式分别对沉降监测数据进行回归分析以预测未来沉降值,其中切比雪夫多项式的外推效果较好;应用前向BP神经网络对两种不同的单因子输入模式进行非线性函数逼近,并进行了不同采样步长的比较,实例表明将时间点作为网络的输入对沉降进行预测效果较好。     

A New Fall-Rate Equation for T-5 Expendable Bathythermograph (XBT) by TSK

The accuracy of the manufacturer’s fall-rate equation for the T-5 Model of expendable bathythermograph (XBT) has been investigated based on about 300 collocated pairs of XBT-CTD (Conductivity-Temperature-Depth profiler) measurements in various climatological regions. We found that the equation systematically overestimates depth by about 5% for the T-5 produced by Tsurumi Seiki, Co. Ltd. (TSK), but almost no bias is associated with the T-5 produced by Sippican, Inc., in USA. The cause of this difference is not clear, because the two manufacturers’ T-5 probes are reported to have identical shape and weight in water. We propose a new fall-rate equation for the TSK T-5: z(t) = 6.54071t - 0.0018691t ², where z(t) is depth in meters at time, t, in seconds.