轻便式浪高仪研制

运用计算机控制技术对轻便式浪高仪进行工程设计。论述了CPU控制板、控制板程序、数据处理软件的设计方法。     

卫星跟踪浮标和卫星遥感海面高度中的南海涡旋结构

选择4个南海卫星跟踪Argos漂流浮标及同期的TOPEX／Poseidon卫星遥感海面高度资料，研究了南海海域涡旋的活动及空间结构。这4个Argos漂流浮标的轨迹除了基本符合各季节海盆尺度环流趋势外，分别在菲律 宾以西、越南外海、南海中部等海域呈现出中尺度旋转轨迹。这些尺度涡旋现象在同期的TOPEX卫星遥感海面高度异常（SSHA）分布中得到了准确印证，并在诊断得到的地转流场中对应了一系列瞬变的中尺度涡旋运动。     

Theoretical and experimental analysis of tethered buoy instability in gravity waves

The motion of a tethered spherical buoy subjected to incident regular waves was measured in a wave tank. Transverse instability was observed when the period of the wave generated was close to one-half of the natural period of the buoy. The transverse instability confirmed as Mathieu type was predominant at the surface but diminished with increase in the depth of submergence. The stable and unstable zones were determined on the Mathieu's instability diagram. Experimental results were in agreement with the predicted zone of instability for a two degree of freedom oscillation problem of Mathieu type which has a periodically varying spring constant.     

状态空间模型在海洋波能转换系统中的应用 Ⅱ.单个矩形振荡浮子装置运动受力分析的解析方法

对线性入射波作用下的矩形振荡浮子运动受力分析给出了一种新的解析方法.对该方法首先采用特征函数展开法得到绕射速度势的一种新解析式,然后直接由绕射势和入射势来计算波浪激励力.与经典方法相比可以看出,对于立面二维问题,由于绕射势和辐射势的计算量相当,因此该方法比过去常用的解析法更为简单.为了验证方法的正确性,采用该方法对过去文献介绍的经典算例进行了计算,得到了与过去方法完全一致的结果,从而证明该方法是正确的.     

碟形浮标观测方向波谱误差分析及修正

改进了方向波谱的分析方法及噪声谱经验公式，使本法随测波环境及仪器特性自动修正经验参值，更易于实际应用。基于Maximum heave/pitch quad-spectrum method，由时域及频率域上的浮标动力反应数值计算，推求反应增益因子及相位延迟项，并进一步将其导入方向波谱计算，使其能修正资料浮标对波浪之轴不对称动态反应所造成的相位延迟不一致及主波向误差。经数值仿真验证，该方法的确能消减因资料浮标对波浪之轴不对称动态反应所造成的相位延迟及对主波向估算所造成之影响。应用花莲现场观测资料验证改良之主波向估算方法，得出是否考虑波浪运动与浮标运动间之振幅响应因子及相位延迟因子，所得之主波向的差异介于0－12℃之间。     

Absolute Calibration of Jason-1 and TOPEX/Poseidon Altimeters in Corsica

The double geodetic Corsica site, which includes Ajaccio-Aspretto and Cape Senetosa (40 km south Ajaccio) in the western Mediterranean area, has been chosen to permit the absolute calibration of radar altimeters. It has been developed since 1998 at Cape Senetosa and, in addition to the use of classical tide gauges, a GPS buoy is deployed every 10 days under the satellites ground track (10 km off shore) since 2000. The 2002 absolute calibration campaign made from January to September in Corsica revealed the necessity of deploying different geodetic techniques on a dedicated site to reach an accuracy level of a few mm: in particular, the French Transportable Laser Ranging System (FTLRS) for accurate orbit determination, and various geodetic equipment as well as a local marine geoid, for monitoring the local sea level and mean sea level. TOPEX/Poseidon altimeter calibration has been performed from cycle 208 to 365 using M-GDR products, whereas Jason-1 altimeter calibration used cycles from 1 to 45 using I-GDR products. For Jason-1, improved estimates of sea-state bias and columnar atmospheric wet path delay as well as the most precise orbits available have been used. The goal of this article is to give synthetic results of the analysis of the different error sources for the tandem phase and for the whole studied period, as geophysical corrections, orbits and reference frame, sea level, and finally altimeter biases. Results are at the millimeter level when considering one year of continuous monitoring; they show a great consistency between both satellites with biases of 6 ± 3 mm (ALT-B) and 120 ± 7 mm, respectively, for TOPEX/Poseidon and Jason-1.     

改进波浪发电浮标性能的试验研究

为了改进波浪发电浮标为性能，以及推广使用，使之能适用于波浪周期短波高小的海区，对上海航标厂的波浪发电浮标为浮体进行了试验研究。试验测量了气室压力、内波高、浮体升沉等物理量。通过输出功率的比较，提出了浮体设计方案的建议。     

Argo剖面浮标的检测及其施放探讨

Argo剖面浮标是一种新颖的海洋观测设备 ,它的抛弃式测量特性决定了对其检测和正确施放的重要性。为了确保 Argo剖面浮标在海上长期 (4～ 5 a)工作 ,并能获得可靠的观测资料 ,本文对 Argo浮标的检测和海上(调查船 )施放步骤作了详尽介绍 ,以供借鉴。     

Experimental Research of Resistance on Deep Sea Buoys and Mooring Systems

- In this paper a series of model experiments of resistance on buoys and mooring system components are described. The experiments include: experiments of hydrodynamic resistance on buoys and mooring system components, and experiment of air resistance on buoys in wind tunnel. The results are compared with the Beto's results (1980) and some analyses are conducted. The experimental results provide a reliable basis and some parameters for the design of deep sea mooring systems.     

波浪能振荡浮子转换方式实验装置的研究与设计

针对阵列式振荡浮子波浪能转换设备,提出一种在实验室进行测试研究的实验装置。该实验装置由一组阵列柱形水槽组成,水槽液面在水动力系统的驱动下,按照计算机设定的函数做升降运动;对该装置模型——柱形阵列水槽的假设,依据波浪理论进行了论证;对装置的工作原理、结构设计、技术参数、控制电路和操作运行等做了较详细的说明;对实验装置实际运行和测试情况做了介绍。结果表明:该实验装置设计合理可行,模拟波浪高度,远高于现有的造波水池,构成了一种专用的模拟造波装置;该装置为不同形式振荡浮子式波浪能转换设备的研制提供了一种多功能、大振幅、高效灵活的实验平台。