基于GIS的白龙江流域舟曲—武都段的滑坡危险性评价

本研究以围绕着白龙江流域的甘肃省南部的宕昌县、舟曲县和武都区部分地区为研究区,根据全国滑坡编目中得到的272个历史滑坡数据以及选取的高程、坡度、坡向、平面曲率、剖面曲率、归一化植被指数（NDVI）、降雨、岩性、距道路距离和距河流距离10种影响因子,利用三种具有代表性的定量方法：信息量模型、以及基于频率比模型的逻辑回归模型和人工神经网络模型对研究区内滑坡灾害危险性进行评价。三种评价结果均显示研究区内滑坡灾害的极高和高危险区主要沿白龙江河谷地区呈带状分布。从危险性分区图可看出,人工神经网络模型得到的分区图较为合理,既表现出沿河谷地区集中分布的趋势,也呈现出对滑坡历史数据较为独立的特征,这一研究结果与前人研究结果一致。根据受试者工作特征曲线（ROC曲线）对三种模型的精度进行检验,检验得到的AUC值分别为0.818、0.829和0.837,说明三种评价结果均具有较高的可靠性,基于频率比模型的人工神经网络模型相比其他两个模型具有更好的评价精度,能更好地进行滑坡危险性的预测和评价,其中高程、降雨、岩性以及距道路距离对评价结果影响更大,这四种影响因子重要性值占比为52.1%。为该地区的城市扩建与灾害预防预测提供了参考。     

“Basin scale” versus “localized” pore pressure/stress coupling - Implications for trap integrity evaluation

In petroleum industry, the difference between pore pressure (P_p) and minimum horizontal stress S_h (termed the seal or retention capacity) is of major consideration because it is often assumed to represent how close a system is to hydraulic failure and thus the maximum hydrocarbon column height that can be maintained. While S_h and P_p are often considered to be independent parameters, several studies in the last decade have demonstrated that S_h and P_p are in fact coupled. However, the nature of this coupling relationship remains poorly understood. In this paper, we explore the influences of the spatial pore pressure distribution on S_h/P_p coupling and then on failure pressure predictions and trap integrity evaluation. With analytical models, we predict the fluid pressure sustainable within a reservoir before failure of its overpressured shale cover. We verify our analytical predictions with experiments involving analogue materials and fluids. We show that hydraulic fracturing and seal breach occur for fluid pressure greater than it would be expected from conventional retention capacity. This can be explained by the impact of the fluid overpressure field in the overburden and the pressure diffusion around the reservoir on the principal stresses. We calculate that supralithostatic pressure could locally be reached in overpressured covers. We also define the retention capacity of a cover (RC) surrounding a fluid source or reservoir as the difference between the failure pressure and the fluid overpressure prevailing in shale at the same depth. In response to a localized fluid pressure rise, we show that the retention capacity does not only depend on the pore fluid overpressure of the overburden but also on the tensile strength of the cover, its Poisson’s ratio, and the depth and width of the fluid source.     

Evolution of polycyclic alkanes in the Espirito Santo Basin

The distributions of polycyclic alkanes were monitored in a Neocomian sequence (well 1-ESS-34) from the Espirito Santo Basin, southeast Brazil. The profiles included, apart from regular hopanes, significant concentrations of 18α(H), 28,30-bisnorhopane and subordinate amounts of gammacerane. Sterane concentrations, normally with hopane/sterane <5, were compatible with other geochemical data indicating a predominantly planktonic/microbial source of the deposited organic matter. Sample maturities ranged from very immature to the onset of oil generation, allowing biomarker distributions to be followed along a broad maturation range. The ability of certain molecular ratios (e.g. C₂₇ 17α(H)/17β(H)hopanes) to reflect a maturity sequence with depth in the closely-spaced strata of the immature upper levels (Jiquiá Stage) showed the value of molecular techniques over classical geochemical methods (e.g. vitrinite reflectance) for the study of immature sequences. The presence in the oils of southern Espirito Santo of 28,30-bisnorhopane, gammacerane and methyl steranes in similar concentrations as in extracts of the deepest levels of the 1-ESS-34 well qualify the Jiquia Stage as the probable source rock of oils accumulated in the basin.     

塔里木盆地寒武系—奥陶系白云岩稀土元素特征及其成因意义

塔里木盆地寒武系—奥陶系白云岩是重要的油气储集层,按能反映成因的结构构造特征将其分为4类,即泥晶—粉晶白云岩、藻纹层白云岩、斑状白云岩及重结晶白云岩。通过分析各类白云岩的稀土元素组成特征,并结合岩石学研究,探讨了各类白云岩成岩流体性质及其水岩比的相对大小。4类白云岩的ΣREE差别较大,但稀土元素配分模式均具LREE轻微富集、HREE亏损、Eu负异常且与海相泥晶灰岩相似的特征,其稀土元素配分模式主要受海水的影响。4类白云岩经受的成岩作用差别明显,但REE迁移行为类似,无明显分馏。泥晶—粉晶白云岩中ΣREE平均值为51.55×10-6,与泥晶灰岩相近,其ΣREE主要受控于原岩,受后期成岩作用的影响相对较小,其成岩过程的水岩比较小。藻纹层白云岩的ΣREE平均值为21.37×10-6,不及海相泥晶灰岩的1/2;岩石学及地球化学资料反映其成因与藻类密切相关,其低ΣREE可能是由ΣREE极低的藻类参与白云岩化所致,后期成岩改造作用对其影响并不明显。斑状白云岩的ΣREE平均值为28.89×10-6,远低于泥晶灰岩及泥晶—粉晶白云岩,反映其白云岩化过程的水岩比远高于泥晶—粉晶白云岩。重结晶白云岩的ΣREE平均值为13.64×10-6,不及泥晶灰岩的1/4,在4类白云岩中最低,岩石学特征表明此类白云岩经受了白云岩化及后期强烈重结晶2期主要成岩作用,而这2期成岩作用均需极高的水岩比,此类白云岩的稀土元素组成特征主要是这2期成岩作用叠加的结果,其低ΣREE值可能是大量ΣREE含量极低的成岩流体改造的结果。     

Impacts of Depositional Facies and Diagenesis on Reservoir Quality: A Case Study from the Rudist-bearing Sarvak Formation, Abadan Plain, SW Iran

An integrated geological-petrophysical analysis of the rudist-bearing sequence of the Cretaceous Sarvak Formation is given one giant oilfield, and provides an improved understanding of this main reservoir in the Abadan Plain, in the Zagros Basin, SW Iran. The main objective of this study is to evaluate reservoir potential of the Sarvak Formation, and then to utilize the calibrated well log signature to correlate reservoir potential in un-cored wells. Eight main facies are recognized and categori...     

一次强烈发展西南低涡的中尺度结构分析

2021年8月7—8日,四川盆地中东部出现大暴雨、局地特大暴雨,是重庆2021年度社会影响最大的一次暴雨过程。采用多源观测及ERA5再分析资料,对此次大暴雨过程进行诊断分析。结果表明：大暴雨发生在低槽移入四川盆地诱发暖性西南低涡背景下,具有显著的阶段性、跳跃性和极端性特征。大暴雨先后形成于西南低涡中心东南部、西南低涡东侧和西南低涡南侧暖湿的边界层辐合线附近。各阶段大暴雨均由移动缓慢、维持时间达3~6 h的β中尺度对流系统影响形成,暖湿不稳定和弱垂直风切变为β中尺度对流系统的形成提供了有利的环境条件。涡度分析表明,西南低涡的发展主要源于低空辐合及垂直涡度输送效应,但暴雨区的正涡度发展与西南低涡并不完全相同,水平涡度倾侧效应较为显著。第一阶段暴雨区正涡度主要源于对流层中低层西南低涡中心附近显著的低空辐合、涡度垂直输送及水平涡度倾侧效应;第二阶段和第三阶段暴雨区正涡度主要源于边界层辐合及边界层以上的水平涡度倾侧效应,边界层辐合触发暖湿大气中的中尺度对流活动促进了第二阶段和第三阶段大暴雨的形成。

     

新疆准噶尔盆地中侏罗世斯卡布勒果(Scarburgia)一新种

报道在新疆准噶尔盆地白杨河地区中侏罗世西山窑组首次发现的松柏类斯卡布勒果属(Scarburgia)的一个新种—白杨河斯卡布勒果(新种)。新种以果穗附属物(大孢子叶)紧密螺旋状排列、大孢子叶柄以宽角从轴上伸出、卵圆形种鳞的鳞片的顶端上卷、并具一短尖头等特征区别于斯卡布勒果属已知种。由于斯卡布勒果属以往在中国发现较少且时代大多为早白垩世,当前新种的发现是中国侏罗纪斯卡布勒果属化石的新记录。     

南海琼东南盆地新生代构造层序研究

基于南海琼东南盆地到目前为止还没有一个统一的构造层序划分方案的问题,在前人研究工作基础上,通过大量的二维地震构造层序闭合解释,从地震不整合面和构造发育特征识别出发,对新生代主要构造层序进行详细解剖。进一步结合对南海北部琼东南盆地新生代二维地震数据的精细综合分析,重新厘定了其新生代构造层序,并进行了构造层序的识别和划分。结果表明：按古构造运动面可将盆地充填序列划分为上、中、下三个构造层序,分别对应于盆地演化的三个阶段性。着重论述了三个构造层序的结构特征、叠加构造样式、构造层序发育特征、层序分布特征、沉积体系类型和盆地断裂演化序列之间的关系等,以期为今后的研究奠定基础。     

珠江口盆地前新生代先存断裂特征及动力背景

前人针对珠江口盆地前新生代开展过大量研究,但对盆地的原始构造格局仍缺乏统一认识。在高精度三维地震资料的基础上,笔者采用“定性+定量”先存断裂综合识别技术,识别出珠江口盆地惠州凹陷和番禺4洼前新生代基底发育的先存断裂583条。按照断裂是否断穿Tg和断裂倾角大小,将先存断裂分为4类：高角度节理、低角度节理、高角度活化断层和低角度活化断层;按断裂走向划分,将先存断裂分为NW-NWW向和NE-NEE向2组。燕山期晚侏罗—早白垩世,古太平洋板块对华南板块沿NW向正向俯冲,形成NE-NEE向逆冲断裂;燕山期晚白垩世,古太平洋板块对华南板块斜向俯冲产生左旋挤压应力场导致NW-NWW向逆冲断裂形成。这些先存断裂从源头上控制了珠江口盆地的构造格局,为研究盆地后续演化提供了重要支撑。     

松辽盆地反转期的界定

松辽盆地的构造反转对油气生成、运移和聚集保存有明显的控制作用.以往的研究认为,松辽盆地晚期经历了嫩江组沉积末期、明水组沉积末期和古近纪的多期反转.通过对松辽盆地北部进行剖面与平面的构造演化分析,认为嫩江组沉积末期为南北向差异升降活动,未引起地层褶皱变形和构造格局的改变,该期形成了区域伸展不整合面;明水组沉积末期松辽盆地从区域拉张转为挤压,盆地表现为东西向缩短,构造格局发生了性质上的变化,形成了一系列反转构造,该期构造反转奠定了盆地现今的构造格局.构造物理模拟实验进一步证明,松辽盆地不同方向的反转构造带为明水组沉积末期形成的.