山东焦家金成矿带三维地质建模及成矿预测

以山东焦家金成矿带为研究对象,将焦家金矿带的二维地质资料有效整合,应用三维建模软件Surpac,首次建立了该矿区的三维数字矿山模型.以此模型为基础,以地质统计方法为手段,分析成矿规律,建立找矿模型.成矿预测中利用“立方体预测模型”找矿方法、找矿信息量法和证据权法来预测资源量,按照信息值的等级依次圈定了6个成矿靶区.用体积估计法和丰度值估计法2种完全不同的计算方法来预测资源量,2种方法得到的找矿靶区资源量均约为380 t,说明计算的结果具有一致性和稳定性.     

三维技术在新疆若羌坡一镍矿找矿预测中的运用

新疆若羌北山地区坡—镍矿为近期发现、评价的超大型岩浆硫化物型铜镍矿床,目前已查明的镍金属资源量达130万t.由于坡北地区岩浆活动频繁,岩相组成复杂,认为坡一成矿岩体为早二叠形成的复式岩体.通过对坡一镍矿岩相学、岩石学的对比研究,总结出各岩相的时空关系,甄别出主要成矿岩体,并结合各岩相所反映出的地球物理特征,建立了三维地质模型及物理模型.通过对比研究,指明坡一镍矿下一步找矿方向,通过三维预测对找矿远景进行了探讨.     

陕北延安“7.3暴雨”诱发地质灾害主要类型与特征

2013年7月3日以来,陕西延安地区百年不遇的持续性强降雨,引发了大量的崩塌、滑坡、泥流地质灾害,造成严重的财产损失和人员伤亡。通过野外实地调查,对本次持续性强降雨诱发大范围地质灾害的主要类型和特征进行了较为系统的研究。研究表明,本次持续性强降雨引发的地质灾害共计8 000余处,灾害类型主要有崩塌、滑坡和泥流,分别以小规模黄土崩塌、浅表层黄土滑坡、坡面型黄土泥流为主,以及上述灾种链生转化形成的沟谷型泥流。在持续降雨条件下,多灾种转化而成的复合型灾害是造成人员伤亡和财产损失的主要类型。     

“平、剖面三维联动编辑”的实现途径

基于对平、剖面三维联动编辑的概念、动因的探讨及相关研究成果的认识,提出了平、剖面三维联动编辑的几何原理与实现途径,如:地质曲面的表达、基于等高线的曲面构建、剖面图的构建、以及平面图与剖面图的联动修改方法。并对三维地质建模的需求、矿产资源勘探应提交的三维地质模型、三维地质建模的数据标准以及广义的三维联动编辑等问题进行了延伸讨论。认为平、剖面三维联动编辑可能成为三维建模软件推广应用中的"杀手级应用"。     

淮南煤田潘三煤矿4-2煤中矿物对岩浆侵入的响应

以淮南煤田潘三煤矿4-2煤层中的岩浆岩、天然焦和煤样品为研究对象,利用X射线衍射仪和X射线荧光光谱仪测试其矿物组成和主量元素含量,研究地下岩浆侵入对煤中矿物成分的影响。结果表明:煤变质成天然焦后,其总的矿物含量增多,并伴随着后生矿物如微斜长石和镁绿泥石的出现。天然焦中后生矿物的组成元素可能来源于岩浆或热液中的主量元素如Si、Al、Na、K、Fe和Mg。     

云南省江城地区盐盆地重力勘探与深部找钾启示

云南省江城勐野井钾盐矿是目前我国发现的唯一固体钾盐矿。该地区地质构造复杂,近几年通过野外地质、地球物理及钻井勘探 ,认为钾盐来自深部侏罗系,并沿断裂构造带挤压塑流到表层,可能在深部还存在大面积的“盐源”。为实现找矿突破,亟须了解控制盐矿形成的构造及围岩的三维结构特征。通过对江城地区高精度重力数据位场分离、边缘检测、3D物性反演的地球物理处理与解释,获得了勐野井地区江城湖盆的基底变化、断裂展布等地质信息,确定了研究区构造格架、地下密度体的三维分布与岩盐矿的关系,推断在勐野井矿区西北深部可能还有侏罗系盐岩甚至钾盐的存在,该地区将是未来找矿工作的重点。研究成果为江城地区下一步钾盐矿勘查提供了线索和依据。     

Assessment of soil–pile–structure interaction influencing seismic response of mid-rise buildings sitting on floating pile foundations

The role of the seismic soil–pile–structure interaction (SSPSI) is usually considered beneficial to the structural system under seismic loading since it lengthens the lateral fundamental period and leads to higher damping of the system in comparison with the fixed-base assumption. Lessons learned from recent earthquakes show that fixed-base assumption could be misleading, and neglecting the influence of SSPSI could lead to unsafe design particularly for structures founded on soft soils. In this study, in order to better understand the SSPSI phenomena, a series of shaking table tests have been conducted for three different cases, namely: (i) fixed-base structure representing the situation excluding the soil–structure interaction; (ii) structure supported by shallow foundation on soft soil; and (iii) structure supported by floating (frictional) pile foundation in soft soil. A laminar soil container has been designed and constructed to simulate the free field soil response by minimising boundary effects during shaking table tests. In addition, a fully nonlinear three dimensional numerical model employing FLAC3D has been adopted to perform time-history analysis on the mentioned three cases. The numerical model adopts hysteretic damping algorithm representing the variation of the shear modulus and damping ratio of the soil with the cyclic shear strain capturing the energy absorbing characteristics of the soil. Results are presented in terms of the structural response parameters most significant for the damage such as foundation rocking, base shear, floor deformation, and inter-storey drifts. Comparison of the numerical predictions and the experimental data shows a good agreement confirming the reliability of the numerical model. Both experimental and numerical results indicate that soil–structure interaction amplifies the lateral deflections and inter-storey drifts of the structures supported by floating pile foundations in comparison to the fixed base structures. However, the floating pile foundations contribute to the reduction in the lateral displacements in comparison to the shallow foundation case, due to the reduced rocking components.     

Numerical study of the 3D failure envelope of a single pile in sand

The paper presents a comprehensive study of the failure envelope (or capacity diagram) of a single elastic pile in sand. The behavior of a pile subjected to different load combinations is simulated using a large number of finite element numerical calculations. The sand is modeled using a constitutive law based on hypoplasticity. In order to find the failure envelope in the three-dimensional space (i.e. horizontal force H, bending moment M and vertical force V), the radial displacement method and swipe tests are numerically performed. It is found that with increasing vertical load the horizontal bearing capacity of the pile decreases. Furthermore, the presence of bending moment on the pile head significantly influences the horizontal bearing capacity and the capacity diagram in the H–M plane manifests an inclined elliptical shape. An analytical equation providing good agreement with the 3D numerical results is finally proposed. The formula is useful for design purposes and the development of simplified modeling numerical strategies such as macro-element.     

塔河油田6~7区孔洞型碳酸盐岩储层建模

塔河油田6~7区奥陶系碳酸盐岩储层受岩溶作用影响,非均质性极强。因此,准确地刻画储集体的形态及三维空间展布对油气田的勘探开发至关重要。在对研究区奥陶系缝洞型碳酸盐岩储层纵向发育规律的认识的基础上,首次提出采用"多点统计学"进行储集相建模的基本思路。根据地震属性与孔洞型储层之间的对应关系优选"特征属性",建立基于"特征属性"的"训练图像";以钻井、地震识别以及测井解释成果作为硬数据,地震波阻抗的溶洞发育概率体作为软数据,进行"储集相"模拟。结果表明:该方法不仅实现了对孔洞型储集体形态的模拟,而且再现了孔洞型储集体的复杂结构及空间分布,同时模拟结果与该类型储集体的纵向发育规律相符。     

澳大利亚三维地质填图进展与实例

三维地质填图是目前国际上实现深部找矿勘查突破的重要途径,其通过对多元数据的集成,将不同学科、不同尺度的数据在三维空间中进行分析和对比,展示研究区地质体、构造之间的空间、成因和演化关系,有助于理解成矿系统和开展流体模拟,进而预测深部找矿靶区。本文从三维地质填图的概念出发,介绍了三维地质填图的工作流程和常用的工作平台。结合澳大利亚三个三维地质填图实例,介绍了三维地质填图在成矿带、油气和水资源领域中的应用和进展。通过对澳大利亚三维地质填图的综合分析,提出了对我国开展三维地质填图工作启示和建议。