面向国土资源调查的地理信息系统集成方案研究

分析国内外国土资源调查中GIS方法研究和应用的现状和趋势 ,提出基于多层次GIS集成的国土资源大调查思路 ,介绍和总结在大调查中应该关注的地理信息系统方法和应用。同时指出我国国土资源大调查的重点在开展微型化嵌入式GIS、三维 /四维GIS、网络GIS等方面的研究。     

SO4^2—、NO3^—对氯同位素测定的干扰及其消除

在石墨存在下用正热电离质谱法测定 Cs2 Cl+正离子是氯同位素测定的最佳方法 ,但实验过程中发现 ,SO42 - 和 NO3- 的存在对测定的干扰较严重。在系统地研究了 SO42 - 和 NO3- 对氯同位素测定影响的基础上 ,定性地给出了在 SO42 -和 NO3-影响下 ,部分仪器聚焦参数的变化 ,并对影响的机理做了一些解释。着重探讨了不产生影响的 SO42 - 和 NO3- 的最高浓度及 SO42 - 和 NO3- 的消除方法 ,以期指导相关的工作     

Three-dimensional Q structure in Jiashi earthquake region of Xinjiang

3-D S-waveQ structure in Jiashi earthquake region is inverted based on the attenuation of seismic waves recorded from earthquakes in this region in 1998 by the Research Center of Exploration Geophysics (RCEG), CSB, and a rough configuration of deep crustal faults in the earthquake region is presented. First, amplitude spectra of S-waves are extracted from 450 carefully-chosen earthquake records, called observed amplitude spectra. Then, after instrumental and site effect correction, theoretical amplitude spectra are made to fit observed amplitude spectra with nonlinear damped least-squares method to get the observed travel time overQ, provided that earthquake sources conform to Brune’s disk dislocation model. Finally, by 3-D ray tracing method, theoretical travel time overQ is made to fit observed travel time overQ with nonlinear damped least-squares method. In the course of fitting, the velocity model, which is obtained by 3-D travel time tomography, remains unchanged, while onlyQ model is modified. When fitting came to the given accuracy, the ultimateQ model is obtained. The result shows that an NE-trending lowQ zone exists at the depths of 10–18 km, and an NW-trending lowQ zone exists at the depths of 12–18 km. These roughly coincide with the NE-trending and the NW-trending low velocity zones revealed by other scientists. The difference is that the lowQ zones have a wider range than the low velocity zones. Foundation item: Joint Seismological Science Foundation of China (957-07-414) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200105, Research Center of Exploration Geophysics, China Seismological Bureau.     

冷家沙三段砂岩成岩序列与孔隙演化

笔者以辽河盆地冷家地区冷94井为例，通过铸体薄片、电镜扫描、能谱 阴极发光等分析和实验手段，对沙三段砂岩的成岩历史、成岩序列与孔隙演化及发展趋势刊物, 出成岩阶段可划分为同生期→早成岩阶段早期→早成岩阶段晚期→晚成岩阶段早期。孔隙演化主要在压实作用，粘土矿物的包膜作用，方解石、白云石的胶结作用，长石溶蚀作用、石英的次生加大和微晶石英的沉淀作用等方面进行了研究，阐述并总结了它们互相之间的内在联系。     

Broadband synthetic aperture borehole radar interferometry

Trials in mines have established that wideband VHF borehole radars (BHR), working in the 10–100-MHz band, can be used to probe the rockmass between boreholes over ranges from <5 m to as much as 150 m with submeter resolution. There is evidence that ore bodies reflect these radar signals both specularly and diffusely, much as the ground/air interface does when overflown by synthetic aperture radar (SAR). In both SAR and BHR, multiple flight lines, together with diffuse reflections admit the possibility of developing interferometric 3D images of the object. This paper examines the possibility of imaging buried objects in three dimensions by interferometrically combining broadband VHF borehole radar profiles shot in adjacent pairs of boreholes. Broadbanding in BHR has the advantage of releasing the image from 2nπ phase ambiguities, but practically, interferometric borehole radar (InBHR) needs high signal-to-noise ratios (SNR) to avoid noise capture. This means that 3D InBHR is limited to ranges in wavelengths which are less than the rock's attenuation factor Q. Interferometric methods are developed which are capable of mapping ore bodies and other structures in three dimensions. Tangent plane migration methods are developed here in order to reconstruct surfaces that lie in the near-field of sparse interferometric arrays.     

Evolution of 3D tectonic stress field and fault movement in North China

IntroductionThe research on stress field interior the Earth is an either relative old or young branch of geoscience. Early in the 20th century, in order to learn the state of inner stress field, a few scholars had used simple ideal model to analyze big scale tectonic conformations and activities according to tide, gravity, rotation and inner thermal materials. So far, lots of problems on the state of the Earth stress field have not been solved completely yet. The origin of stress field, the d…     

A Reliability Based Expert System for Assessment and Mitigation of Landslides Hazard Under Seismic Loading

Different models were developed for evaluating the probabilistic three-dimensional (3-D) stability analysis of earth slopes and embankments under earthquake loading using both the safety factor and the displacement criteria of slope failure.The probabilistic models evaluate the probability of failure under seismic loading considering the different sources of uncertainties involved in the problem. The models also take into consideration the spatial variabilities and correlations of soil properties. The developed models are incorporated in a computer program PTDDSSA.These analysis/design procedures are incorporated within a code named SARETL developed in this study for stability analysis and remediation of earthquake triggered landslides. In addition to the dynamic inertia forces, the system takes into consideration local site effects.The code is capable of assessing the landslide hazard affecting major transportation routes in the event of earthquakes and preparing earthquake induced landslide hazard maps (i.e., maps showing expected displacements and probability of slope/embankments failure) for different earthquake magnitudes and environmental conditions. It can also beused for proposing a mitigation strategy against landslides.     

Electric conductivity of Fe2SiO4–Fe3O4 spinel solid solutions

 The spinel solid solution was found to exist in the whole range between Fe₃O₄ and γ-Fe₂SiO₄ at over 10 GPa. The resistivity of Fe_{3− x} Si _x O₄ (0.0<x<0.288) was measured in the temperature range of 80∼300 K by the AC impedance method. Electron hopping between Fe³⁺ and Fe²⁺ in the octahedral site of iron-rich phases gives a large electric conductivity at room temperature. The activation energy of the electron hopping becomes larger with increasing γ-Fe₂SiO₄ component. A nonlinear change in electric conductivity is not simply caused by the statistical probability of Fe³⁺–Fe²⁺ electron hopping with increasing the total Si content. This is probably because a large number of Si⁴⁺ ions occupies the octahedral site and the adjacent Fe²⁺ keeping the local electric neutrality around Si⁴⁺ makes a cluster, which generates a local deformation by Si substitution. The temperature dependence of the conductivity of solid solutions indicates the Verwey transition temperature, which decreases from 124(±2) K at x=0 (Fe₃O₄) to 102(±5) K at x=0.288, and the electric conductivity gap at the transition temperature decreases with Si⁴⁺ substitution. Received: 15 March 2000 / Accepted: 4 September 2000