气象资料三维化技术中的插值问题

通过对不同源气象资料及数字地理信息资料的插值，实现了不同气象资料与地理信息资料分辨率的协调；从而将多种信息叠加到一起，实现了多源资料的二维、三维仿真显示。这对于模拟真实的大气空间结构、理解地形及植被对大气运动的影响、辨识各种天气系统及多种信息的融合等有积极意义。     

长江三峡工程奉节库岸边坡地下水渗流场模拟分析

长江三峡工程正常蓄水位为175m，在蓄水过程中随着库水位的抬升，必然会引起库岸边坡地下水渗流场的变化。运用3D－Modflow软件模拟了三峡工程的蓄水过程中奉节库段边坡岩土体内部地下水位的动态变化，为长江三峡工程奉节库区段移民迁建地质灾害预测与防治提供科学依据。     

The geological and geodynamic evolution of the eastern Black Sea basin: insights from 2-D and 3-D tectonic modelling

Subsidence mechanisms that may have controlled the evolution of the eastern Black Sea have been studied and simulated using a numerical model that integrates structural, thermal, isostatic and surface processes in both two- (2-D) and three-dimensions (3-D). The model enables the forward modelling of extensional basin evolution followed by deformation due to subsequent extensional and compressional events. Seismic data show that the eastern Black Sea has evolved via a sequence of interrelated tectonic events that began with early Tertiary rifting followed by several phases of compression, mainly confined to the edges of the basin. A large magnitude (approximately 12 km) of regional subsidence also occurred in the central basin throughout the Tertiary. Models that simulate the magnitude of observed fault controlled extension (β=1.13) do not reproduce the total depth of the basin. Similarly, the modelling of compressional deformation around the edges of the basin does little to enhance subsidence in the central basin. A modelling approach that quantifies lithosphere extension according to the amount of observed crustal thinning and thickening across the basin provides the closest match to overall subsidence. The modelling also shows that deep crustal and mantle–lithosphere processes can significantly influence the rate and magnitude of syn- to post-rift subsidence and shows that such mechanisms may have played an important role in forming the anomalously thin syn-rift and thick Miocene–Quaternary sequences observed in the basin. It is also suggested that extension of a 40–45 km thick pre-rift crust is required to generate the observed magnitude of total subsidence when considering a realistic bathymetry.     

Incorporation of Cr<Superscript>3+</Superscript> in dickite: a spectroscopic study

 We have investigated a well-ordered sample of natural Cr-bearing dickite from Nowa Ruda (Lower Silesia, Poland) using electron paramagnetic resonance (EPR) at X- and Q-band frequencies (9.42 and 33.97 GHz, respectively) and optical diffuse reflectance spectroscopy. The observation of the spin-forbidden transitions at 15500 and 14690 cm⁻¹ allows us to unambiguously identify the major contribution of octahedrally coordinated Cr³⁺ ions in the optical spectrum. The X- and Q-band EPR spectra show two superposed Cr³⁺ signals. The corresponding fine-structure parameters were determined at room temperature and 145 K. These results suggest the substitution of Cr³⁺ for Al³⁺ in equal proportions in the two unequivalent octahedral sites of the dickite structure. In kaolin group minerals, the distortion around Cr³⁺ ions (λ≈ 0.2–0.4) in Al sites is significantly less rhombic than that observed around Fe³⁺ ions (λ≈ 0.6–0.8). Received: 29 June 2001 / Accepted: 22 October 2001     

Sludge weathering and mobility of contaminants in soil affected by the Aznalcollar tailing dam spill (SW Spain)

As a result of the collapse of the Aznalcollar mine tailings dam, a large extension of the Guadiamar valley in SW Spain was covered with a layer of pyrite sludge. Although most of the sludge was removed, a small amount remains in the soil, constituting a potential source of water pollution. A column experiment was carried out in order to determine the rate of sludge oxidation in the soil, and the existence of metal retention processes. The column was filled with a mixture of sludge and a sandy soil common in the region. At different time intervals, the column was leached with water and the resulting solution analysed.

The pH of the water dropped to values around 2 after 260 days and then remained constant due to the buffering role of silicate dissolution. The concentration of Zn, Cd and Co in the leachates matched the expected values from flow-through experiments at atmospheric oxygen pressure. This indicates that oxygen diffusion in the pores was complete. Moreover, no efficient processes existed for retaining Zn, Cd and Co, which formed soluble salts and were entirely incorporated into the infiltrating water. During the first 2 months of the experiment, when pH was higher than 4.5, the concentrations of Fe and Al were very low. Saturation indices showed that the solution was in equilibrium with amorphous Fe(OH)₃ and Al(OH)₃. Subsequently, at lower pH values, jarosite [(Na,K)Fe₃(SO₄)₂(OH)₆] formed. This solid phase was identified by X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM). Jarosite was also responsible for the depletion of As, Pb, Sb and probably Tl in the water resulting from infiltration.     

Cathodoluminescence of authigenic albite

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).     

3D characterization of coarse aggregates

A new and accurate characterization method for dimensions, shape and roughness of aggregate particles has been developed. The method is based on the 3D-laser scanning technique and evaluation of coarse-grain aggregate-particle images. Parameters are obtained with either analytical Fourier analysis or geometrical analysis. The results from the two methods are compared with each other as well as with manual measurements. Although the Fourier-based analysis gives about 10% smaller size values, the comparison of the results shows, in general, a good agreement between the different techniques. This new method for analysis of coarse-grain aggregates gives reliable results for both the shape and topographical parameters of particles.     

Study on Paleoenvironment since Late Glacial Eooch in Lanzhou Area, China

The Hongzuisi Section in Lanzhou area is used to infer the paleoclimate since the late glacial epoch. Through combined analysis of organic carbon isotope and CaCO3 content, paleoenvironment evolution of Hongzuisi Section since the late glacial epoch is discussed. There were changes in both drymoist and warm-cold. Especially the climate changes can be compared with synchronous sections of other areas, which provides useful information for our future forecast.     

以2000年4月29日河南内乡地震为例谈谈关于计算震级误差的有关问题

2000年4月29日河南内乡发生地震，地这次地震，河南地震局台网和中国地震局台网震级量度之间有一定差异。采用不同量规函数和尾波持续时间震级公式计算发现，它们之间所产生的最大差异可达0.5-0.7级。综合分析后认为，2000年4月29日河南内乡地震震级定为ML5.0级较为适宜。     

《CT理论与应用研究》杂志新刊标和地幔速度模型的说明

在《ＣＴ理论与应用研究》杂志１９９４~２００１年本杂志“刊标”的基础上,在其上方增加了象征三维体视学成像的三角形四面体的透视图;该刊标的右下侧为医学断面成像扫描仪(包括各种Ｘ－ＣＴ机与核磁共振ＭＲＩ扫描仪等);其左下侧为三维地幔速度模型和地球核的示意图,切出有两个地幔剖面,表示纵波速度二维变化的剖面。该速度剖面系根据赵大鹏教授的理论和计算方法,按照地球上的两个大圆弧做计算和绘制的彩色图,排在本期封４:第一大圆弧,从北极经西巴基斯坦(２８°Ｎ, ６４°Ｅ)到马尔代夫群岛(３°Ｎ,７３°Ｅ);第二大圆弧从马尔代夫群岛点(３°Ｎ,７３°Ｅ)连接巴布新几内亚之南点(１２°Ｓ,１５０°Ｅ),来计算两剖面速度分布并作图的结果,其具体分布参见封４的两条彩色剖面和相应的地理位置图。由于赵教授这篇论文[１]在中国国内只有很少数图书馆收藏,在Ｅｌｓｅｖｉｅｒ Ｓｃｉｅｎｃｅ的ＥＰＳＬ网站上一般人只能查到摘要,本刊对于该地幔速度模型的制作方法和所用数据资料,该模型的优越性和特征进行了叙述,他所用的地震事件数目,多达７１２８个;用于层析反演成像的震相到时数多到近一百万条。该速度如下的特点:在所采用的速度结构中,包含用几个复杂形状的地质速度界面,如莫霍面,以及下沉板块的分界