Strength and deformation behavior of the Shimanto accretionary complex across the Nobeoka thrust

A rapid reduction in sediment porosity from 60 to 70 % at seafloor to less than 10 % at several kilometers depth can play an important role in deformation and seismicity in the shallow portion of subduction zones. We conducted deformation experiments on rocks from an ancient accretionary complex, the Shimanto Belt, across the Nobeoka Thrust to understand the deformation behaviors of rocks along plate boundary faults at seismogenic depth. Our experimental results for phyllites in the hanging wall and shale‐tuff mélanges in the footwall of the Nobeoka Thrust indicate that the Shimanto Belt rocks fail brittlely accompanied by a stress drop at effective pressures < 80 MPa, whereas they exhibit strain hardening at higher effective pressures. The transition from brittle to ductile behavior in the shale–tuff mélanges lies on the same trend in effective stress–porosity space as that for clay‐rich and tuffaceous sediments subducting into the modern Nankai subduction zone. Both the absolute yield strength and the effective pressure at the brittle–ductile transition for the phyllosilicate‐rich materials are much lower than for sandstones. These results suggest that as the clay‐rich or tuffaceous sediments subduct and their porosities are reduced, their deformation behavior gradually transitions from ductile to brittle and their yield strength increases. Our results also suggest that samples of the ancient Shimanto accretionary prism can serve as an analog for underthrust rocks at seismogenic depth in the modern Nankai Trough.     

On the morphology of radial sand ridges

We use a hydrodynamic model applied to an idealized fan-shaped basin to explore the morphology and dynamics of radial sand ridges in a convergent coastal system. A positive morphological feedback between channel incision and flow redistribution is responsible for the formation of the channel-ridge pattern. The selection mechanism of bottom wavelength is associated with flow concentration in the deeper part of the channels. Our results are compared to sediment and hydraulic dynamics in the radial sand ridges (RSRs) in China. In a convergent, sloping basin the tangentially averaged tidal velocity peaks at 47 km from the apex. This distance is similar to the arc distance, 62 km, where the RSRs are most incised. An offshore shift in tidal phase results in stronger flows near the north coastline, explaining the presence of asymmetric channel patterns. A numerical stability analysis indicates that small radial oscillations with a wavelength of 10° to 15° maximize the velocity in the troughs. This oscillation wavelength also emerges in the RSRs, which display a peak in spectral energy at a radial wavelength between 25° to 37.5°. High-resolution numerical simulations in the RSRs confirm that flow concentration occurs in the deeper part of the channels, keeping them flushed. We therefore conclude that the RSRs display morphometric characteristics similar to other tidal incisions, like tidal inlets and intertidal channels. This result further supports the dominant role of tidal prism and related peak velocities in incising coastal landscapes. © 2020 John Wiley & Sons, Ltd.     

西南印度洋中脊50°E基性超基性岩石地球化学特征及其成因初探

西南印度洋中脊是典型的慢速扩张洋中脊之一。对采自西南印度洋中脊50°E附近的7件玄武岩和蛇纹石化橄榄岩样品所作的分析表明,基性玄武岩类SiO2含量为43.72%～48.40%,TiO2含量较少,为1.14%～1.52%;MgO含量为5.96%～10.98%;TFe2O3含量为4.55%～5.2%;Mg#值为0.53～0.64,里特曼指数σ为2.34～20.10。微量元素Zr/Nb和Y/Nb比值为显示N-MORB的性质,但是其他微量元素的比值(Ba/Nb,Ba/Th,La/Nb,Nb/U,Nb/Pb)均不显示正常洋中脊玄武岩的特征,微量元素原始地幔标准化蛛网图显示强烈富集K和Pb,亏损Nb,稀土元素显示较为平缓的分配模式。超基性蛇纹石化橄榄岩的主量元素特征为SiO2为38.91～45.49;TiO2含量为0.02～0.28;MgO含量很高,为36.87～40.61,TFe2O3含量为2.82～3.91,Mg#值为0.92～0.94。微量元素中Ni,Cr的含量很高,原始地幔标准化蛛网图显示橄榄岩强烈富集K和Pb,Ba,Th,La,Ce,Ti中等程度富集,而亏损Nb,Sr。稀土元素总量较低,标准化曲线显示轻稀土元素富集模式。结合地球化学特征及前人研究资料分析认为,西南印度洋中脊的基性岩和超基性岩属同源性质,其原始地幔物质可能为部分正常洋中脊亏损地幔混染了陆壳或远洋沉积物的结果。     

Ӧ��360��ȫ��Ӱ����������ⷽ��

???360???????????????????????????????????????????????·???????????в???????????????????????YCbCr???????????????????????????????????????????Ч??????????????????????????????????????????????????????????????????????????????????Ч?????????????????÷????????360?????????е??????????????????????????????????????????????Ч?????????á?     

Modeling uncertainty of moving objects on road networks via space–time prisms

Moving objects produce trajectories, which are typically observed in a finite sample of time‐stamped locations. Between sample points, we are uncertain about the moving objects's location. When we assume extra information about an object, for instance, a (possibly location‐dependent) speed limit, we can use space–time prisms to model the uncertainty of an object's location.

Until now, space–time prisms have been studied for unconstrained movement in the 2D plane. In this paper, we study space–time prisms for objects that are constrained to travel on a road network. Movement on a road network can be viewed as essentially one‐dimensional. We describe the geometry of a space–time prism on a road network and give an algorithm to compute and visualize space–time prisms. For experiments and illustration, we have implemented this algorithm in MATHEMATICA.

Furthermore, we study the alibi query, which asks whether two moving objects could have possibly met or not. This comes down to deciding if the chains of space–time prisms produced by these moving objects intersect. We give an efficient algorithm to answer the alibi query for moving objects on a road network. This algorithm also determines where and when two moving objects may have met.     

多源遥感技术在汶川震后高精度数字高程模型重建中的精度分析

汶川地震后,震中地区地表形态遭到很大破坏.在该地区开展科学研究急需高精度数字高程模型支持,重建震区数字高程模型十分必要.本文以高精度重建该地区数字高程模型为目标,综合ALOS PRISM获取的三轨立体像对、ALOS PALSAR雷达影像和欧空局发布的汶川地震ENVISAT雷达影像等资料,采用光学遥感立体测图技术、InSAR技术,并融合已有全球数字高程模型,研究建立覆盖此地区15m分辨率的数字高程模型.在利用中国地壳运动监测网络和陆态网络工程项目实测的GPS数据进行高程精度分析后表明:ALOS PRISM DEM精度优于10 m(95％置信度);ALOS PALSAR DEM精度优于10 m(95％置信度),而ENVSAT ASAR DEM在平原、丘陵地区精度优于20 m(95％置信度).研究证明:ALOS PRISM能进行高精度的地形测量,ALOS PALSAR在山区仍可获得高精度数字高程模型,ENVISAT ASAR在平原地区的精度较高.因此融合光学、雷达遥感技术完全满足获取高精度、高分辨率震区数字高程模型的需要,这为在困难地区建立高精度数字高程模型提供了一个很好的途径.     

Bio‐geomorphic effects on tidal channel evolution: impact of vegetation establishment and tidal prism change

The long‐term (10–100 years) evolution of tidal channels is generally considered to interact with the bio‐geomorphic evolution of the surrounding intertidal platform. Here we studied how the geometric properties of tidal channels (channel drainage density and channel width) change as (1) vegetation establishes on an initially bare intertidal platform and (2) sediment accretion on the intertidal platform leads to a reduction in the tidal prism (i.e. water volume that during a tidal cycle floods to and drains back from the intertidal platform). Based on a time series of aerial photographs and digital elevation models, we derived the channel geometric properties at different time steps during the evolution from an initially low‐elevated bare tidal flat towards a high‐elevated vegetated marsh. We found that vegetation establishment causes a marked increase in channel drainage density. This is explained as the friction exerted by patches of pioneer vegetation concentrates the flow in between the vegetation patches and promotes there the erosion of channels. Once vegetation has established, continued sediment accretion and tidal prism reduction do not result in significant further changes in channel drainage density and in channel widths. We hypothesize that this is explained by a partitioning of the tidal flow between concentrated channel flow, as long as the vegetation is not submerged, and more homogeneous sheet flow as the vegetation is deeply submerged. Hence, a reduction of the tidal prism due to sediment accretion on the intertidal platform, reduces especially the volume of sheet flow (which does not affect channel geometry), while the concentrated channel flow (i.e. the landscape forming volume of water) is not much affected by the tidal prism reduction. Copyright © 2012 John Wiley & Sons, Ltd.     

Comparative study on two methods for calculating the gravitational potential of a prism

The determination of the gravitational potential of a prism plays an important role in physical geodesy and geophysics. However, there are few literatures that provide accurate approaches for determining the gravitational potential of a prism. Discrete element method can be used to determine the gravitational potential of a prism, and can approximate the true gravitational potential values with sufficient accuracy (the smaller each element is, the more accurate the result is). Although Nagy’s approach provided a closed expression, one does not know whether it is valid, due to the fact that this approach has not been confirmed in literatures. In this paper, a study on the comparison of Nagy’s approach with discrete element method is presented. The results show that Nagy’s formulas for determining the gravitational potential of a prism are valid in the domain both inside and outside the prism.     

利用全站仪测量地形要素顶部特征点的方法

本文主要研究了全站仪在三维数字地形图测绘中的应用,获得三维地形图要素的底部特征点相当简单,关键是地形要素顶部特征点利用全站仪是怎样获取的,本文通过几种方法和对应的实测数据对这方面问题进行了研究和分析,最后得出全站仪测量三维数字地形图可行性.