Late-Stage Ductile Deformation in Xiongdian-Suhe HP Metamorphic Unit, North-Western Dabie Shan, Central China

New structural and petrological data unveil a very complicated ductile deformation history of the Xiongdian-Suhe HP metamorphic unit, north-western Dabie Shun, central China. The finegrained symplectic amphibolite-facies assemblage and coronal structure enveloping eclogite-facies garnet,omphacite and phengite etc., representing strain-free decompression and retrogressive metamorphism,are considered as the main criteria to distinguish between the early-stage deformation under HP metamorphic conditions related to the continental deep subduction and collision, and the late-stage deformation under amphibolite to greenschist-facies conditions occurred in the post-eclogite exhumation processes.Two late-stages of widely developed, sequential ductile deformations D3 and D4, are recognized on the basis of penetrative fabrics and mineral aggregates in the Xiongdian-Suhe HP metamorphic unit, which shows clear, regionally, consistent overprinting relationships. D3 fabrics are best preserved in the Suhe tract of low post-D3 deformation intensity and characterized by steeply dipping layered mylonitic amphibolites associated with doubly vergent folds. They are attributed to a phase of tectonism linked to the initial exhumation of the HP rocks and involved crustal shortening with the development of upright structures and the widespread emplacement of garnet-bearing granites and felsic dikes. D4 structures are attributed to the main episode of ductile extension (D^24) with a gently dipping foliation to the north and common intrafolial, recumbent folds in the Xiongdian tract, followed by normal sense top-to-the northductile shearing (D^24) along an important tectonic boundary, the so-called Majiawa-Hexiwan fault (MHF), the westward continuation of the Balifan-Mozitan-Xiaotian fault (BMXF) of the northern Dabie Shan. It is indicated that the two stages of ductile deformation observed in the Xiongdian-Suhe HP metamorphic unit, reflecting the post-eclogite compressional or extrusion wedge formation, the subhorizontal ductile extension and crustal thinning as well as the top-to-the north shearing along the high-angle ductile shear zones responsible for exhumation of the HP unit as a coherent slab, are consistent with those recognized in the Dabie-Sulu UHP and HP metamorphic belts, suggesting that they were closely associated in time and space. The Xiongdian-Suhe HP metamorphic unit thus forms part of the Triassic(250-230 Ma) collision orogenic belt, and can not connect with the South Altun-North Qaidam-North Qinline UHP metamorphic belt formed durin~ the Early Paleozoic (500-400Ma).     

个旧高松矿田大箐东矿段深部铜锡矿床成矿模式

成矿燕山中晚期花岗岩受构造、岩性联合控制,沿断裂“扎根”部位显岩舌、岩枝状产出,形成多层次凹陷,其中的锡铜多金属矿床是个旧矿区最低赋矿标高(900m),也是深部找矿的突破,从而建立深部有利部位四类成矿模式.     

渤海湾盆地济阳坳陷沙河街组四段地层水特征及成盐指示

济阳坳陷是渤海湾盆地发育厚层含盐系地层的坳陷之一,其地层水的特征是研究中国东部裂谷系湖盆演化及成盐规律的重要媒介。济阳坳陷沙河街组地层水矿化度平均值从沙四段的41.2 g/L向浅部逐渐降低到14.2 g/L,反映了咸化湖盆逐渐淡化的趋势。沙河街组四段主要离子浓度与矿化度的关系表明,湖盆演化主要处于石盐析出阶段,且地层水物质组成具有富钙贫镁的特征。在平面上,东营凹陷矿化度最高,湖水经历了高度浓缩,在靠近陡坡带一侧的洼陷部位为地层水的高值区,发育厚层膏盐岩,向缓坡带一侧受陆源水系影响逐渐淡化。靠近陡坡带一侧的洼陷部位是成盐的有利区域,并具备形成富钾卤水矿的条件。     

泌阳凹陷安棚油田核三段储层天然裂缝特征研究

根据岩芯裂缝观察结果,通过与FMI,MAIN成像测井资料进行对比,系统描述天然裂缝在成像测井上的影像特征,对地层裂缝特征参数进行了确定.成果反映出核三段地层中的裂缝主要为垂直裂缝倾角在80°～90°之间.走向在100°～110°左右,宽度一般小于1 mm,裂缝长度主要在30 mm以内.     

晋江河口及泉州湾湿地生物分布特点

泉州湾受晋江河口径流影响很大，导致湿地生物的水平分布与盐度的分布紧密相关．大致分为湾外和外湾种、内湾低盐种、感潮河段咸淡水种．长腕和尚蟹、扁平蛛网海胆和文昌鱼仅分布在外湾或湾外的砂质海底．3种红树植物、互花米草、招潮蟹、弹涂鱼是内湾泥滩的优势种．咸水草是感潮河段咸淡水指标种．河蚬虽是淡水种，也分布在低盐河段．     

基于Mindlin解的压力型锚杆锚固段的受力分析

假设锚杆为与周围介质相同的材料,视锚杆作用的岩土体为弹性半空间位移体;基于Mindlin位移解,求出集中力作用下周围岩土体沿锚固体的轴向位移;根据压力型锚杆锚固段的受力状态,计算锚固体在轴向荷载作用下压缩变形,利用锚固体与周围岩土体变形协调假定,推导出锚固段轴向应力和剪应力分布的理论解。经过与已有现场试验实测数据对比分析,验证了理论解的可行性,并在此基础上讨论了相关岩土参数对锚固段轴向应力和剪应力的影响。锚杆现场试验和理论分析结果表明:压力型锚杆的锚固段所受轴向应力和剪应力与锚固力成正比;压力型锚杆的锚固段所受剪应力的分布形式受周围岩土体弹模、泊松比以及锚固体与周围岩土体界面的内摩擦角等因素的影响。其中周围岩土体的弹模影响最大。     

云南剑川新民铁矿地质及成因

新民铁矿位于北北西—南南东向雪龙山—桥后断裂（弥沙河断裂）东侧之云岭褶皱束三级构造单元中,赋矿层位为中三叠统上兰组下亚段泥质灰岩.地层、构造控矿,为沉积—后期改造型铁矿床.     

凝缩段的地质意义和作用

凝缩段是层序地层学中很重要的标志层，它虽然岩性单调，但引人注目，是沉积作用极不活跃的产物，而这种不活跃有利于金属矿质缓慢聚集和沉淀，因而它与成矿作用密不可分。在地质学上具广泛作用，是指示古板块、层序地层、地层划分与对比、岩相等方面的良好标志。     

云南大姚地区上白垩统马头山组六苴段中亚段

上白垩统马头山组六苴段中亚段(K2ml2)是云南六苴砂岩型铜矿区内含铜层位之一。六苴段中亚段含铜砂岩Mo、Cd、As、Cu等亲硫元素富集。微量元素多富集于浅色砂岩中,向紫色砂岩一侧逐渐亏损,呈现分带特征。铜矿石V/(V+Ni)值大于0.7,反映缺氧环境的特点。稀土元素总量(∑REE)101.71×10-6～157.55×10-6,稀土元素分配模式为Eu、Ce亏损-轻稀土元素富集型。从铜矿石→浅色矿化砂岩→浅色无矿砂岩,随着铜含量的降低,Mo、Cd、As、Hg平均含量逐渐降低,∑REE与高场强元素Nb、 Zr、 Hf、Th平均含量逐渐升高。六苴段中亚段砂岩具“矿源层”的特征,铜矿石与围岩具物源一致性,铜矿石在弱碱性、还原条件下由砂岩经水-岩作用形成,与六苴铜矿床(K2ml1)成矿机理相似。小河地段纵向上从北向南,六苴段中亚段中铜矿化的能力逐渐减弱,推测矿化带在走向上向西(紫色砂岩一侧)发生了偏移。     

米兰科维奇旋回识别与天文标尺的建立:以莫索湾地区莫21井三工河组一段为例

依据米兰科维奇理论识别划分旋回,是对传统层序地层学的有力补充,具备高等时约束性,可实现高分辨率旋回识别与高精度等时地层格架的建立.莫索湾地区是准噶尔盆地油气勘探的有利区域之一,其中三工河组一段发育了有效的、成规模的致密气储集层.利用自然伽马测井数据,通过频谱分析等方法,对研究区目标层位进行了米兰科维奇信号识别与旋回划分...