基于共反射点叠加的观测参数选择

在地震勘探数据处理中，通常采用的共中心点(CMP)叠加技术对于复杂的地质构造难以取得好的效果。若通过从道间距、覆盖次数等观测参数与目标层地层倾角、共反射点离散度的关系出发，并结合模型正演，对复杂构造地层的观测参数选取进行优化，使之能对目标层尤其是逆断层下降盘的阴影层段进行较充分的“照明”，即可得到共反射点叠加剖面，这对共反射点叠加是一项有益的研究。     

小波模变换技术在探地雷达资料中的应用

通过研究探地雷达信号的小波变换的模特征点的变化规律和特征,揭示了探地雷达信号奇异点和其小波变换模极值的关系。通过这些关系的研究,对小波各级分解的模特征点进行变频域处理。最后对处理后的地质雷达信号,利用非线性最小二乘方法求解李氏指数,从而进行地质体边界的检测。无论从理论模型的论证还是实际资料的处理都取得了较好的结果。     

Data Fusion in Distributed Multi-sensor System

This paper presents a data fusion method in distributed multi-sensor system including GPS and INS sensors“ data processing. First, a residual X^2-test strategy with the corresponding algorithm is designed.Then a coefficient matrices calculation method of the information sharing principle is derived. Finally, the federated Kalman filter is used to combine these independent, parallel, real-time data. A pseudolite (PL) simulation example is given.     

软基沉降观测及其数据处理方法

简述了高速公路软基沉降观测及其数据处理的目的和意义；介绍了沉降观测的布点原则；提出了高速公路软基沉降观测的技术要求；介绍了基于VB的高速公路软基沉降观测数据处理软件；在实际工程中，由于种种原因，会造成沉降观测数据不连续。本文就沉降观测数据不连续时的沉降量估算提出了三种处理方法，在实际工程应用中起到了较大的作用。     

沉降观测数据分析方法探讨

分析沉降数据处理及信息挖掘的基本方法,结合GIS软件,通过实例讨论沉降数据分析的可视化问题,为工业广场及大型建筑物形变监测提供依据.     

基于扫描矢量化地图数据生产的数据质量控制

概述了基于扫描矢量化GIS数据的生产过程 ,介绍了扫描矢量化质量控制的策略和方法 ,在地图扫描阶段采用栅格图纠正的方法对地图的变形进行纠正 ,以提高矢量化原图的质量 ,在基于扫描矢量化GIS数据的生产过程中 ,可从算法和软件使用工艺方面提高数据的质量     

江汉--洞庭湖平原区构造沉降GPS监测的试验与研究

地质构造沉降是地壳的一个长期、缓慢运动过程。开展区域性地质构造沉降GPS监测研究，对地质调查具有十分重要的意义。介绍了高精度GPS高程测量在江汉～洞庭湖平原区构造沉降观测中的数据处理方法，并得出了一些有益的结论。     

2D Seismic Data Processing for Straight Lines in the Loess Plateaus in Fuxian of Shanbei

The crooked seismic lines along valleys were irregular previously in Fuxian of Shanbei,showing an irregular branch in plane, and hard to complete close grids. Therefore, it‘s difficult to conduct reservoir inversion of 2D seismic data. In 2001, Zhongyuan Oilfield Company carried out the study on field acquisition methods and seismic processing technology in Fuxian. Straight lines were passing through plateaus and formed seismic grids by using flexible geometry with variable linear bins.Data processing involved model-inversion based refraction static correction, surface consistent amplitude compensation, deconvolution, and pre-stack noise attenuation. As the result, seismic data with a high fidelity was provided for the subsequent reservoir predictions, small-amplitude structure interpretation and integrative geologic study. Because all lines were jointed to form grids, comprehensive interpretation of reservoir inversion could be finally implemented by using the pseudo logging method to control lines without wells.     

鄂尔多斯盆地南部的黄土塬区地震资料处理与解释,第一部分:地震资料处理

Branching river channels and the coexistence of valleys, ridges, hiils, and slopes＇as the result of long-term weathering and erosion form the unique loess topography. The Changqing Geophysical Company, working in these complex conditions, has established a suite of technologies for high-fidelity processing and fine interpretation of seismic data. This article introduces the processes involved in the data processing and interpretation and illustrates the results.     

放射性勘探探寻油气藏的试验效果

对应用放射性直接探寻油气藏勘探试验所取得已知油藏区的资料进行了综合分析。总结了油气藏上方放射性异常的规律;探讨了放射性异常与油气藏的关系。对放射性异常的数据处理方法及应用放射性方法探寻油气藏的应用效果进行了剖析。指出:在实际应用中,氡浓度测量在勘查油气藏方面比伽玛能谱总量和伽玛能谱具有较好的应用效果。