Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

结构动力反应分析的三阶显式方法

本通过对传统动力反应分析方法的总结，阐明了建立隐式和显式方法的一般思路及数学本质，提出了使用系统位移反向向量三阶导数的隐工和实用显式积分方法－3阶显式方法，分析了该显式方法的精度和稳定性，并对建立更高阶隐式和显式方法以及方法的精度和稳定性作了初步讨论。最后，通过算例对本方法、献[1]方法和经典的常平均加速度法（隐式方法、视为精确解）的精度和稳定性进行了比较分析。结果表明，本方法具有明显的优点。     

海洋平台结构振动的AMD主动控制参数优化分析

本文针对海洋平台结构的冰激振动和地震反应控制问题，提出了采用AMD主动控制的控制策略，结合JZ20－2MUQ平台结构进行了AMD控制系统的硬参数和软参数的优化分析，并就相应于最优参数下的AMD控制海洋平台结构冰激振动和地震反应的几种代表性工况进行了时程分析，得到了一些定性和定量的结论，为实际工程的控制设计提供了基础。本文提出的AMD主动控制方法对类似的海洋平台结构的控制问题也有参考价值。     

喀什"奇异震群"与构造地震的对比研究

20 0 1年 11月 14、 15日新疆喀什台记录到 86次振动事件 (“奇异震群”事件 )。为识别其性质 ,应用波谱分析、偏振分析等方法 ,对该事件和同范围构造地震的地震波特征进行了对比研究 ,发现 :(1)喀什“震群”的全波列衰减比构造地震的全波列衰减快很多 ;(2 )与构造地震的速度谱相比 ,“震群”的频谱相对较为“集中”,而构造地震的则较为“发散”;(3)“震群”位移谱的拐角频率和卓越频率均较构造地震的相应量高出一倍多 ,且离散较小。通过对喀什“奇异震群”这些特征进行分析研究 ,认为这一事件极有可能是人工事件     

Evaluation of the seismic hazard of Lebanon

This paper presents the results of a study undertaken todetermine the seismic hazard of Lebanon. The seismic hazard evaluation wasconducted using probabilistic methods of hazard analysis. Potential sourcesof seismic activities that affect Lebanon were identified and the earthquakerecurrence relationships of these sources were developed from instrumentalseismology data, historical records, and earlier studies undertaken toevaluate the seismic hazard of neighboring countries. The sensitivityof the results to different assumptions regarding the seismic sources in theLebanese segment and choice of the attenuation relationship wasevaluated. Maps of peak ground acceleration contours, based on 10percent of probability of exceedance in 50 years and 100 years time spans,were developed.     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

河南郑州台数字化DSQ水管倾斜仪观测精度的评定

选取了河南郑州台数字化 DSQ型水管倾斜仪观测资料较好的 2 0 0 1年 10月 1日至 12月 31日的数据进行了分析处理 ,对该仪器的观测精度进行了评定。经计算 ,其北南向和东西向日飘移分别为 0 .0 0 0 7s和 0 .0 0 2 6 s,M2 的振幅因子为 0 .714 9和 0 .6 4 14 ,振幅因子中误差为 0 .0 0 5 5和0 .0 0 4 4。     

F-K分析在上海地震台阵建设中的应用

利用F K分析处理地震台阵数据 ,进行地震波场分析 ,按频率分量、速度矢量来分解几乎同时到达台阵的信号 ,识别不同慢度的波 ,有助于地震波类型鉴别研究 .主要讨论了F K分析具体实现的方法和如何应用于上海地震台阵的选址与建设     

Precise revision of the garnet-muscovite geothermometer

The garnet-muscovite geothermometer was refined through empirical calibration by using natural rocks metamorphosed under the physical conditions of 238—1306 MPa and 490—700℃. Input temperatures and pressures were determined through simultaneously applying the garnet-biotite geothermometer and the garnet-biotite-plagioclase-quartz barometer, assuming that all FeO in muscovite and garnet be ferrous. Garnet was treated as the asymmetric quaternary solid solution, and muscovite as the symmetric binary solid solution. Input muscovite compositions include Fe atoms between 0.03—0.19 and Mg atoms between 0.04—0.16 on the basis of 11 oxygen atoms, and input garnet compositions include spessartine fractions between 0.01—0.289, grossular fractions between 0.028—0.273, and the Fe/Mg ratio between 3.387-18.986. The resulting garnet-muscovite geothermometer reproduces temperatures within (50℃ compared with the garnet-biotite thermometer. Total random error of ±37℃ of the new thermometer may stem from the pressure uncertainty of ±200 MPa, and uncertainties of ±5% of Fe and Mg components in muscovite, and ±5% of Fe, Mg, Mn and Ca components in garnet, altogether. When there exist 10%, 20%, 30%, 40% and 50% Fe3+ in muscovite, respectively, the computed garnet-muscovite temperatures will be 1—6℃, 2—12℃, 3—16℃, 5—24℃ and 7—29℃, respectively, lower than those obtained when assuming that all FeO be ferrous. The new garnet-muscovite geothermometer can efficiently reflect temperature change of typical prograde sequences and contact aureole rocks, and may be applied to low- to high-grade and low- to high-pressure metamorphic rocks.