P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

Atmospheric radiative transfer simulation for atmospheric correction of remote sensing data

IntroductionThe radiance leaving the earth-atmosphere sys-tem which can be sensed by a satellite borne ra-diometer is the sum of radiation emission fromtheearth surface and each atmospheric level that aretransmittedtothe top of the atmosphere.The radia-tion emissionfromthe earthsurface andthe radianceof each atmospheric level can be separated fromtheradiance at the top the atmospheric level a satellitemeasured.Thus,the earth surface parameters willbe retrieved from the surface radiance after a…     

差分法周跳探测与修复方法改进

在目前常用的周跳探测与修复方法基础上 ,提出了首先将观测资料按照观测历元不连续分成若干小弧段 ,然后利用差分法进行周跳探测 ,根据差分后周跳放大的特性判断周跳和野值 ,并确定其位置利用宽带组合和电离层组合的方法解算周跳大小。通过实例验证了其有效性。     

调频式电涡传感器微机实现的探讨

分析了分频和ＣＴＣ计数采样中误读数的原因和解决方法，并利用微机软件实现非线性校正。此传感器用于位移测量系统中，具有０．０１ｍｍ的分辨率及优于１％的精度，可在－２０～６０℃温度范围内工作。     

DCMT光电扫描主测微器的设计与研究

DCMT主测微器不同于其它类型的子午环测微器,它具有自校准测定仪器参数的功能。该测微器采用了活动光栅的方案,其优点是能观测近极星和各类准直像;活动光栅另一个显著优点是不同赤纬星几乎可用相同的观测时间.对“V”形光栅的工作原理和误差进行了详细讨论,并给出了一组严格的公式。其系统误差来源有:光栅形状改正、光栅驱动方向相对于光栅的倾斜、光栅驱动方向相对于赤径方向的倾斜、星径曲率改正。     

Optical spectrum based measurement of flotation slurry contents

Monitoring and control of a flotation circuit is mainly based on the information gained by assaying the process slurry lines. In flotation plants, usually an X-ray fluorescence analyzer is used to obtain the on-line assays. This article introduces the visual and near-infrared reflectance spectroscopic analysis of the process slurries as a supplementary method which complements the on-line assay information available from an X-ray fluorescence analyzer. It is shown that the spectral information can be used to accurately predict the element contents in the slurry in between successive XRF analyses. Since the spectral measurements can be taken with high frequency as opposed to the sparse X-ray fluorescence analysis, a practically continuous on-line estimate of the slurry contents is reached. These estimates can be used in the plant control to improve the overall performance of the circuits and to yield also economical savings. Additionally, the frequent monitoring of the grades can provide means to eliminate rapid disturbances in the circuits, thus improving the stability of the process.     

PSO-RBFNN模型及其在岩土工程非线性时间序列预测中的应用

岩土工程受力变形演化是一个典型的非线性问题,其演化的高度非线性和复杂性,很难用简单的力学、数学模型描述,但可用粒子群优化径向基神经网络对岩土工程应力、位移非线性时间序列进行动态实时预测。网络径向基层的单元数通过均值聚类法确定后,所有其它参数：中心位置、形状参数、网络权值,均通过粒子群优化算法在全局空间优化确定。工程实例应用表明,该模型预测结果准确、精度高,有良好的应用前景。     

海洋石油管道单点提升分析

基于管道微单元体平衡建立了海管单点提升的非线性力学模型的控制微分方程组 ,使用变弧长的无量纲代换将动边界问题化为固定边界的两点边值问题 ,利用Maple环境下编制的两点边值问题的打靶法程序得到了该问题在各个提升阶段的数值解答和在单点提升过程中管道的极限弯矩约为 0 .71q1 3(EI) 2 3。     

大气垂直速度计算中校正方法的探讨

本文对大气运动中垂直速度ｗ计算中的几种校正方法作了分析比较，并在前人工作的基础上，对校正方法作了改进，提出了进行低通滤波、散度校正和法线风分量校正的方法。通过这些校正，使计算出的平均散度和垂直速度的垂直廓线能维持原计算曲线的形式，并能满足整个气层连续方程积分为零的条件，也符合误差随高度增大的情况。